Thank you for purchasing the Bubble Blast™ by American DJ®. Every
Bubble Blast™ has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your xture for any damage and be
sure all accessories necessary to operate the unit have arrived intact.
In the event damage has been found or parts are missing, please
contact our toll free customer support number for further instructions.
Please, do not return this unit to your dealer without rst contacting
customer support.
Instructions:
Bubbles, bubbles and more bubbles! The Bubble Blast is a high output
bubble machine capable of creating hundreds of bubbles a minute.
This unit comes with a detachable timer remote that will allow the unit
to be controlled remotely. To optimize the performance of this product, please read these operating instructions carefully to familiarize
yourself with the basic operations of this unit. Be sure you understand
these instructions completely before attempting to operate this unit.
Customer Support:
American DJ® provides a toll free customer support line, to provide
set up and installation help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments
or suggestions. Toll free customer service hours are Monday through
Friday 9:00 a.m. to 5:00 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2610
E-mail: support@americandj.com
5/03
User Instructions
American DJ
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt to make any type of repair yourself without the manufactures
consent, doing so will void your manufactures warranty. In the unlikely
event your unit may require service please contact American DJ® customer support for further instructions.
Bubble Blast™ Features Bubble Blast™ Safety Precautions
• Keep the outside of this device dry at all times. Do not spill water
or other liquids into or on to your unit. Be sure all bubble juice is
kept inside the uid tray! To prevent re or shock hazard, do not
expose this product to rain or moisture.
• Do not spill water or other liquids into or on to your unit
• Do not attempt to operate this unit if the power cord has been fray ed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and re in case of an internal short
• Disconnect from main power before making any type of connection
• Do not remove the cover under any conditions. There are no user
serviceable parts inside
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall
• Do not attempt to operate this unit, if it becomes damaged
• This unit is intended for indoor use only, use of this product out doors voids all warranties
• During long periods of non-use, disconnect the unit’s main power
• Always mount this unit in safe and stable matter
• Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (in cluding ampliers) that produce heat.
• The xture should be serviced by qualied service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
• High velocity fans
• Easy accessible fluid tray
• Dual output system
• Secondary Lift System to lift bubbles into the air
• High bubble output
• Low current draw
• Rugged Rust Proof Construction
• Optional Timer Remote Control
• Drain Spout located on the back
Bubble Blast™ Product Registration
The BUBBLE BLAST™ carries a one year (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Bubble Blast™ Power Supply
Power Supply: Before plugging your unit in, be sure the source volt-
age in your area matches the required voltage for your American DJ®
Bubble Blast.™ The American DJ® Bubble Blast™ is available in a 115v
and 230v version. Because line voltage may vary from venue to venue,
be sure to plug your unit into a matching wall outlet before attempting
to operate.
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future
reference.
1. Place the Bubble Blast™ on a at level surface.
2. Fill the top tray, using premium American DJ® brand bubble juice.
Be sure not to over ll the tray to avoid spilling.
Operation:
Once the tray has been lled. You may place the unit on at level
surface. The power switch on the right will activate the unit, while the
power switch on the left will activate the optional remote control. Flip
the right power switch to the “ON” position and watch the bubbles
come out by the hundreds. Be sure the unit remains in a level position
to avoid accidental leaking.
Remote Operation (Optional):
The unit may be used with an optional timer remote that can be used
to control an output interval and duration. Always be sure to connect
the remote to the jack on the rear of the unit prior to applying main
power.
Remote Operation:
1. Plug the timer remote control into the unit.
2. Flip the main power switch on the unit to the “ON” position.
3. Push the power button on the remote to the “ON” position, main
power will be indicated by a glowing red LED above the remote
power button.
4. For a constant steady stream of bubbles press the “CONS-
STANT” button. An amber LED will glow indicating the unit is
in constant output mode. Or press the “TIMER” button for timer
operation. A green LED will glow indicating the unit is in timer
mode.
5. For timer mode operation see the next section.
Duration Knob - This knob
is used the control the blast
duration when the unit is in
“TIMER” mode. The blast
duration can range from 1 seconds to 10 seconds. Turning
the knob in clockwise direction
will increase the duration.
Timer Button - This button
activates timer mode. When
this mode is activated a green
LED above the this button
will glow. Use the “TIME” and
“DURATION” knobs to adjust
the timer settings.
Power Button - When the
remote is connected to the
unit, this button will control
the unit’s main power. When
the unit is powered, a red
LED above the this button
will glow.
Inteval Knob - This knob is
used the control the time interval between blast when the
unit is in “TIMER” mode. The
time interval can be adjusted
to range from 5 seconds to 10
seconds. Turning the knob in a
clockwise direction will increase
the interval.
Constant Button - This
button is used to activate
constant mode. When this
mode is activated the unit will
continually produce bubbles
until the unit is turned off or
the reservoir is emptied.
A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be
free of manufacturing defects in material and workmanship for a period of one year (365
days) from the date of purchase. This warranty shall be valid only if the product is purchased within the United States of America, including possessions and territories. It is the
owner’s responsibility to establish the date and place of purchase by acceptable evidence,
at the time service is sought.
B. For warranty service, send the product only to the American DJ® factory. All shipping
charges must be pre-paid. If the requested repairs or service (including parts replacement)
are within the terms of this warranty, American DJ® will pay return shipping charges only
to a designated point within the United States. If the entire instrument is sent, it must be
shipped in its original package. No accessories should be shipped with the product. If any
accessories are shipped with the product, American DJ® shall have no liability whatsoever
for loss of or damage to any such accessories, nor for the safe return thereof.
C. This warranty is void if the serial number has been altered or removed; if the product is
modied in any manner which American DJ® concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than
the American DJ® factory unless prior written authorization was issued to purchaser by
American DJ®; if the product is damaged because not properly maintained as set forth in
the instruction manual.
D. This is not a service contract, and this warranty does not include maintenance, cleaning
or periodic check-up. During the period specied above, American DJ® will replace defective parts at its expense, and will absorb all expenses for warranty service and repair labor
by reason of defects in material or workmanship. The sole responsibility of American DJ®
under this warranty shall be limited to the repair of the product, or replacement thereof,
including parts, at the sole discretion of American DJ®. All products covered by this warranty were manufactured after January 1, 1990, and bear identifying marks to that effect.
Bubble Blast™ Specifications
MODEL: BUBBLE BLAST™
VOLTAGE*: 120V~60Hz
DIMENSIONS:
WEIGHT:
19.1” x 15.5” x 19”
32Lbs. / 14.5 kgs
BREAKER: 2 AMP
WORKING POSITION: FLAT LEVEL POSITION
TRAY CAPACITY: 1.75 LITERS
COOLING: FAN COOLED
DUTY CYCLE: NONE
* Voltage is preset at the factory and is not user selectable
Please Note: Specications and improvements in the design
of this unit and this manual are subject to change without any
prior written notice.
E. American DJ® reserves the right to make changes in design and/or improvements upon
its products without any obligation to include these changes in any products theretofore
manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with products described above. Except to the extent prohibited by applicable
law, all implied warranties made by American DJ® in connection with this product, including warranties of merchantability or tness, are limited in duration to the warranty period
set forth above. And no warranties, whether expressed or implied, including warranties of
merchantability or tness, shall apply to this product after said period has expired. The
consumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly
provided above; and under no circumstances shall American DJ® be liable for any loss or
damage, direct or consequential, arising out of the use of, or inability to use, this product.
G. This warranty is the only written warranty applicable to American DJ® Products and
supersedes all prior warranties and written descriptions of warranty terms and conditions
heretofore published.