ADEMCO CE2R, CE2Y, WELY, CE2RLX, CE2YLX Survival Manual
...
Model Numbers:
Setup made easy:
blink once, then flash to indicate the
Press the #1 button on the remote
F
CE2Y = 3 button “Yellow”
F
CE2R = 3 button “Red”
F
CE2YLX = 4 button “Yellow”
F
CE2RLX = 4 button “Red”
F
WELY = 1 button panic “Yellow”
F
WELR = 1 button panic “Red”
Code-Encryptor II
Street-Smart security universal add-on keyfob system
Panel Compatibility:
1) Connect CE2 to panel keypad bus.
(With panel powered up)
2) After power up CE2, LED will
type of control that was reco gnized.
3) Program the user code:
Ø
Press and hold the button on the
receiver.
Ø
The LED will come on for 3
F
“Yellow”
Ø
Ademco (addr 03 or 17)
Ø
DSC
Ø
Napco 100E (addr 02)
Ø
Moose (addr 04)
Ø
Caddx 8600E/8980E
F
“Red”
Ø
FBII (addr 08)
Ø
Napco Express/Gemini
Ø
Napco P400/P600/P800
Ø
Caddx NX6/NX8
FEATURES
F
Functions: Away, Stay, Disarm,
Garage door opener, Panic.
F
7 remotes per receiver
F
1 receiver per panel
F
Status LED
seconds.
Ø
After the LED turns off, release
the button.
Ø
The LED will begin flashing.
Ø
Slowly and firmly enter the 4digit user code at the system
keypad.
Ø
The LED should stop flashing.
Add more remotes:
1) Key 78738 on the system
keypad.
The system will arm stay.
2)
until the system disarms
Note: the remotes included with the CE2 are
enrolled from the factory.
Delete all remotes :
Key 76278 on the system keypad. The
keypad should beep or flash the lights.
F
Universal unit
– Works on multiple manufacturers panels.
Loading...