Ademco TH8732WF01 User Manual

Lyric™ Thermostat

33-00031EFS-01

SUBMITTAL SHEET

APPLICATION

The Lyric Thermostat is a Wi-Fi enabled comfort system designed to be easy to use as well as maximizes home comfort. Lyric provides control of single stage and multi stage conventional and heat pump heating and cooling systems. The thermostat controls up to 2 heat / 2 cool conventional systems and up to 3 heat / 2 cool heat pump systems. The

thermostat also controls humidication, dehumidication or ventilation

through the Lyric App.

• Automatically maintains comfort by considering temperature,

humidity and weather

• Control from anywhere by smartphone or tablet

• No complex menus. One-touch buttons save you time

• Smart alerts remind you of lter changes and warn you of extreme

indoor conditions

• Weather information to help plan your day

SPECIFICATIONS

Includes:

Lyric Wi-Fi thermostat

Lyric App for Android or iOS

AAA Lithium battery, wall plate, wall cover and mounting screws

Requirements:

802.11 b/g/n home wireless router

Android or iOS smartphone, tablet or device

Models:

TH8732WF5018

TH8732WF5034

Terminal Designations:

U1B, U1A, C, L, G, K, Y, Y2, W (O/B), W2 (Aux/E), R, Rc

Electrical Ratings:

Terminal Voltage

W - O/B (heating) W2 - Aux/E (heating)

Y (cooling) 18 to 30 VAC 1.00A Y2 (cooling) 18 to 30 VAC 0.60A K 18 to 30 VAC 1.00A G (fan) 18 to 30 VAC 0.50A L (output) 18 to 30 VAC 1.00A

U1B, U1A

Power Consumption:

Full brightness = 3.0 VA

Wi-Fi Communication: 2.4GHz range Temperature Setting Range:

Heating: 40 to 90 °F (4.5 to 32 °C) Cooling: 50 to 99 °F (10 to 37 °C)

Temperature Sensor Accuracy:

± 1.5 °F at 70 °F (0.75 °C at 21.0 °C)

Humidication Setting Range: 10% to 60% RH Dehumidication Setting Range: 40% to 80% RH

Humidity Display Range: 0% to 99% Humidity Sensor Accuracy:

± 5% RH from 30% to 50% RH at 75 °F (24 °C)

Cool Indication: Displays the snowake icon in cooling mode. Heat Indication: Displays the sun icon in heating mode. Mounting Means:

Thermostat: The thermostat is mounted via a wall plate. The wall

plate is mounted directly on the wall in the living space, using

mounting screws provided. The thermostat is then snapped directly onto the wall plate.

Trim Ring (Optional): The wall plate is rst attached to the trim

ring. The trim ring and wall plate are then mounted directly

on the wall in the living space, using mounting screws and

anchors provided.

(50/60 Hz)

18 to 30 VAC 1.00A

18 to 30 VAC 0.60A

18 to 30 VAC 0.10 A

Max. Current Rating

Job Name

Engineer

Mechanical Contractor

Contractor’s P.O. No.

Representative

Notes

Model(s) Qty.

TH8732WF5018 TH8732WF5034

Approval

Service

Tag No.

Product Part Number Operating Ambient

TH8732WF5018

Thermostat

TH8732WF5034

Temperature

32 to 120 °F

(0 to 48.9 °C)

32 to 120 °F

(0 to 48.9 °C)

Operating

Relative

Humidity

5% to 90% Non-Condensing

5% to 95% Non-Condensing

Shipping

Temperature

-20 to 120 °F

(-28.9 to 48.9 °C)

-20 to 120 °F

(-28.9 to 48.9 °C)

Physical Dimensions in mm

(Height x Width x Depth)

96.5 x 96.5 x 22.49 White

Color(s)

REGULATOR INFORMATION

FCC Compliance Statement (Part 15.19) (USA only)

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

FCC Warning (Part 15.21) (USA only)

Changes or modications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

FCC Interference Statement (Part 15.105 (b)) (USA only)

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Thermostats

To comply with FCC and Industry Canada RF exposure limits for general population/ uncontrolled exposure, the antenna(s) used

for these transmitters must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Section 7.1.2 of RSS-GEN

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of type and maximum (or lesser)

gain approved for the transmitter by Industry Canada. To reduce

potential radio interference to other users, the antenna type and

its gain should be so chosen that the equivalent isotropically

radiated power (e.i.r.p.) is not more than that necessary for

successful communication.

Section 7.1.3 of RSS-GEN

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including

interference that may cause undesired operation of the device.

Automation and Control Solutions

Honeywell International Inc. 1985 Douglas Drive North

Golden Valley, MN 55422

customer.honeywell.com

® U.S. Registered Trademark

33-00031EFS—01 M.S. 04-14

Printed in United States

+ 2 hidden pages