Ademco TH6320WF02 User Manual

User Guide
FocusPRO® TH6320WF Wi-Fi Series
Programmable Thermostat
In the box you will find
• User Guide
• Quick Reference Card
69-2736EFS—05 ii
Welcome
Congratulations on your purchase of a Honeywell Wi-Fi programmable thermostat. When registered to Honeywell’s Total Connect Comfort Solutions, you can remotely monitor and control the heating and cooling system in your home or business—you can stay connected to your comfort system wherever you go.
Honeywell’s Total Connect Comfort is the perfect solution if you travel frequently, own a vacation home, a business or manage an Investment property or if you are simply looking for peace of mind.
This thermostat works with common 24 volt systems such as forced air, hydronic, heat pump, oil, gas, and electric. It will not work with millivolt systems, such as a gas fireplace, or with 120/240 volt systems such as baseboard electric heat.
MERCURY NOTICE: Do not place your old thermostat in the trash if it contains mercury in a sealed tube. Contact the Thermostat Recycling Corporation at www.thermostat-recycle.org or 1-800-238-8192 for information on how and where to properly and safely dispose of your old thermostat.
NOTICE: To avoid possible compressor damage, do not run air conditioner if the outside temperature drops below 50°F (10°C).
Need help?
Visit http://yourhome.honeywell.com or call 1-855-733-5465 for assistance.
69-2736EFS—05 2
Table of contents
About your new thermostat
Home screen quick reference .....................5
Connecting to your Wi-Fi network ...............6
Registering your thermostat online ........... 11
Preset energy-saving schedules ............... 19
Operation
Setting the clock ........................................ 16
Setting the fan ........................................... 17
Selecting system mode ............................. 18
Adjusting program schedules .................... 20
Overriding schedules temporarily .............21
Overriding schedules permanently ........... 22
Unregistering thermostat........................... 23
Disconnecting Wi-Fi .................................. 24
Special features ........................................26
Setting functions and options ....................29
69-2736EFS—05 3
System Setup
System setup ............................................ 30
Appendices
Frequently asked questions ......................33
Troubleshooting ......................................... 36
Limited warranty ........................................ 43
Features of your Wi-Fi thermostat
With your new thermostat, you can:
Connect to the Internet to monitor and control your heating/cooling system
View and change your heating/cooling system settings
View and set temperature and schedules
Receive alerts via email and get automatic upgrades
our new thermostat provides:
Adaptive Intelligent Recovery (AIR) - the thermostat learns your system so it
can turn the heat or cool on early to reach your desired temperature at your desired time.
Compressor protection - the compressor waits a few minutes before restarting, to prevent equipment damage.
Heat/cool auto changeover - the thermostat automatically changes from heating to cooling to keep you comfortable.
69-2736EFS—05 4
Home screen quick reference
M31586
Once your Wi-Fi thermostat is installed, it will display the home screen. Portions of this display will change depending on how you are viewing it.
Set up messages
describe steps in the
Wi-Fi set up process
Set clock, day,
or schedule
Select fan
settings
HOLD
Select system
mode
Wi-Fi status
Temperature adjustment buttons
Permanent override button
Additional settings
The screen lights when you press any button. It stays lit for 8 seconds after you complete changes.
5 69-2736EFS—05
Connecting to your Wi-Fi network
Connect your wireless device to your home network. Any of these device types will work:
• Tablet (recommended)
• Laptop (recommended)
• Smartphone
If you get stuck... at any point in this procedure, restart the thermostat by removing
the thermostat from the wallplate, wait for 10 seconds, and snap it back onto the wallplate. Go to Step 1 in this procedure, starting on page 7.
69-2736EFS—05 6
Connecting to your Wi-Fi network
M33852
1 Connect to your thermostat.
1a Make sure the thermostat displays Wi-Fi SETUP. 1b On the wireless device (tablet, laptop,
smartphone), view the list of available Wi-Fi networks.
1c Connect to the network called
NewThermostat_123456 (the number will vary).
Note: If you are asked to specify a home, public, or
office network, select Home Network.
7 69-2736EFS—05
HOLD
Connecting to your Wi-Fi network
M31567
2 Join your home network.
2a Open your web browser to access the
Thermostat Wi-Fi Setup page. The browser should automatically direct you to the correct page; if it does not, go to http://192.168.1.1
2b Find the name of your home network on this
page and select it.
Note: Some routers have enhanced features such as
guest networks; use your home network.
2c Complete the instructions for joining your Wi-Fi
network and click on the Connect button. (Depending on your network setup, you may see an instruction such as Enter Password for your home network.)
Note: If you did not correctly connect to the thermostat, you may see your home
router page. If so, return to Step 1.
69-2736EFS—05 8
Connecting to your Wi-Fi network
Note: If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup
page:
• Try performing a network rescan by pressing the Rescan button. This is helpful in areas with a lot of networks.
• If you are connecting to a hidden network, then enter the network SSID in the textbox, select the encryption type from the drop down menu, and click on the Add button. This manually adds the network to the top of the list. Click on the new network in the list and enter the password if necessary. Click on Connect to join the network.
9 69-2736EFS—05
Connecting to your Wi-Fi network
3 Make sure your thermostat is connected.
While the connection is in process, your thermostat will flash Wait for up to 3 minutes. When the connection is complete, the display will show Wi-Fi Setup Connection Success. The Wi-Fi signal strength will appear in the top-right corner.
After about 60 seconds, the home screen will appear and Register at Total Connect will flash until registration is complete.
To register online for remote access to your thermostat continue on page 11.
Note: If the thermostat displays Connection Failure or continues to display Wi-Fi Setup,
confirm you correctly entered your home network password in step 2.
69-2736EFS—05 10
Registering your thermostat online
To view and set your Wi-Fi thermostat remotely, you must have a Total Connect Comfort account. Follow the instructions below.
1 Open the Total Connect Comfort web site.
Go to www.mytotalconnectcomfort.com
M31570
11 69-2736EFS—05
Registering your thermostat online
2 Login or create an account.
If you have an account, click Login – or – click Create An Account
2a Follow the instructions on the screen. 2b Check your email for a response from
My Total Connect Comfort. This may take several minutes.
Note: If you do not receive a response,
check your junk mailbox or use an alternate e-mail address.
2c Follow activation instructions in the
email.
2d Log in.
69-2736EFS—05 12
M31571
Loading...
+ 32 hidden pages