Ade RESON8 BROCHURE

The Reson8 bell box brings together aesthetics and functionality in a product designed to exceed

all the requirements of EN50131-4 – Security Grade 2, Environmental Class III. With fully

integrated sounder/strobe, self-activating cut-off timer and twin status indication, your choice of

audible/visible warning devices has just been made easier.

Dual Anti-Tamper Operation

Tamper circuitry will operate if either the cover is opened, or the bell box is removed from the wall.

Integral Battery Backup

With the integral 12V Ni-Cd battery, SAB facility is available as standard.

115dB Sounder Output

Once triggered, a piercing 115dB siren sounds, this together with the high-visibility xenon flashes, provides both an audible and
visual indication of a break-in.

Twin LED Status Indication

Two internal LEDs, one to identify that power is being supplied, and one to indicate tamper status. LED’s can also be set to
alternate for eye-catching status confirmation.

Sounder Timer Selection

Can be configured to reset itself after a preset time interval, to avoid noise pollution. An additional test mode allows short alarm
bursts (lasting 5 seconds) when testing the alarm operation during commissioning.

Reson8 Bell Box

Novar Intelligent Building Systems offers a uniquely comprehensive range of solutions for specifiers and installers of fire, security, building

management, datacoms and electrical installation products and is equipped to provide a single source solution for all your requirements

ADE

Novar ED&S Ltd The Arnold Centre Paycocke Road Basildon Essex SS14 3EA United Kingdom

Website www.ade.co.uk

Customer Service Tel [phone] Customer Service Fax [phone] Literature Helpline 0870 240 3387

Email [e-mail] or [e-mail] Technical Helpline 01268 563247

Registered office: Novar House 24 Queens Road Weybridge Surrey KT13 9UX Registered No.

189291

Literature Ref:

ADE-RES/04-04-01

Reson8 Bell Box Specification

POLYCARBONATE

CONSTRUCTION

LID AND WALL TAMPER

TWIN STATUS

INDICATORS

NI-CAD BACKUP

BATTERIES

SPECIFICATIONS RESON8 BELL BOX RESON8 DUMMY

Operating Voltage 10-15 V dc

Quiescent Current 50mA (Including battery charging)

Flash Current at 12V 120mA

Sounder Current at 12V 240mA

Operation Mode SAB (Self Active Bell)

Dual Fail-Safe Cut-Off Timer 5, 10, 20 minutes

5 seconds for test mode

Status Indication Power healthy, Tamper operation

Steady or alternating mode

Flash Rate 80-140 flashes per minute

Sounder Output (at 1m) 115dB

Lens Blue polycarbonate

Body White polycarbonate

Bell Box Dimensions H x W x D 291 x 268 x 69 mm

Carton Dimensions H x W x D 300 x 302 x 75 mm

Weight 0.9Kg 0.69Kg

Packed Weight 1.108Kg 0.978Kg

Part Number 8EP420 8EP425