Ade GEN4 BROCHURE

Gen4 Domestic Intruder Panels

RELIABLE AND FLEXIBLE INTRUDER PANELS

Domestic applications

Overview and features

A haven of peace and security – that’s what your home should
be, but when it really matters it’s best to be safe, not sorry. An

unprotected property is a vulnerable one at any time, day or night.

Every home needs the protection of a reliable alarm system, but

sometimes people are put off by the prospect of false alarms or

complicated setting procedures.

At Honeywell we understand these concerns. Honeywell Optima/

Accenta products have been installed in over 3 million homes in the

UK. Our latest range, with the same level of reliability and conformity

to CE specification directives, comes with a sleek new LCD display

keypad. Coupled with an intuitive menu interface, using and

programming the panel is even easier.

8 Zones

Each one is separately identified on the

keypad and provides ample security

detection for most domestic properties.

3 part set programs

Allows three programmed setting levels

dependent on the people in the property

or the level of protection required, eg.

night-time with upstairs detectors off and

perimeter detectors on.

Simple set readers for ease of
operation

Up to 4 stylish readers can be used to

SET/UNSET the system with the option of

using a proximity keyfob. Ideal for young,

elderly or infirm.

Personal attack facility

PA buttons may be used to activate the

system in an emergency. An additional PA

facility exists on the remote keypads.

Remote keypads for added flexibility

Up to four slimline keypads can operate

the system from any point in the property.

5 Digi-Outputs

For a wire-in digital communicator,

RedCare STU or Dialler. This allows the

system to communicate with an Alarm

Receiving Centre (not fitted on Optima

Compact Gen4).

New LCD Keypad

The LCD remote keypad operates with the

Accenta and Optima Gen4 intruder systems.

Up to four LED or LCD keypads can be

connected to the system. The large 2x16

characters with backlight display provide a

full status indication and the keypad plays

entry and exit tones.

Fire Zone

Zones 7 and 8 may be programmed as a

24 Hour Fire Zone operating all of the time

except during engineer mode.