Ade AG8, AG6 DATASHEET
AG6-AG8
DEPENDABLE, AUDIBLE AND VISUAL ALARM NOTIFICATION
ActiveGuard External Sounders
AG6-AG8
ActiveGuard External Sounder
High impact polycarbonate moulding
Horizontal or vertical mounting
One standard built-in wrap around
strobe lens
Double skin construction
NiCad back-up battery included
Multi colour options
Front and rear tamper
Up to two Piezo sounders
Diagnostic LEDs
Silent start up
Dual tones
Current flow monitor
SPECIFICATIONS
AG6 & AG8 EXTERNAL SOUNDERS
Dimensions 55 mm x 200 mm x 300 mm (h x w x d)
Weight 840g
Hold off Supply 13.65 VDC nominal, 12~14.5 VDC
Load Current AG6 35mA nom.: quiescent, 350mA nom.: combined sounder and strobe. 125mA nom.: strobe only
Sound Output Level AG6 110dB @ 1m nom. (supply & mounting dependent)
Battery 6.0V, 280 mAhr Nicad
Operating Temperature -20ºC to +40ºC, operating & storage
Humidity 5%~95% Relative humidity, non-condensing
Trigger Conditions Automatic reset occurs when trigger clears
Triggers Loss of hold off supply, S-Negative Trigger (-V applied), Trigger occurs when terminal
Tamper Detection Wall and cover retaining screw
LED 1 & 2 AG8 Twin alternating RED; also used for diagnostics
Cut off Timer 15 minutes nom. (sounder only)
Strobe Trigger -V applied
Strobe AG6 0.6 Joules per flash, Flash rate 2 flashes per second nom. @ 13.65 VDC strobe supply
Strobe Selectable AG8 Alternate 1 flash per second nom. @ 13.65 VDC, Dual 1 flash per 2 seconds nom. @ 13.65
AG8 35mA nom.: quiescent, 400mA nom.: combined sounder and strobe. 170mA nom.: strobe only
AG8 116dB @ 1m nom. (supply & mounting dependent)
voltage is less than 3.5V, Maximum load 1.0 mA
AG8 0.6 Joules per flash, 1 flash per second nom. @ 13.65 VDC strobe supply
VDC 2 strobes, Dual 1 flash per 1 second nom. @ 13.65 VDC 1 strobe
Colour Options AG6 WB white/blue, AG6-WR white/red.
AG8 WB white/blue, AG8-WR white/red.
Other colour combinations available upon request. Free screen printing
Honeywell Security
Honeywell International Inc.
Newhouse Industrial Estate
Motherwell
Lanarkshire ML1 5SB
Scotland
Tel +44 (0)1698 73 8200
www.honeywell.com/security/uk/intruder
HSCE-AG6-AG8-01-EN(02/06)SB-B
© 2006 Honeywell International Inc.
Loading...