Addonics Technologies NAS2XU2 User Manual

T E C H N O L O G I E S

User Guide

NAS 2.0 Adapter

(NAS2XU2)

www.addonics.com

v5.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/

For more detailed information on setting up the NAS2XU2 adapter, refer to the
User Manual located on the CD that came with the device.

The NAS 2.0 adapter is a flexible, economical and powerful unit for your Network.
Follow the instructions to help you connect, setup, and configure it.

Note: Any external USB storage device that you connect to the NAS 2.0 adapter
will initially be required to be formatted. This means, if you are connecting an external
USB drive with data on it, the hard drive will be formatted erasing all the information.

Network Environment

There are 3 different setup conditions you can choose:

A. Setup NAS2XU2 as a DHCP Client:
If the NAS2XU2 is connected to a LAN network with an active
DHCP server, it will obtain an IP address from DHCP server
automatically.

B. Setup NAS2XU2 as DHCP Server:

If your LAN network does not have an active DHCP server, the
NAS2XU2 will immediately act as DHCP server and assign itself an
IP address for installation.

C. Setup NAS2XU2 in Static IP environment:

You first need to configure the IP address for NAS2XU2 to operate
in the static IP environment. For Configuring details, please refer to
“LAN Config” setup page.

Illustration of a NAS2XU2 connected over the network

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/

I. NAS2XU2 Hardware Installation

5V Power Jack

Reset Button

RJ45 Socket

USB Printer

Access LED

System LED

Power LED

USB Mass
Storage Device

1. Connect external USB Storage device into USB port of the NAS
Adapter. Power on the USB Storage device.

2. Connect LAN cable via LAN switch and Router.

3. Connect 5V power adapter to power up the NAS adapter

NAS2XU2 connected directly to a computer’s NIC card

If you connect the NAS2XU2 to a computer directly, the will act as a DHCP server,
assigning itself an IP address automatically and will also assign an IP address to the
computer’s network card. This configuration will not enable you to see the drive on
the network.

NAS2XU2 connected to a Router or Switch

When the NAS2XU2 is connected to a LAN network with an active DHCP server, it
will obtain an IP address from DHCP server automatically. Or if your LAN network
does not have an active DHCP server, NAS2XU2 will immediately act as DHCP
server and assign itself an IP address for installation.

II. Search NAS2XU2 using SDisk Utility

1. Browse the CD enclosed in the product package. Copy and paste
“SDisk Utility” in to your computer then double click the icon to start
search.

Note: “SDisk utility” was written with JAVA script, please make sure your computer
has installed JAVA before, if not please install the JAVA JRE from the CD drive.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/