Addonics Technologies JCCHDIF64, JCCHDIS128, JCCHDIU128, JCCHDIS64, JCCHDIU64 User Manual

...
Addonics
T E C H N O L O G I E S
Jupiter Cipher Combo Hard Drive
For the following models: JCCHDIU64, JCCHDIF64, JCCHDIS64
User’s Guide
Version 1.0
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against har mful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try and correct the interference by one or more of the following suggestions.
Reorient or relocate the receiving antenna
Increase the distance between the equipment and the receiver
Connect the equipment to a different power outlet other than the
one where receiver is connected
Consult a certified television or radio technician
LIMITED WARRANTY
Addonics guarantees that every product is free from physical defects in material and workmanship dur ing the warranty period specified for each product when used within the limits set forth in the Specifications section in the user guide. Unauthorized tampering of the product or using it outside the scope of the product specifications will result in voiding the warranty. If the product proves defective during this warranty period, call Addonics Technical Support to obtain a Return Authorization n umber. BE SURE TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When returnin g a product, mark the Return Authorization number clearly on the outside of the package and in clude your original proof of purchase. Customers are responsible for paying the shipping and h andling of the products to Addonics warran ty service location. IN NO EVENT SHALL ADDONICS’ LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION. Addonics makes no warranty or representation, expressed, implied, or statuary, with respect to its products or the contents or use of the user guide and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Addonics reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity.
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 1
Contents
FCC Warning...................................................................................1
Limited Warranty............................................................................1
Contents............................................................................................ 2
Chapter 1 General Information .........................................................3
Features................................ ............................................3
Jupiter Cipher Combo Hard Drive models ........................ 4
Chapter 2 Jupiter Cipher Combo Hard Drive key..............................5
Chapter 3 Keeping track of the hard drive.........................................6
Chapter 4 Jumper Setting for Jupiter Cipher Combo Hard Dr ive....... 7
Chapter 5 Hardware Installation Guide........................................8-10
Jupiter Combo Hard Drive ................................ ........ 11-13
Optional Hardware ................................ ...................14-15
Chapter 6 Attaching USIB Interface Cable ..................................... 16
Chapter 7 USB2.0 USIB Interface Cable Driver Installation ......17-18
Serial ATA USIB Interface Cable Driver Installation ....19
Firewire USIB Interface Cable Driver Installation .........20
How to use Disk Management ...................................21-22
Technical Support & Contact Information................................ …23
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 2
Chapter 1 General Information
The Addonics Technologies Jupiter Cipher Combo Hard Drive is a portable
2.5” Hard Disk Drive kit. It consists of the Jupiter Cipher ExDrive and IDE drive cradle.
Features
Stylished and rugged black anodized aluminum housing
Compact size and light weight
Shock proof - up to 3 feet drop damage protection for the hard drive
Easy hard drive installation
Choice of standa rd or encryption drive enclosure
The most versatile hard drive kit in the market
Connect as an Exter nal Hard drive to any computer via USB2.0, CardBus,
Firewire/iLink and Serial ATA port (only one of these cables is included in
Turn an y 2.5” hard drives into external hard drive or removable hard drive
Use as a removable Hard Drive on Desktops PC
Plug & Play Operation under Windows 98SE, Me, 2000, XP and 2003
Server
Portable: Enclosure fits any Briefcase or Notebook PC Case.
Encryption
Hardware based 64-bit DES or 128-bit TDES full disk encryption
High performance - Data is encrypted and decrypted on the fly by a
certified cryptograph ic engine inside an ASIC without taking any CPU resources
Encryption / Decryption via a hardware key, just like using a r egular key to
open a door.
Simple to deploy with no training required, no software to install and no
password to remember
Platform independency - There is no software or driver to instal l to use
Addonics encryption products. As a result, i t can be deployed in any systems runnin g any OS. This is important in organization with multi platform computing and legacy systems.
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 3
Jupiter Cipher Combo Hard Drive
Item Number Product Description JCCHDIU64 Jupiter Cipher 64-bit Combo Hard Drive USB 2.0 for 2.5”
IDE hard drive
JCCHDIF64 Jupiter Cipher 64-bit Combo Hard Drive Firewire/iLink for
2.5” IDE hard drive
JCCHDIS64 Jupiter Cipher 64-bit Combo Hard Drive SATA for 2.5”
IDE hard drive
JCCHDIU128 Jupiter Cipher 128-bit Combo Hard Drive USB 2.0 for 2.5”
IDE hard drive
JCCHDIF128 Jupiter Cipher 128-bit Combo Hard Drive Firewire/iLink
for 2.5” IDE hard drive
JCCHDIS128 Jupiter Cipher 128-bit Combo Hard Drive SATA for 2.5”
IDE hard drive
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 4
bit
Chapter 2 Jupiter Cipher Combo Hard Drive key
Check to make sure you have the correct version of Jupiter Cipher Combo Hard Drive key. The key should match the label at the bottom of the drive enclosure.
Yellow label DES-64 stands for Jupiter Cipher Combo Hard Drive 64-bit key
Green label TDES-128 stands for Jupiter Cipher Combo Hard Drive 128­key
IMPORTANT
There is no back door for the Jupiter Cipher Combo Hard Drive encrypted hard drive if the key is lost or stolen.
To ensure that there is a spare key, your Jupiter Cipher Combo Hard Drive bundled kit comes with one pair of Jupiter Cipher Combo Hard Drive keys. These 2 keys have identical encryption code. One of these keys should be kept in a safe and secure location and can be sent back to Addonics for duplicating additional keys. If you are down to the last key, be sure to make a back up of all the data stored inside your encrypted hard drive prior to sending the last key to Addonics. Addonics is not responsible for key lost in the mail or retrieval of the data inside the encrypted hard drive.
Ø The CIPHER key MUST be inserted at the front of the drive enclosure
in order for the drive to be ACTIVATED.
Ø Once the drive is INITIALIZED using the Cipher Key that comes with
the kit, the drive can only be accessed by the original key.
Ø The 2 keys that come with each Jupiter Cipher Combo Hard Drive
bundled kit has their own unique encryption code. So the keys among different kits are not interchangeable.
If you have multiple sets of Jupiter Cipher Combo Hard Drive kits and would like all th e keys to have the same encryption code, you may make this request at the time of your order or mail the keys together with master key back to Addonics to recode them for you. Again be sure that you keep a spar e key with you. Make a back up of your data if you are mailing in your last key.
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 5
Chapter 3 Keeping track of the hard drive
If you are using the Jupiter Ciph er Combo Hard Drive enclosure to encrypt multiple har d drives, it is important to label your hard drive if you are taking the drive out of the enclosure. The hard drive with Jupiter Cipher Combo Hard Drive encryption will look like a brand new drive when attach directly to the IDE or SATA controller of a computer. There will be no partition or any hint t o indicate that the drive contains encrypted data. When the drive is partitioned, all the encrypted data will be lost.
The same holds true if a hard drive already has data on it is installed into the Jupiter Cipher Combo Hard Drive enclosure. The computer detects the hard drive as a brand new drive or a drive that is unallocated. Once you proceed to partition th e drive, the data that was on the hard drive will be erased and cannot be recovered.
A Jupiter Cipher Combo Hard Drive encrypted hard drive can be moved to another Jupiter Cipher Combo Hard Drive enclosure. But the same key used in encrypting the hard drive must be used in the new drive enclosure in order to access the drive.
If you are installing multiple Jupiter Cipher Combo Hard Drive kits into a large organization, it is important to keep track of the drive and the encryption key. Once it gets mixed up, there is no possible way to recover the data on the encrypted hard drive.
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 6
Chapter 4 Jumper Settings Inside the Jupiter Cipher Combo Hard Drive
Settings when Jupiter ExDrive is used as an External Enclosure
1. If the Jupiter ExDr ive will be used externally with the external AC adapter, the switch from the case must be switch to the right, labeled EXT to grab power from external power supply.
Application: Jupiter ExDrive can be set to receive power EXT and be used with all three types of USIB cables: USB2.0 USIB, Firewire USIB & SATA USIB
2. If the Jupiter ExDr ive will be used externally without the external AC adapter, the switch from the case must be switch to the left, labeled INT to grab power from system.
Application: Jupiter ExDrive can be set to receive power INT and be used with the following types of USIB cables: USB2.0 USIB & Firewire USIB
Note: We recommend setting the hard drive to MASTER mode/setting at all
times. (Default setting)
J4 Pin Definition for Master Setting
Hard Drive Brand J4 Jumper Setting
Hitachi NEC Fujitsu Toshiba Seagate
Pin 1~6 Open
J1 Pin Definition for USIB Interface
Hard Drive Setting J1 Jumper Setting
Master Pin 3 - Pin 5 Short
Addonics Technologies – Jupiter Cipher Combo Hard Drive User Guide v1.0 7
Loading...
+ 16 hidden pages