Addonics Technologies HDMU3 User Manual

T E C H N O L O G I E S

User Guide

Mini HDD Duplicator Station

(HDMU3)

www.addonics.com

Technical Support

If you need any assistance to get your unit functioning properly, please have your
product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST
Phone: [phone]
Email: http://www.addonics.com/support/query/

Unpacking and Overview

Back-up button

Progress LEDs

Disk 1

Drive Slot

Disk 1 LED

Disk 2
Drive Slot

Power LED

USB 3.0

Connector

Clone Button

Eject Buttons

Disk 2 LED

Power
Switch

Power Supply

Connector

Power Cable USB 3.0 Cable

Drive slots: Insert hard drive with SATA connector facing down and on the left side.
For 2.5” drives and smaller media installed in adapters, insert the drive thorough the
slot in the top of the unit. For 3.5” drives, insert the drive by pressing it through the door
on the top of the unit.

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: [phone] Email: www.addonics.com/support/query/