ADC LoopStar 745P, LoopStar 745 User Manual

LoopStar®745 and LoopStar®745P
Cost-Effective Ethernet Over DS3 Solutions With Carrier-Class Management Capabilities
ADC’s LoopStar745 and LoopStar745P provide the ideal solutions for delivering cost-effective, managed Ethernet over DS3 applications. These plug-and-play solutions deliver carrier-class performance allowing service providers to deliver low-cost, first-entry solutions for single customer scenarios.
With the LoopStar745 and LoopStar745P, a carrier is able to enter a single customer location and capture Ethernet service revenue with low, first-cost solutions that can be deployed today and pay for themselves within a few months, without having to invest in a costly build-out of the metro network.
SPEC SHEET SPEC SHEET
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Features
• ‘Plug-and-play’ platform and design
• LoopStar700 Traffic Management
• LoopStar700 In-band or out-of-band management
• Multi-level loopback testing
• Hands-off cable testing
• Circuit Emulation Services
Benefits
• Deliver a low, first-cost managed solution for Ethernet-to-DS3 applications
• ‘Plug-and-Play’ design makes the LoopStar745 and LoopStar745P easy to configure and provision
• Packet-based converged access switch allows full utilization of available bandwidth
• Hands-off cable testing for both the network and Ethernet connections
• Compact design makes them simple to install at the customer premise, either as wall-mounted or rack-mounted units
• Customer traffic classification, supporting up to 10 traffic rules per device, as well as VLAN management, traffic queuing, rate limiting and policing
• Extend IP management visibility all the way to the remote customer edge, eliminating truck rolls
• Provide automated verification of DS3, DS1 and 10/100 links
• Give carriers a fast, accurate way to pinpoint cabling problems, saving time and money
• Toll quality end-to-end delivery of circuit-based TDM services
09/06 • 102158AE
LoopStar
®
745 and LoopStar
®
745 P
LoopStar®745 and LoopStar®745P
Cost-Effective Ethernet Over DS3 Solutions With Carrier-Class Management Capabilities
2
www.adc.com • +1-952-938-8080 • 1-800-366-3891
The LoopStar745 and LoopStar745P deliver cost-effective Ethernet and/or T1 services over DS3.
Applications:
• Ethernet-enable an existing SONET ADM
• Back-to-back Ethernet over DS3 facilities
• High-speed Internet access
• Storage Networks
• Voice over IP (VoIP) or TDM voice interconnect
Deliver Management and Service Intelligence to the Remote Customer Edge
Using the LoopStar745 and LoopStar745P in conjunction with the LoopStar700 or LoopStar722 delivers the greatest value to the customer, as the intelligent services and capabilities of the LoopStar700 management suite can be fully leveraged at the customer demarcation point via a hub-and-spoke configuration. With a single LoopStar 722 or LoopStar750 serving as the hub, up to nine LoopStar745 and LoopStar745P units can be deployed across a metropolitan area, an office park or up the risers in a multi-tenant building to deliver managed Ethernet services.
In this configuration, each of the LoopStarunits can be managed in-band via a management VLAN or out-of-band via Ethernet. The management suite’s remote management capability allows carriers to extend IP management visibility all the way to the remote customer edge. From a single operator viewpoint, a full range of performance statistics, loopback diagnostics, cable integrity testing, and differentiated service definition allows the carrier to remotely manage and provision each individual LoopStar745 and LoopStar745P without ever having to touch the unit itself. Customers can be managed remotely and new services can be turned up quickly and easily without any truck rolls, providing huge operational savings.
The LoopStar745 and LoopStar745P also offer two hands-off cable tests—one for the DS3 uplink and one for the customer’s Ethernet connection using a built-in Time Domain Reflectometer (TDR).
Site 1
Back-to-Back
Central office or hub
T1s
LS
745
LS
750
Transport Network
DS3
Hub-and-Spoke
IP/MPLS
GigE
Class 5
PSTN
DS3
DS3
DS3
LS
745
Site 2
LS
745
Site 3
LS
745
Ethernet
T1
Ethernet
T1
Ethernet
Switch/router
Traditional PBX
Switch/router
Traditional PBX
Switch/router
Specifications
Interfaces
• 2 x 10/100 (RJ45)
• 1 x DS3 (BNC)
• 1 x T1 (RJ48c) (LoopStar 45+ only)
• 10/100 management port
Protocols
• 802.1p Prioritization
• 802.1Q VLAN tagging/switching/stacking
Management
• In-band management VLAN
• Web-based management GUI
• SNMP agent with standard MIBs
• FTP client download
• LoopStar700 intelligent management
Ethernet Services
• 802.1p prioritization
• 802.1Q VLAN tagging/switching/stacking
• Rate limiting: 128-500 kb/s increments
• CoS: WRR or strict priority based on VLAN, p-bits or ToS/DSCP
Maintenance
• DS1 loopback
• DS3 loopback and PM
• 10/100 loopbacks and PM
• Ethernet cable testing with TDR
Power
• AC Power: 100-240 V auto ranging, 47-63Hz
• DC Power: Dual DC Feeds
-48 VDC, nominal (-40 to -60VDC)or 24 VDC
Physical
• 1RU 1.75” x 17” x 7.25” (h x w x d)
• 0° to 50° C (operating)
• Rack or wall mounting options
Regulatory
• UL 60950, EN 60950
• CE Mark
• FCC Part 15, Class B
• EN55022 Class B
• NEBS Level 3 certified
• Full front access (ETSI form factor)
09/06 • 102158AE
LoopStar
®
745 and LoopStar
®
745 P
LoopStar®745 and LoopStar®745P
Cost-Effective Ethernet Over DS3 Solutions With Carrier-Class Management Capabilities
3
www.adc.com • +1-952-938-8080 • 1-800-366-3891
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. A n Equal Opportunity Employer
102158AE 09/06 Original © 2006 ADC Telecommunications, Inc. All Rights Reserved
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
SPEC SHEET
Ordering Information
Description Catalog Number
LPS-745 AC Package (2 10/100BT, DS3 uplink) *Includes: 1 AC power supply and AC power cord, 19” and 23” LPS-745-AC L1 rack mount brackets, license for basic software and documentation
LPS-745-48VDC Package (2 10/100BT, DS3 uplink) -1 RU Chassis *Includes: Internal dual feed - 48Vdc power supply, 19” and 23” LPS-745-48DC L1 rack mount brackets, license for basic software and documentation
LPS-745 24DC Package (2 10/100BT, DS3 uplink) *Includes: Internal dual feed - +24Vdc power supply, 19” and 23” LPS-745-24DC L1 rack mount brackets, license for basic software and documentation
LPS-745P AC Package, (1T1, 2 10/100BT, DS3 uplink) *Includes: 1AC power supply and AC power cord, 19” and 23” LPS-745P-AC L1 rack mount brackets, license for basic software and documentation
LPS-745 48P DC Package, (1T1, 2 10/100BT, DS3 uplink) - 1 RU Chassis *Includes: Internal dual feed -48dc power supply, 19” and 23” LPS-745P-48DC L1 rack mount brackets, license for basic software and documentation
LPS-745P 24VDC Package, (1T1, 2 10/100BT, DS3 uplink) *Includes: Internal dual feed +24Vdc power supply, 19” and 23” LPS-745P-24DC L1 rack mount brackets, license for basic software and documentation
Loading...