Hardware Installation – FlexWaveTM URH - Preliminary
FlexWave™ URH
Operation and Maintenance Manual - Preliminary
PRODUCT DESCRIPTION
This publication provides basic information about the FlexWave™ URH installation.
The FlexWave URH provides the same functionality as the ADC Wireless family of distributed
antenna systems (DAS). However, the URH platform implements three single band DAS
system capability into one single chassis. The system is comprised of a host and remote
chassis with a fiber optic interface. The host chassis is intended for central office equipment
enclosure/indoor use. This remote chassis is functional for indoor and outdoor installation.
The remote chassis provides the degree of protection specified by NEMA 6 and IP67 as
defined by IEC Publication 60529.
INSTALLATION OVERVIEW
REMOTE ENCLOSURE HOST ENCLOSURE
Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101
World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com
Mounting
The FlexWave™ URH host chassis is 19/23 inch equipment rack mountable requiring
3 RU spacing.
The Flexwave URH remote chassis has a mounting bracket provided with each unit.
The mounting bracket is banded to the pole with three 1.0” wide stainless steel bands. The
chassis is then hung from the bracket by means of protrusions and keyhole slots. Once the
chassis is in place, it is further secured to the mounting bracket with two 7/16” stainless
steel hex bolts.
Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101
World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com
SPECIFICATIONS
RF Specification
Supported Frequency Blocks 1-3 per Remote Unit; 1-8 per Host Unit
Bandwidth 1.5 to 35 MHz non-contiguous
Frequency Band Supported 800 Cellular, E-SMR 800/900, 1900 PCS,
1800/2100 AWS (First Release)
700, 1800 & 2500 MHz (Future Releases)
Digital Simulcast Up to 8:1 Single Host (can daisy chain Host for higher simulcast)
Diversity Receive Yes (Optional)
Propagation Delay
System Delay <12 microseconds
Delay Management Digital (Manual or Automatic)
Noise Figure
Noise Figure <5 dB
Input IP3 >-8 dBm
Optical Specifications
Optical Budget 10 dB (Standard); 26 dB (Optional)
Digital Transport Rate 3.072 Gbps
Output Power
Output Power per Band 38 dBm (6.5 Watts) Cell/SMR - October '07
43 dBm (20 Watts) PCS – November ‘07
43 dBm (20 Watts) AWS – December ‘07
43 dBm (20 Watts) Cell & SMR – Q2 ‘08
39 dBm (8 Watts) WiMAX – Q2 ‘08
General Specifications
Remote Unit Outside Ambient Temp Rating -40°C to +50°C
Storage Temperature -40°C to +70°C
Humidity 10% to 90% non-condensing
Lightning Protection 20kA IEC 1000-45 8/30 μs Waveform
Remote Unit
Enclosure IP-65
Mounting Wall, Pole
Dimensions 16.45” x 15.6” x 29.38”
Weight ≤200 Pounds (No component greater than 80 pounds)
Volume 3.66 cubic feet
Cooling Passive Convection
Optical Connectors Sealed ProAx
Impedance 50 Ohm
Host Unit
Mounting 19- and 23-inch rack
Rack Units 3 Rack Units
Weight <25 Pounds
Host Unit Power Requirements
Power Source 21 to 60 VDC floating
Remote Unit Power Requirements
Power Supply 100-240 VAC
Battery Backup UPS
Element Management
Embedded EMS Yes
SNMP Based Management Yes
Mailing Address: P.O. Box 1101, Minneapolis, Minnesota 55440-1101
World Headquarters: Minneapolis, Minnesota USA +1.952.938.8080 www.adc.com