ADC DSR0805A Users Manual

Element Management System

EMS

User Manual

ADCP-75-166

Part Number 1282804 Rev A Issue 1

Page ii Element Management System (EMS) 4.0 User Manual

About This Manual

This manual tells how to install and use the Digivance™ Element Management
System (EMS), version 4.0 for Software-Defined Radio (SDR) applications. EMS
is a software application that may be used on a PC or laptop computer. EMS can
also be accessed remotely using a direct data link to the computer on which EMS
is running.

Revision History

Issue Date Reason for Change

Issue 1 4/2004 Original.

Trademark Information

The following trademarks are referenced in this guide:

ADC is a registered trademark of ADC Telecommunications, Inc.

Digivance is a trademark of ADC Telecommunications, Inc.

Pentium is a registered trademark of Intel Corporation.

Java is a trademark of Sun Microsystems.

Windows is a registered trademark of MicroSoft Corporation.

Related ADC Publications

The following ADC publications contain information related to the Element
Management System. Copies of these documents can be ordered by calling ADC
Technical Assistance Center (1-800-366-3891 extension 73475, in U.S.A. and
Canada; 1-952-917-3475 outside U.S.A. and Canada).

• Digivance Long Range Coverage Solution 1900 MHz System
With Version 3.01 Element Management System
Installation and Operation Manual (ADCP-75-153)

• Digivance Long Range Coverage Solution 800 MHz System
With Version 3.01 Element Management System
Installation and Operation Manual (ADCP-75-156)

Element Management System (EMS) 4.0 User Manual Page iii

STANDARDS CERTIFICATION

FCC: This equipment complies with the applicable sections of Title 47 CFR Section 22.

IC: This equipment complies with the applicable sections of RSS-131.

Page iv Element Management System (EMS) 4.0 User Manual