ADC AD-25, AD-15 User Manual

AD-15/AD-25 Parts Manual
24 VAC Phase 5
1992 thru June 30, 2002
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: techsupport@amdry.com
022292 052997WM/tf
ADC Part No. 450107
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer.
The following “FOR YOUR SAFETY ” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
POUR VOTRE SÉCURITÉ
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil.
Important
For your convenience, log the following information:
DATE OF PURCHASE ____________________________ MODEL NO. __________________________________________
RESELLER’S NAME _______________________________________________________________________________________
Serial Number(s) ________________________________________________________________________________________
________________________________________________________________________________________
________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents
AD-15 Control Door Assembly Without Trim
For OPL (Non-Coin) Models Mfd. as of July 19, 1999 ....................................................................3
AD-25 Control Door Assembly Without Trim
For OPL (Non-Coin) Models Mfd. as of November 11, 1998 ..........................................................4
AD-15 High Security Control Door Assembly
For ALL Coin Models
For OPL Models Mfd. prior to July 19, 1999 ...................................................................................5
AD-25 High Security Control Door Assembly
For ALL Coin Models
For OPL Models Mfd. prior to November 11, 1998 .........................................................................6
Phase 5 Coin Microprocessor Control Panel Assembly ...........................................................................7
Phase 5 OPL Microprocessor Control Panel Assembly ...........................................................................8
Phase 5 Coin and OPL Microprocessor Control Box Assembly...............................................................9
AD-15/AD-25 Control Vault Assembly.................................................................................................10
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 3, 2000 .....................................................................................11
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 3, 2000 .................................................................................12
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. as of January 25, 2002 ........................................................................................13
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. prior to January 25, 2002 ....................................................................................14
Non-Microprocessor Control Box Assembly ........................................................................................15
Slide Meter Case Assembly
For Models Mfd. as of March 13, 2001 .........................................................................................16
Slide Meter Case Assembly
For Models Mfd. Between January 13, 1995 and March 13, 2001 .................................................17
Slide Meter Case Assembly
For Models Mfd. prior to January 13, 1995 ....................................................................................18
Main Door “Steel” Assembly ................................................................................................................19
Plastic Main Door Assembly .................................................................................................................20
Main Door Switch Assembly Cold Rolled Steel (CRS) Door .................................................................21
Main Door Switch Assembly
For Models with Plastic Doors........................................................................................................22
AD-15/AD-25 Cold Rolled Steel (CRS) Door Front Panel...................................................................23
AD-15/AD-25 Front Panel Assembly
For Models with Plastic Doors........................................................................................................24
AD-15 Basket (Tumbler)/Support Assembly .........................................................................................25
AD-25 Basket (Tumbler)/Support Assembly .........................................................................................26
Drop Lint Door Assembly Without Trim
For AD-15 OPL Models Mfd. as of July 24, 1999
For AD-25 OPL Models Mfd. as of November 11, 1998 ...............................................................27
Drop Lint Door Assembly With Trim
For ALL Coin Models For AD-15 OPL Models Mfd. prior to July 24, 1999
For AD-25 OPL Models Mfd. prior to November 11, 1998 .....................................................28, 29
AD-15/AD-25 Lint Trap Assembly .......................................................................................................30
AD-15/AD-25 Basket (Tumbler) Bearing Assembly ..............................................................................31
AD-15/AD-25 Idler Bearing Assembly ...........................................................................................32, 33
AD-15 Motor Mount Assembly ......................................................................................................34, 35
AD-25 Motor Mount Assembly ......................................................................................................36, 37
Sensor Bracket Assemblies ............................................................................................................38, 39
ADG-15 Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of May 20, 2000 ......................................................................................40, 41
ADG-25 Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of May 20, 2000 ......................................................................................42, 43
ADG-15/ADG-25 Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. prior to May 20, 2000 ..................................................................................44, 45
ADE-15/ADE-25 Electric Oven Assembly......................................................................................46, 47
ADG-15/ADG-25 DSI Johnson Control Module Assembly
For Models Mfd. as of May 20, 2000 ............................................................................................48
ADG-15/ADG-25 Sail Switch/Hi-Limit Assemblies...............................................................................49
Single-Phase (1ø) Motor, Electric Relay Panel Assembly .......................................................................50
3-Phase (3ø) Motor, Electric Relay Panel Assembly ..............................................................................51
Slide Meter Control Box Assembly
For Models Mfd. as of January 13, 1995 ........................................................................................52
Slide Meter Control Box Assembly
For Models Mfd. prior to January 13, 1995 ....................................................................................53
ADS-15/ADS-25 Steam Coil/Air-Operated Steam Damper Assembly ............................................54, 55
ADS-15/ADS-25 Steam Coil/Mechanical Steam Damper Assembly ...............................................56, 57
AD-15/AD-25 Outer Top/Back Guard Assembly .................................................................................58
ADG-15/ADG-25 Heat Reclaimer Assembly ........................................................................................59
Microprocessor Coin Acceptors Listing ................................................................................................60
Coin Meter Replacement Parts .............................................................................................................61
AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers...........................................................62
ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers ...........................................................63
ADE-15/ADE-25 Electric Oven Component Application Charts ...........................................................64
AD-15/AD-25 DSI Burner Assembly Specifications .............................................................................65
Additional Parts Available ..................................................................................................................66
AD-15 Control Door Assembly Without Trim
For OPL (Non-Coin) Models Mfd. as of July 19, 1999
3
Illus. No. Part No. Qty. Description
1 881053 1 ADC Logo ONLY (with double adhesive tape)
870011 1 Logo Double Tape Kit
2 883097* 1 Control Door
(includes illus. nos. 2 and 3) 3 117604 4 Neoprene Sponge Tape (sold by the foot) 4 150300 4 #10-16 x 1/2” Hex Washer TEK Screw 5 102603 1 Control Door Rod Support Catch 6 102601 1 Control Door Retainer Clip 7 102502 1 Control Door Support Rod 8 882541 2 Spring Turn Latch Assembly
* Specify color when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
4
AD-25 Control Door Assembly Without Trim
For OPL (Non-Coin) Models Mfd. as of November 11, 1998
Illus. No. Part No. Qty. Description
1 881053 1 ADC Logo ONLY (with double adhesive tape)
870011 1 Logo Double Tape Kit
2 882265* 1 Control Door
(includes illus. nos. 2 and 3) 3 117604 4 Neoprene Sponge Tape (sold by the foot) 4 150300 4 #10-16 x 1/2” Hex Washer TEK Screw 5 102603 1 Control Door Rod Support Catch 6 102601 1 Control Door Retainer Clip 7 102502 1 Control Door Support Rod 8 882541 2 Spring Turn Latch Assembly
* Specify color when ordering.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
AD-15 High Security Control Door Assembly
For ALL Coin Models For OPL Models Mfd. prior to July 19, 1999
5
Illus. No. Part No. Qty. Description
1 160015 1 High Security MK-100 Lock Assembly with Key (for coin models Only)
160104 1 MK-100 Key ONLY 160011 1 Special Dummy Lock ONLY (for non-coin models Only)
2 160016 1 Lock Cam ONLY 3 881053 1 ADC Logo with Tape
870011 1 Double Sided Tape Kit
4 800023* 1 AD-15 High Security Control Door Assembly with Gray Trim
(includes illus. nos. 4 through 7)
883265* 1 AD-15 High Security Control Door Assembly with Black Trim
(includes illus. nos. 4 through 7)
800140 1 AD-15 High Security Stainless Steel Control Door Assembly with Gray
Trim Less Lock (includes illus. nos. 4 through 7)
801197 1 AD-15 High Security Stainless Steel Control Door with Black Trim
(includes illus. nos. 4 through 7)
5 180200 1 AD-15 Top Gray Trim Strip with Lock Hole
180300 1 AD-15 Top Black Trim Strip with Lock Hole 6 117603 3 Suppressor Tape/Gasket (sold by the foot) 7 150201 5 #10-32 x 1/4” Phillips Round Head Machine Screw 8 150300 4 #10-16 x 1/2” Hex Washer TEK Screw 9 102603 1 Control Door Rod Support Catch 10 102601 1 Control Door Rod Retainer Clip 11 102502 1 Control Door Support Rod
* Specify color when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
6
AD-25 High Security Control Door Assembly
For ALL Coin Models
For OPL Models Mfd. prior to November 11, 1998
Illus. No. Part No. Qty. Description
1 160015 1 High Security MK-100 Lock Assembly with Key (for coin models Only)
160104 1 MK-100 Key ONLY 160017 1 Special Dummy Lock ONLY (for non-coin models Only)
2 160016 1 Lock Cam ONLY 3 881053 1 ADC Logo with Tape
870011 1 Double Sided Tape Kit
4 800022* 1 AD-25 High Security Control Door Assembly with Gray Trim
(includes illus. nos. 4 through 7)
800141 1 AD-25 High Security Stainless Steel Control Door Assembly with Gray
Trim Less Lock (includes illus. nos. 4 through 7)
883266* 1 AD-25 High Security Control Door Assembly with Black Trim
(includes illus. nos. 4 through 7)
882686 1 AD-25 High Security Stainless Steel Control Door Assembly with Black
Trim (includes illus. nos. 4 through 7)
5 180201 1 AD-25 Top Gray Trim Strip with Lock Hole
180301 1 AD-25 Top Black Trim Strip with Lock Hole
6 117603 3 Suppressor Tape/Gasket (sold by the foot)
For Models Mfd. as of February 6, 1995 7 150201 5 #10-32 x 1/4” Phillips Round Head Machine Screw 8 150300 4 #10-16 x 1/2” Hex Washer TEK Screw 9 102600 1 Control Door Rod Support Catch 10 102601 1 Control Door Rod Retainer Clip 11 102502 1 Control Door Support Rod
* Specify color when ordering.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No. Part No. Qty. Description
1 112526 1 Coin Keyboard Label Assembly 2 883537 1 Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, and 4 through 6) (for models mfd. as of June 25, 2002)
883538 1 Phase 5 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, and 4 through 6) (for models mfd. as of June 25, 2002)
883582 1 Phase 5 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, and 4 through 6) (for models mfd. prior to June 25, 2002)
883581 1 Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, and 4 through 6) (for models mfd. prior to June 25, 2002)
883539 1 Coin Control Panel ONL Y
(for models mfd. as of June 25, 2002)
883540 1 Coin Control Panel ONLY with Battery Bracket
(for models mfd. as of June 25, 2002)
883580 1 Coin Control Panel ONL Y
(for models mfd. prior to June 25, 2002)
883579 1 Coin Control Panel ONLY with Battery Bracket
(for models mfd. prior to June 25, 2002) 3 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw 4 137213 1 Phase 5 Coin Controller ONLY
824998 1 Phase 5 Battery Clip 5 153010 2 #6 Star Washer 6 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw 7 -------- 1 Microprocessor Coin Acceptor
(refer to Microprocessor Coin Acceptors Listing on page 60
8 -------- 1 Optic Switch ONLY
(refer to Microprocessor Coin Acceptors Listing on page 60
9 137023 1 Optic Switch Connector ONLY 10 137021 3 Microprocessor Socket ONLY
880772 1 Single Coin Optical Switch Harness
122800 1 Microprocessor (female) Pin Extraction Tool 11 136048 1 1/8-Amp (Slo-Blo) Fuse ONLY
7
)
)
IMPORTANT
: Check label on computer chip to verify correct part number for controller.
Telephone: (508) 678-9000 Fax: (508) 678-9447
8
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No. Part No. Qty. Description
1 112535 1 OPL English Keyboard Label Assembly
112276 1 OPL Stick-On Labels (English Only)...Not Illustrated 112275 1 3-Language OPL Stick-On Labels...Not Illustrated
(Spanish, Italian, and Hebrew)
112277 1 3-Language OPL Stick-On Labels...Not Illustrated
(English, Spanish, and Hebrew)
112278 1 5-Language OPL Stick-On Labels...Not Illustrated
(Italian, Dutch, French, German, and Chinese)
2 801255 1 Phase 5 Microprocessor Control Panel ONLY
801256 1 Phase 5 Microprocessor Control Panel ONLY with Battery Bracket 801206 1 Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete (includes illus. nos. 1 through 6)
801207 1 Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 6)
3 137222 1 Phase 5 OPL Non-Reversing Controller ONLY
137231 1 Phase 5 OPL Reversing Controller ONLY
824998 1 Phase 5 Battery Clip 4 153010 2 #6 Star Washer 5 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw 6 150300 1 #10-16 x 1/2” Hex Washer TEK Screw
(for models mfd. as of March 1, 1994)
882541 1 Spring Turn Latch (2-piece)...Not Illustrated
(for models mfd. prior to March 1, 1994)
7 136048 1 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Phase 5 Coin and OPL Microprocessor Control Box Assembly
9
Illus. No. Part No. Qty. Description
1 -------- 1 24 VAC Control Voltage Transformer
(refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam
Dryers
(refer to AD-15/AD-25 Transformer Usage Listing for Electric Dryers on page 63
2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 3 120715 1 30-Position Terminal Block 4 150002 2 #6-32 x 1” Phillips Round Head Screw 5 151000 2 #6-32 Pal Nut 6 136057 * 1/2-Amp (Slo-Blo) Fuse 7 150301 * #8-18 x 7/16” Self Drilling Screw 8 136008 * Fuse Block/Strip ONLY 9 122641 1 15-Pin Microprocessor Connector 10 122706 * Sockets ONLY 11 131931 1 Steam Valve Relay - 24 VAC
(for mechanical steam damper models Only) 12 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 13 137035 1 Motor Capacitor
(for mechanical steam damper models Only) 14 323583 1 Capacitor Bracket
(for mechanical steam damper models Only) 15 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 16 132002 1 Transformer
(for mechanical steam damper models 208 volts and higher) 17 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
on page 62
)
)
* As required.
Telephone: (508) 678-9000 Fax: (508) 678-9447
10
AD-15/AD-25 Control Vault Assembly
Illus. No. Part No. Qty. Description
1 802112 1 Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6) 802117 1 Microprocessor Coin Vault ONLY 802110 1 Non-Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6) 802115 1 Non-Microprocessor Coin Vault ONLY
2 160028 1 Cam for 1/4 Turn Lock ONLY 3 875061 1 1/4 Turn Lock with Key and Cam
160105* 1 1/4 Turn Mer-Pel Key ONLY
4 802020 1 1/4 Turn Coin Box Assembly
(includes illus. nos. 2 through 5) 802019 1 1/4 Turn Coin Box ONLY without Faceplate 125915 1 High Security (Greenwald) Coin Box ONLY with Key
5 802018 1 1/4 Turn Coin Box Faceplate ONLY 6 152014 4 1/4-20 Free Spin Wash Nut 7 102502 1 Control Door Support Rod 8 102601 1 Control Door Rod Retainer Clip 9 102603 1 Control Door Rod Catch
* Specify key number when ordering.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Dual Timer “Tap Touch” Controls
For Models Mfd. as of November 3, 2000
11
Illus. No. Part No. Qty. Description
1 124030 1 15 Minute Timer - 24 VAC 2 124025 1 60 Minute Timer - 24 VAC 3 824175 1 Red Pilot Light - 24 VAC 4 122301 1 “Tap Touch” Switch 5 131932 3 Relay SPST 24v 6 120730 1 30-Position Terminal Block 7 151000 6 #6-32 Pal Nut 8 882903 1 Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
850392 - Dual Timer Panel ONLY 9 153010 2 #6 Star Washer 10 152000 3 #6-32 Hex Nut 11 150207 2 #10-24 x 1/2” Phillips Pan Head Machine Screw 12 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw 13 112563 1 Dual Timer Panel Overlay 14 124104 1 Pure Touch Knob with Red Pointer 15 124105 1 Pure Touch Knob with Blue Pointer
Telephone: (508) 678-9000 Fax: (508) 678-9447
12
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 3, 2000
Illus. No. Part No. Qty. Description
1 123005 1 Red Indicator Light - 24 VAC 2 122400 1 Rocker Heat Selector Switch 3 824015 1 Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 21)
800051 1 Dual Timer Control Panel ONLY 4 131917 1 Push-To-Start Relay - 24 VAC 5 150207 2 #10-24 x 1/2” Round Head Machine Screw 6 154001 2 #10-24 Speed Nut 7 152000 2 #6-32 Hex Nut 8 153010 2 #6 Star Washer 9 120713 1 18-Position Terminal Block 10 150002 2 #6-32 x 1” Phillips Round Head Machine Screw 11 150110 4 #8-32 x 1/4” Phillips Machine Screw 12 150001 2 #6-32 x 1/2” Phillips Round Head Machine Screw 13 131931 1 Dual Timer Relay - 24 VAC 14 151000 2 #6-32 Pal Nut 15 112050 1 Dual Timer Label ONLY 16 150415 1 #10-16 x 1/2” Phillips Round Head Crimptite Screw
(for models mfd. as of March 1, 1994)
882541 1 Spring Turn Latch (2-piece)...Not Illustrated
(for models mfd. prior to March 1, 1994) 17 124103 2 Arrow Timer Knob 18 124025 1 60 Minute Timer - 24 VAC 19 124030 1 15 Minute Timer - 24 VAC 20 122602 1 9-Pin Connector ONLY 21 122700 8 Pin Terminal ONLY
-- 122801 1 Pin/Socket Extraction Tool
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. as of January 25, 2002
13
Illus. No. Part No. Qty. Description
1 123005 1 Red Indicator Light - 24 VAC 2 122400 1 Rocker Heat Selector Switch 3 824172 1 Coin Meter Control Panel Assembly Less Coin Meter
(includes illus. nos. 2 through 5, 7, and 8)
824109 1 Coin Meter Control Panel ONLY
4 131932 1 24 VAC Relay
154001 2 #10-24 Speed Nut (used on P/N 131932, 24 VAC Relay) 5 123225 1 Green Push-To-Start Button 6 125601 1 25¢ Coin Meter - 24 VAC (specify timing) 7 153010 2 #6 Star Washer 8 152016 2 Hex Nut 9 120712 1 12-Position Terminal Block 10 150300 1 #10-16 x 1/2” Hex Washer TEK Screw 11 122602 1 9-Pin Connector 12 122700 7 Pin Terminal ONLY
--- 122801 1 Pin Extraction Tool
NOTE: For Coin Meter Replacement Parts refer to page 61.
Telephone: (508) 678-9000 Fax: (508) 678-9447
14
Non-Microprocessor Coin Meter Control Panel Assembly
For Models Mfd. prior to January 25, 2002
Illus. No. Part No. Qty. Description
1 123005 1 Red Indicator Light - 24 VAC 2 122400 1 Rocker Heat Selector Switch 3 824020 1 Coin Meter Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 6 and 8 through 12)
800054 1 Coin Meter Control Panel ONLY 4 131917 1 Push-To-Start Relay - 24 VAC 5 150207 2 #10-24 x 1/2” Round Head Machine Screw 6 154001 2 #10-24 Speed Nut 7* 125601 1 25¢ Coin Meter - 24 VAC (specify timing) 8 150303 2 #4 x 3/4” Pan Head “A” Screw 9 120712 1 12-Position Terminal Block 10 150309 1 #10-16 x 1/2” Hex Head TEK Crimptite Screw
(for models mfd. as of March 3, 1994)
882541 1 Spring Turn Latch (2-piece)...Not Illustrated
(for models mfd. as of March 3, 1994) 11 122602 1 9-Pin Connector ONLY 12 122700 9 Pin Terminal ONLY
--- 122801 1 Pin/Socket Extraction Tool
* Consult factory for coin meters not listed.
NOTE: For Coin Meter Replacement Parts refer to page 61.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Non-Microprocessor Control Box Assembly
15
Illus. No. Part No. Qty. Description
1 122603 1 9-Pin Socket Connector 2 122701 9 Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool 3 315010 1 9-Pin Connector Bracket 4 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 5 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 6 --------- 1 24 VAC Control Voltage Transformer
(refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers on page 62) (refer to ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers on page 63)
7 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 8 131931 1 Steam Valve Relay (for mechanical steam damper models Only) - 24 VAC 9 136008 * Fuse Block/Strip ONLY 10** 136057 * 1/2-Amp (Slo-Blo) Fuse ONLY 11 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw 12 150002 2 #6-32 x 1” Phillips Round Head Machine Screw 13 120715 1 30-Position Terminal Block 14 151000 2 #6-32 Pal Nut 15 132002 1 Transformer (for mechanical steam damper 208 VAC and higher) 16 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 17 137035 1 Motor Capacitor (for mechanical steam damper models Only) 18 323583 1 Capacitor Bracket (for mechanical steam damper models Only) 19 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
* As required. ** Check fuse on dryer for verification.
Telephone: (508) 678-9000 Fax: (508) 678-9447
16
Slide Meter Case Assembly
For Models Mfd. as of March 13, 2001
Illus. No. Part No. Qty. Description
1* 160199 1 Key ONLY for Slide Meter Lock 2 160099 1 Lock/Key/Cam and Hardware 3 125908 1 Slide Meter Accumulator - 24 VAC 4 122643 9 Mate-N-Lock Pin ONLY 5 122642 1 9-Position Mini-Universal Socket 6 152014 4 1/4-20 Free Spin Wash Nut 7 122631 2 6-Position Connector (mate-n-lock) 8 131917 1 Push-To Start Relay - 24 VAC 9 883034 1 White Slide Meter Case
883035 1 Coral Blue Slide Meter Case
883036 1 Ivory Slide Meter Case 10 122603 1 9-Position Connector (mate-n-lock) 11 122701 21 Socket Terminal ONLY 12 883165 1 Slide Meter Case ONLY with Door Less Lock 13 154203 6 1/4” Drive Rivet 14 801700 1 Slide Meter Extension ONLY with Mirror
(includes illus. nos. 14 and 15)
15 315404 1 Stainless Steel Mirror ONLY 16 -------- 1 Typical Slide Meter Coin Chute (not available from ADC) 17 123005 1 Red Indicator Light - 24 VAC 18 122400 1 Rocker Heat Selector Switch 19 -------- 1 Typical Slide Meter Coin Box (not available from ADC) 20 801701 1 Slide Meter Case Mounting Plate 21 102502 1 Control Door Support Rod 22 102601 1 Control Door Rod Retainer Clip 23 102603 1 Control Door Support Rod Catch 24 883044 1 Slide Meter Extension 25 883038 1 White Slide Meter Timer Door
883039 1 Coral Blue Slide Meter Timer Door
883040 1 Ivory Slide Meter Timer Door
* Specify key number when ordering.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Slide Meter Case Assembly
For Models Mfd. Between January 13, 1995 and March 13, 2001
17
Illus. No. Part No. Qty. Description
1* 160199 1 Key ONLY for Slide Meter Lock 2 160099 1 Lock/Key/Cam and Hardware 3 125908 1 Slide Meter Accumulator - 24 VAC 4 122643 9 Mate-N-Lock Pin ONLY 5 122642 1 9-Position Mini-Universal Socket 6 152014 4 1/4-20 Free Spin Wash Nut 7 122631 2 6-Position Connector (mate-n-lock) 8 131917 1 Push-To Start Relay - 24 VAC 9 881100 1 Slide Meter Modular J-Box Assembly 10 122603 1 9-Position Connector (mate-n-lock) 11 122701 21 Socket Terminal ONLY 12 883165 1 Slide Meter Case ONLY with Door Less Lock 13 154203 6 1/4” Drive Rivet 14 801700 1 Slide Meter Extension ONLY with Mirror
(includes illus. nos. 14 and 15)
15 315404 1 Stainless Steel Mirror ONLY 16 -------- 1 Typical Slide Meter Coin Chute (not available from ADC) 17 123005 1 Red Indicator Light - 24 VAC 18 122400 1 Rocker Heat Selector Switch 19 -------- 1 Typical Slide Meter Coin Box (not available from ADC) 20 801701 1 Slide Meter Case Mounting Plate 21 102502 1 Control Door Support Rod 22 102601 1 Control Door Rod Retaine r Clip 23 102603 1 Control Door Support Rod Catch 24 883044 1 Slide Meter Extension
* Specify key number when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
18
Slide Meter Case Assembly
For Models Mfd. prior to January 13, 1995
Illus. No. Part No. Qty. Description
1* 160199 1 Key ONLY for Slide Meter Lock 2 160099 1 Lock/Key/Cam and Hardware 3 125908 1 Slide Meter Accumulator - 24 VAC 4 152014 4 1/4-20 Free Spin Wash Nut 5 883165 1 Slide Meter Case ONLY with Door Less Lock 6 154203 6 1/4” Drive Rivet 7 801700 1 Slide Meter Extension ONLY with Mirror
(includes illus. nos. 14 and 15)
8 315404 1 Stainless Steel Mirror ONLY 9 -------- 1 Typical Slide Meter Coin Chute (not available from ADC) 10 -------- 1 Typical Slide Meter Coin Box (not available from ADC) 11 801701 1 Slide Meter Case Mounting Plate 12 102502 1 Control Door Support Rod 13 102601 1 Control Door Rod Retainer Clip 14 102600 1 Control Door Support Rod Catch 15 122400 1 Rocker Heat Selector Switch 16 123005 1 Red Indicator Light - 24 VAC 17 131917 1 Push-To-Start Relay - 24 VAC
* Specify key number when ordering.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Main Door “Steel” Assembly
19
Illus. No. Part No. Qty. Description
1 881150 1 Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
2 102354 1 Door Gasket
170731 1 Black Glass Adhesive (10.3 oz. cartridge)
3 881152 1 Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4) 4 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew 5 153031 1 1/4” Nylon Washer 6 881151 1 Black Bottom Hinge Block Assembly
(includes illus. nos. 5 through 7) 7 150445 2 1/4-20 x 3/4” Black Cap Head Setscrew
150443 2 1/4-20 x 3/4” Stainless Steel Cap Head Setscrew 8 150683 3 1/4-20 x 5/8” Black Carriage Bolt 9 152014 3 1/4-20 Free Spin Wash Nut 10 151010 1 #10-32 Black Hex Acorn Nut 11 150120 1 Door Latch Screw 12 150683 3 1/4-20 x 5/8” Black Carriage Bolt 13 152014 3 1/4-20 Free Spin Wash Nut 14 881210 1 Black Main Door Handle ONLY 15 102211 1 Door Glass without Holes
102218 1 20-7/16” Door Glass with 4 Holes for Mechanical Fasteners
170731 1 Black Glass Adhesive (10.3 oz. cartridge) 16 151013 4 #10-32 Black Nylon Acorn Nut
Telephone: (508) 678-9000 Fax: (508) 678-9447
20
Plastic Main Door Assembly
Illus. No. Part No. Qty. Description
1 881422 1 Black Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9) 2 800448 1 12-1/2” Stainless Steel Main Door Hinge Assembly 3 150410 4 #10-24 x 3/8” Phillips Pan Head Taptite Screw 4 152014 4 1/4-20 Free Spin Wash Nut 5 102349 1 Main Door Gasket 6 102212 1 20-7/16” Door Glass with (4) Holes
170730 1 Main Door Gasket/Glass Adhesive (10.3 oz. cartridge) 7 150448 4 1/2” Stainless Steel Flat Head Allen Screw 8 170319 4 Door Glass (nylon) Spacer 9 150431 1 Main Door Latch Screw
(#10 x 7/16” dome hex head screw)
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly Cold Rolled Steel (CRS) Door
21
Illus. No. Part No. Qty. Description
1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw 2 152013 2 #6-32 Hex Nut 3 153010 2 #6 Star Washer 4 137005 1 Single-Pole Door Switch 5 122636 2 Flag Terminal 6 881211 1 Main Door Switch Housing 7 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
Telephone: (508) 678-9000 Fax: (508) 678-9447
22
Main Door Switch Assembly
For Models with Plastic Doors
Illus. No. Part No. Qty. Description
1 152013 2 #6-32 Hex Nut 2 153008 2 #6 Lock Washer 3 137005 1 Single-Pole Door Switch 4 121028 2 Insulated Female Terminal 5 154281 2 3/8” Standard Nylon Spacers 6 800448 1 12-1/2” Stainless Steel Main Door Hinge Assembly
(includes illus. nos. 6 and 7) 7 153565 2 #6-32 x 1” Self-Clinching Stud 8 313218 1 Main Door Switch Housing 9 150201 2 #10-32 x 1/4” Phillips Pan Head Screw 10 121405 1 Rubber Grommet
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
AD-15/AD-25 Cold Rolled Steel (CRS) Door Front Panel
23
Illus. No. Part No. Qty. Description
1 881268* 1 AD-15 Cold Rolled Steel (CRS) Front Panel Assembly
(includes illus. nos. 1 through 3)
881287 1 AD-15 Cold Rolled Steel (CRS) Stainless Steel Front Panel Assembly
(includes illus. nos. 1 through 3)
881793* 1 AD-15 Cold Rolled Steel (CRS) Left Hand Front Panel Assembly
(includes illus. nos. 1 through 3)
881270* 1 AD-25 Cold Rolled Steel (CRS) Front Panel Assembly
(includes illus. nos. 1 through 3)
881288 1 AD-25 Cold Rolled Steel (CRS) Stainless Steel Front Panel Assembly
(includes illus. nos. 1 through 3)
881996* 1 AD-25 Cold Rolled Steel (CRS) Left Hand Front Panel Assembly
(includes illus. nos. 1 through 3) 2 154215 2 5/32” x 1/4” Rivet 3 881987 1 Friction Door Latch Kit
(includes illus. nos. 2 and 3) 4 150300 1 #10-16 x 1/2” Hex Washer TEK Screw 5 150309 8 #10-16 x 1/2” Hex Head TEK Crimptite Screw 6 881152 1 Black Top Hinge Block Assembly
881208 1 Stainless Steel Top Hinge Block Assembly
7 150445 4 1/4-20 x 7/8” Black Cap Head Setscrew
150443 4 1/4-20 x 7/8” Stainless Steel Cap Head Setscrew
8 881151 1 Black Bottom Hinge Block Assembly
881209 1 Stainless Steel Bottom Hinge Assembly
* Specify color when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
24
AD-15/AD-25 Front Panel Assembly
For Models with Plastic Doors
Illus. No. Part No. Qty. Description
1 875300* 1 AD-15 Right Hand Insulated Front Panel Assembly Complete (latch-type)
(includes illus. nos. 1 through 3 and 6)
875301* 1 AD-25 Right Hand Insulated Front Panel Assembly Complete (latch-type)
(includes illus. nos. 1 through 3 and 6)
875311 1 AD-15 Stainless Steel Right Hand Insulated Front Panel Assembly
Complete (latch-type) (includes illus. nos. 1 through 3 and 6)
875312 1 AD-25 Stainless Steel Right Hand Insulated Front Panel Assembly
Complete (latch-type)
(includes illus. nos. 1 through 3 and 6) 2 154215 2 5/32” x 1/4” Rivet 3 881987 1 Friction Door Latch Kit
(includes illus. nos. 2 and 3) 4 150300 1 #10-16 x 1/2” Hex Washer TEK Screw 5 150309 8 #10-16 x 1/2” Hex Head TEK Crimptite Screw 6 121405 1 Rubber Grommet
* Specify color when ordering.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
AD-15 Basket (Tumbler)/Support Assembly
25
Illus. No. Part No. Qty. Description
1* 800700 1 AD-15 Galvanized Basket (tumbler) ONLY (without felt collar)
800850 1 AD-15 Stainless Steel Basket (tumbler) ONLY (without felt collar) 800812 1 AD-15 Galvanized Basket (tumbler) and Support Assembly
(includes illus. nos. 1 through 10)
800860 1 AD-15 Stainless Steel Basket (tumbler) and Support Assembly
(includes illus. nos. 1 through 10) 2 150313 24 #10-16 x 1/2” TORX + BTN, Type 1 3 301307 4 AD-15 Galvanized Basket (tumbler) Rib ONLY
301407 4 AD-15 Stainless Steel Basket (tumbler) Rib ONLY 4** 150518 1 5/16-18 x 3/8” Socket Button Head Screw 5 100900 4 5/16-18 x 17-1/2” Tie Rod 6 153001 4 5/16” Flat Washer 7 800610 1 AD-15 Basket (tumbler) Support ONLY 8 152004 4 5/16-18 Hex Nut 9 153002 4 5/16” Lock Washer 10 153001 4 5/16” Flat Washer 11 116002 1 Felt Collar ONLY
-- 401010 1 #847 Adhesive for Felt Collar (5.0 oz. tube)
* Felt collar is not included and must be ordered separately. ** For models mfd. prior to January 21, 2002 ONLY.
Telephone: (508) 678-9000 Fax: (508) 678-9447
26
AD-25 Basket (Tumbler)/Support Assembly
Illus. No. Part No. Qty. Description
1* 800702 1 AD-25 Galvanized Basket (tumbler) ONLY (without felt collar)
800731 1 AD-25 Stainless Steel Basket (tumbler) ONLY (without felt collar) 817085 1 AD-25 Galvanized Basket (tumbler) and Support Assembly
(includes illus. nos. 1 through 10)
800752 1 AD-25 Stainless Steel Basket (tumbler) and Support Assembly
(includes illus. nos. 1 through 10) 2 150313 24 #10-16 x 1/2” TORX + BTN, Type 1 3 301305 4 AD-25 Galvanized Basket (tumbler) Rib ONLY
301420 4 AD-25 Stainless Steel Basket (tumbler) Rib ONLY 4** 150518 1 5/16-18 x 3/8” Socket Button Head Screw 5 882049 4 5/16” to 3/8” Tie Rod Kit
(includes illus. nos. 5, 6, and 8 through 10) 6 153004 4 5/16” to 3/8” Flat Washer 7 800611 1 AD-25 Basket (tumbler) Support ONLY 8 152005 4 3/8-18 Hex Nut 9 153005 4 3/8” Lock Washer 10 153004 4 3/8” Flat Washer 11 116002 1 Felt Collar ONLY
-- 401010 1 #847 Adhesive for Felt Collar (5.0 oz. tube)
* Felt collar is not included and must be ordered separately. ** For models mfd. prior to January 21, 2002 ONLY.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Drop Lint Door Assembly Without Trim
For AD-15 OPL Models Mfd. as of July 24, 1999 For AD-25 OPL Models Mfd. as of November 11, 1998
27
Illus. No. Part No. Qty. Description
1 800150 1 Knob Latch Kit Assembly
(includes illus. nos. 1 and 2) 160003 1 Dummy Lock ONLY 160104 1 MK-100 Key ONLY
2 160008 1 Lock Cam
160009 1 Knob Latch Adjustable Cam ONLY 150425 1 #12-24 x 3/8” Round Head Machine Screw ONLY
(screw for knob latch adjustable cam)
3 157000 1 Drop Lint Door Spring 4 883143* 1 AD-15 Insulated Lint Door Assembly
(includes illus. nos. 4 and 5) 882264* 1 AD-25 Insulated Lint Door Assembly
(includes illus. nos. 4 and 5) 883141 1 AD-15 Stainless Steel Lint Door Assembly
(includes illus. nos. 4 and 5) 883142 1 AD-25 Stainless Steel Lint Door Assembly
(includes illus. nos. 4 and 5)
5 117604 7 Neoprene Sponge Tape (sold by the foot) 6 150419 2 #6 x 1/2” Tamperproof TEK Screw 7 108120 1 Chain for Drop Lint Door (10-1/2” length)
150418 1 Tamperproof Screw Hand Driver
* Specify color when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
28
Drop Lint Door Assembly With Trim
For ALL Coin Models
For AD-15 OPL Models Mfd. prior to July 24, 1999
For AD-25 OPL Models Mfd. prior to November 11, 1998
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Drop Lint Door Assembly With Trim
For ALL Coin Models For AD-15 OPL Models Mfd. prior to July 24, 1999 For AD-25 OPL Models Mfd. prior to November 11, 1998
Illus. No. Part No. Qty. Description
1 160001 1 Lock Assembly with Key (for coin models Only)
160103 1 Key ONLY 800150 1 Knob Latch Kit Assembly (for non-coin models Only) 160003 1 Dummy Lock ONLY (for non-coin models Only) 160104 1 MK-100 Key ONLY (master key)
2 160008 1 Lock Cam for Lock and Dummy Lock
160009 1 Knob Latch Adjustable Cam (for non-coin models Only) 150425 1 #12-24 x 3/8” Right Hand Machine Screw (for knob latch adjustable cam)
3 157000 1 Drop Lint Door Spring 4 883267* 1 AD-15 Drop Lint Door Assembly with Black Trim
(includes illus. nos. 4 through 8) 800215* 1 AD-15 Drop Lint Door Assembly with Gray Trim
(includes illus. nos. 4 through 8) 800239 1 AD-15 Stainless Steel Drop Lint Door Assembly with Gray Trim 883268* 1 AD-25 Drop Lint Door Assembly with Black Trim
(includes illus. nos. 4 through 8) 800219* 1 AD-25 Drop Lint Door Assembly with Gray Trim
(includes illus. nos. 4 through 8) 800243 1 AD-25 Stainless Steel Drop Lint Door Assembly with Gray Trim
5 150201 10 #10-32 x 1/4” Phillips Pan Head Machine Screw 6 117604 7 Noise Suppressor Tape (sold by the foot) 7 117603 3 Suppressor Tape/Gasket (sold by the foot)
For Models Mfd. as of February 8, 1995 102307 3 Trim Bumper Gasket (sold by the foot)
For Models Mfd. prior to February 8, 1995
8 180210 2 AD-15 Gray Trim/Kick Plate (31-1/8” long)
180310 2 AD-15 Black Trim/Kick Plate (31-1/8” long) 180211 2 AD-25 Gray Trim/Kick Plate (34-1/8” long) 180311 2 AD-25 Black Trim/Kick Plate (34-1/8” long)
9 150419 2 #6 x 1/2” Tamperproof TEK Screw
150418 1 Tamperproof Screw Hand Driver
10 108120 1 Chain for Drop Lint Door
29
* Specify color when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
30
AD-15/AD-25 Lint Trap Assembly
Illus. No. Part No. Qty. Description
1 800425* 1 AD-15/AD-25 Choked Lint Trap Assembly Complete
(includes illus. nos. 1, 3, 4, and 5) 800426* 1 AD-15/AD-25 Choked Lint Trap ONLY 800400** 1 AD-15/AD-25 Lint Trap Assembly Complete
(includes illus. nos. 1, 3, 4, and 5) 800403** 1 AD-15/AD-25 Lint Trap ONLY
2 154200 6 5/32” Pop Rivet 3 150300 3 #10-16 x 1/2” Hex Washer TEK Screw 4 304100 1 Lint Screen Holder ONLY 5 800500 2 AD-15/AD-25 Lint Screen ONLY 6 150419 2 #6 x 1/2” Tamperproof TEK Screw 7 108120 1 Chain for Drop Lint Door
- 150418 1 Tamperproof Screw Hand Driver
* For gas models ONL Y. ** For electric models and steam models ONLY.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
AD-15/AD-25 Basket (Tumbler) Bearing Assembly
31
Illus. No. Part No. Qty. Description
1 153002 3 5/16” Lock Washer 2 880213 1 1-1/4” Flange Bearing ONLY 3 153002 3 5/16” Lock Washer 4 152004 3 5/16-18 Hex Nut 5 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt 6 153002 4 5/16” Lock Washer 7 153004 4 3/8” Flat Washer 8 801100 1 1” Bearing Box Assembly Complete
(includes illus. nos. 8 through 14)
801105 1 Bearing Box ONLY 9 150610 2 5/16-18 x 1-1/2” Allen Setscrew 10 152004 2 5/16-18 Hex Nut 11 150501 3 5/16-18 x 3/4” Hex Head Machine Bolt 12 880201 1 1” Flange Bearing ONLY 13 153002 3 5/16” Lock Washer 14 152004 3 5/16-18 Hex Nut 15 101100 1 18” Pulley ONLY 16 154301 2 5/16-18 x 5/16” Setscrew 17 100713 1 1/4” x 1/4” x 7/8” Key 18 100108 1 5L-680 V-Belt (basket [tumbler] to idler)
For AD-15
100107 1 5L-670 V-Belt (basket [tumbler] to idler)
For AD-25
Telephone: (508) 678-9000 Fax: (508) 678-9447
32
AD-15/AD-25 Idler Bearing Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
AD-15/AD-25 Idler Bearing Assembly
Illus. No. Part No. Qty. Description
1 100108 1 5L-680 V-Belt (idler to basket [tumbler])
For AD-15
100107 1 5L-670 V-Belt (basket [tumbler] to idler)
For AD-25 2 101129 1 9” x 2-1/2” Compound Pulley 3 100110 1 4L-500 V-Belt (idler to motor)
For AD-15
For AD-25 60 Hz ONLY
100103 1 4L-510 V-Belt (idler to motor)
For AD-25 50 Hz ONLY 4 154301 2 5/16-18 x 1” Allen Setscrew 5 100705 1 3/16” x 3/16” x 1-3/8” Key 6 882576 1 Idler Bearing Assembly Complete
(includes illus. nos. 5 through 12) 7 150617 2 3/8-16 x 1” Hex Head Machine Bolt 8 153005 2 3/8” Lock Washer 9 153004 2 3/8” Flat Washer 10 801009 1 Idler Square Washer 11 152004 1 5/16-18 Hex Nut 12 150509 1 5/16-18 x 3” Hex Head Machine Bolt
33
Telephone: (508) 678-9000 Fax: (508) 678-9447
34
AD-15 Motor Mount Assembly
Illus. No. Part No. Qty. Description
1 100110 1 4L-500 V-Belt (to idler assembly) 2 100701 1 3/16” x 3/16” x 1” Key
(for use on 3ø models Only)
3 101104 1 1/2” x 2” Motor Pulley
(for use on 1ø - 60 Hz motors Only)
101131 1 1/2” x 2-1/4” Motor Pulley
(for use on 1ø - 50 Hz motors Only)
101132 1 5/8” x 2” Motor Pulley
(for use on 3ø - 60 Hz motors Only)
101133 1 5/8” x 2-1/4” Motor Pulley
(for use on 3ø - 50 Hz motors Only) 4 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt 5 153002 4 5/16” Lock Washer 6 153001 4 5/16” Flat Washer 7 181049 1 1/2 HP 100-230v 1ø 50/60 Hz Plug-Type Motor
(for models mfd. as of February 4, 2002)
883572 1 1/2 HP 240v 1ø 50 Hz Plug-Type Motor
(for models mfd. prior to February 4, 2002)
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
AD-15 Motor Mount Assembly (continued)
Illus. No. Part No. Qty. Description
8 122701 8 Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool 9 137030 1 8-Pin Housing Connector 10 152004 4 5/16-18 Hex Nut 11 153002 4 5/16” Lock Washer 12 153001 4 5/16” Flat Washer 13 117604 4 1/8” x 3/8” Sponge Tape (sold by the foot) 14 154000 4 5/16-18 Tinnerman Nut 15 800908 1 1/2 HP Motor Mount ONLY (56Z frame)
803930* 1 1/2 HP 115-230v 1ø 60 Hz Motor Mount Assembly Complete with Plug
Motor (includes illus. nos. 2 through 7 and 13 through 20)
880819 1 1/2 HP 240v 1ø 50 Hz Motor Mount Assembly Complete with Plug Motor
(includes illus. nos. 2 through 7 and 13 through 20)
803801* 1 1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22)
803800* 1 1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22) 16 153050 2 1/2” S.A.E. Flat Washer 17 100604 1 12-1/2” Impellor with 1/2” Bore 18 100702 1 1/8” x 1/8” x 1-1/2” Key 19 153050 2 1/2” S.A.E. Flat Washer 20 152006 2 1/2-20 Left Hand Jam Nut 21 120200 1 3/8” 90° Connector 22 100007* 1 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)
35
* Specify voltage when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
36
AD-25 Motor Mount Assembly
Illus. No. Part No. Qty. Description
1 100110 1 4L-500 V-Belt (to idler assembly) 60 Hz
100103 1 4L-510 V-Belt (to idler assembly) 50 Hz
2 100701 1 3/16” x 3/16” x 1” Key
(for use on 3ø models Only)
3 101102 1 1/2” x 1-3/4” Motor Pulley
(for use on 1ø - 60 Hz motors Only)
101103 1 5/8” x 1-3/4” Motor Pulley
(for use on 3ø - 60 Hz motors Only)
101104 1 1/2” x 2” Motor Pulley
(for use on 1ø - 50 Hz motors Only)
101132 1 5/8” x 2” Motor Pulley
(for use on 3ø - 50 Hz motors Only) 4 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt 5 153002 4 5/16” Lock Washer 6 153001 4 5/16” Flat Washer 7 181049 1 1/2 HP 100-230v 1ø 50/60 Hz Plug-Type Motor
(for ALL 50/60 Hz models mfd. as of February 4, 2002)
883573 1 1/2 HP 240v 1ø 50 Hz Plug-Type Motor - Includes 2” Motor Pulley
(for models mfd. prior to February 4, 2002)
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
AD-25 Motor Mount Assembly (continued)
Illus. No. Part No. Qty. Description
8 122701 8 Socket Terminal ONLY
122801 1 Pin/Socket Extraction Tool 9 137030 1 8-Pin Housing Connector 10 152004 4 5/16-18 Hex Nut 11 153002 4 5/16” Lock Washer 12 153001 4 5/16” Flat Washer 13 117604 4 1/8” x 3/8” Sponge Tape (sold by the foot) 14 154000 4 5/16-18 Tinnerman Nut 15 850017 1 1/2 HP Motor Mount ONLY (56Z frame)
803935* 1 1/2 HP 115-230v 1ø 60 Hz Motor Mount Assembly Complete with Plug
Motor (includes illus. nos. 2 through 7 and 13 through 20)
880820 1 1/2 HP 240v 1ø 50 Hz Motor Mount Assembly Complete with Plug Motor
(includes illus. nos. 2 through 7 and 13 through 20)
803807* 1 1/2 HP 208/230/380/460v 3ø 60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22)
803806* 1 1/2 HP 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor Mount Assembly Complete
(includes illus. nos. 2 through 6 and 13 through 22) 16 153050 2 1/2” S.A.E. Flat Washer 17 100604 1 12-1/2” Impellor with 1/2” Bore 18 100702 1 1/8” x 1/8” x 1-1/2” Key 19 153050 2 1/2” S.A.E. Flat Washer 20 152006 2 1/2-20 Left Hand Jam Nut 21 120200 1 3/8” 90° Connector 22 100007* 1 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled
(T.E.F.C.) Motor (56Z frame)
37
* Specify voltage when ordering.
Telephone: (508) 678-9000 Fax: (508) 678-9447
38
Sensor Bracket Assemblies
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assemblies
Illus. No. Part No. Qty. Description
1 880251 1 1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8) 2 130103 1 225° Large Automatic Reset Thermostat 3 153010 2 #6 Star Washer 4 152000 2 #6-32 Hex Nut 5 121028 2 Insulated Terminal ONLY 6 122701 4 Socket Terminal ONLY 7 122605 1 4-Pin Socket Connector ONLY 8 154007 2 1/4” Tinnerman Push On Fastener 9 150005 2 #6-32 x 1/4” Round Head Machine Screw 10 801425 1 Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
305007 1 Universal Sensor Bracket ONLY 11 122604 1 4-Pin Connector ONLY 12 122700 4 Pin Terminal ONLY 13 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw 14 150005 5 #6-32 x 1/4” Slotted Round Head Machine Screw 15 130111 1 130° Large Thermostat 16 130100 1 150° Large Thermostat 17 130103 1 225° Large Automatic Reset Thermostat 18 130101 1 180° Large Thermostat 19 153010 5 #6 Star Washer 20 152000 5 #6-32 Hex Nut 21 840065 1 Sensor Jumper ONLY 22 121028 4 Insulated Terminal ONLY 23 122701 4 Socket Terminal ONLY 24 122605 1 4-Pin Socket Connector ONLY
840062 1 Sensor Bracket Harness Assembly
(includes illus. nos. 22 through 24)
25 801418 1 Noncomputer Sensor Bracket Assembly Complete - Includes Thermostats
(includes illus. nos. 14 through 25)
305007 1 Universal Sensor Bracket ONLY 26 122604 1 4-Pin Connector ONLY 27 122700 4 Pin Terminal ONLY
122801 1 Pin/Socket Extraction Tool 28 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
39
Telephone: (508) 678-9000 Fax: (508) 678-9447
40
ADG-15 Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of May 20, 2000
Illus. No. Part No. Qty. Description
1 141104 2 Small Burner Tube 2 150108 2 #8-32 x 1/2” Pan Head Machine Screw 3 151001 2 #8-32 Pal Nut 4 140811 2 #41 Natural Gas Burner Orifice for Non-Heat Reclaimer Models ONLY
140848 2 #54 Liquid Propane (L.P.) Burner Orifice for Non-Heat Reclaimer
Models ONLY 140809 2 #43 Natural Gas Burner Orifice for Heat Reclaimer Models ONLY 140848 2 #54 Liquid Propane (L.P.) Burner Orifice for Heat Reclaimer
Models ONLY
5 141230 1 1/2” 2-Port Manifold 6 150309 5 #10-16 x 1/2” Hex Head TEK Crimptite Screw 7 318716 1 Gas Valve Bracket
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
ADG-15 Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of May 20, 2000
Illus. No. Part No. Qty. Description
8 128927 1 1/2” 24 VAC Redundant Gas Valve (natural gas)
(refer to DSI L.P. Conversion Kit Listing on page 65)
880960 1 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve 9 142707 1 1/2” x 1-1/2” B.I. Nipple 10 142500 1 1/2 x 90° Elbow 11 142754 2 1/2” x 8” B.I. Nipple 12 142600 1 1/2” Black Union 13 883145 1 Natural Gas Burner Box Assembly Complete Less Orifice
For Non-Heat Reclaimer Models ONLY
883146 1 Liquid Propane (L.P.) Burner Box Assembly Complete Less Orifice
For Non-Heat Reclaimer Models ONLY 883147 1 Heat Reclaimer Natural Gas Burner Box Assembly Complete Less Orifice 883148 1 Heat Reclaimer Liquid Propane (L.P.) Burner Box Assembly Complete
Less Orifice 850850 1 Non-Heat Reclaimer Burner Box ONLY 809750 1 Heat Reclaimer Burner Box ONLY
14 809308 1 Ignitor/Flame-Probe Assembly with Leads
880330 1 High Voltage (HV) Wire and Connector Assembly
15 150300 6 #10-16 x 1/2” Hex Washer TEK Screw 16 318700 1 Pipe Bracket 17 154004 1 Twin Speed Nut 18 802799 1 Sail Switch Box Cover and Bracket ONLY 19 122200 1 Sail Switch 20 150303 2 #4 x 3/4” Pan Head Machine Screw 21 105500 1 Sail Switch Actuator Rod 22 319202 1 Sail Switch Damper (flat) 23 154002 1 1/8” Push On Fastener
802800 1 Sail Switch Box with Cover 802801 1 Sail Switch Assembly Complete
(includes illus. nos. 15 and 17 through 23)
24 319704 1 Hi-Limit Mounting Bracket 25 150001 2 #6-32 x 1/2” Phillips Round Head Machine Screw 26 130201 1 330º Manual Reset Hi-Limit 27 151000 2 #6-32 Pal Nut
41
Telephone: (508) 678-9000 Fax: (508) 678-9447
42
ADG-25 Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. as of May 20, 2000
Illus. No. Part No. Qty. Description
1 141104 2 Small Burner Tube 2 150108 2 #8-32 x 1/2” Pan Head Machine Screw 3 151001 2 #8-32 Pal Nut 4 140818 2 #31 Natural Gas Burner Orifice for Non-Heat Reclaimer Models ONLY
140802 2 #50 Liquid Propane (L.P.) Burner Orifice for Non-Heat Reclaimer
Models ONLY 140852 2 #34 Natural Gas Burner Orifice for Heat Reclaimer Models ONLY 140801 2 #51 Liquid Propane (L.P.) Burner Orifice for Heat Reclaimer
Models ONLY
5 141230 1 1/2” 2-Port Manifold
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
ADG-25 Direct Spark Ignition (DSI) Burner Assembly (continued)
For Models Mfd. as of May 20, 2000
Illus. No. Part No. Qty. Description
6 150309 5 #10-16 x 1/2” Hex Head TEK Crimptite Screw 7 318716 1 Gas Valve Bracket 8 128927 1 1/2” 24 VAC Redundant Gas Valve (natural gas)
(refer to DSI L.P. Conversion Kit Listing on page 65)
880960 1 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve 9 142707 1 1/2” x 1-1/2” B.I. Nipple 10 142506 1 1/2” x 1/2” Street Elbow 11 142600 1 1/2” Black Union 12 142800 1 1/2” x 18” Pipe 13 883151 1 Natural Gas Burner Assembly Complete Less Orifice for Non-Heat
Reclaimer Models ONLY
883152 1 Liquid Propane (L.P.) Burner Assembly Complete Less Orifice for
Non-Heat Reclaimer Models ONLY
883153 1 Natural Gas Burner Assembly Complete Less Orifice for Heat Reclaimer
Models ONLY
883154 1 Liquid Propane (L.P.) Burner Assembly Complete Less Orifice for Heat
Reclaimer Models ONLY 850850 1 Non-Heat Reclaimer Burner Box ONLY 809750 1 Heat Reclaimer Burner Box ONLY
14 809307 1 Ignitor/Flame-Probe Assembly
880330 1 High Voltage (HV) Wire and Connector Assembly
15 150300 6 #10-16 x 1/2” Hex Washer TEK Screw 16 318700 1 Pipe Bracket 17 154004 1 Twin Speed Nut 18 802799 1 Sail Switch Box Cover and Bracket ONLY
802801 1 Sail Switch Assembly Complete
19 122200 1 Sail Switch 20 150303 2 #4 x 3/4” Pan Head Machine Screw 21 105500 1 Sail Switch Actuator Rod 22 319202 1 Sail Switch Damper (flat) 23 154002 1 1/8” Push On Fastener 24 319704 1 Hi-Limit Mounting Bracket 25 150001 2 #6-32 x 1/2” Phillips Round Head Machine Screw 26 130201 1 330º Manual Reset Hi-Limit 27 151000 2 #6-32 Pal Nut 28 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw (for 50 Hz models Only) 29 318202 1 Rear Burner Air Deflector (for 50 Hz models Only)
43
Telephone: (508) 678-9000 Fax: (508) 678-9447
44
ADG-15/ADG-25 Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. prior to May 20, 2000
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
ADG-15/ADG-25 Direct Spark Ignition (DSI) Burner Assembly
For Models Mfd. prior to May 20, 2000
Illus. No. Part No. Qty. Description
1 318030 1 Direct Spark Ignition (DSI) Burner Shield 2 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 3 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 4 880134 1 Ignitor/Flame-Probe Kit Assembly
(includes illus. nos. 4 and 5)
5 880330 1 High Voltage (HV) Wire Connector Assembly 6 150103 2 #8-32 x 1/2” Pan Head Machine Screw 7 153000 2 #8 Steel Burr 8 151001 2 #8-32 Pal Nut 9 141104 2 Small Tube Burner ONLY 10 -------- 2 Burner Orifice
(refer to DSI Burner Orifice Listing on page 65)
11 141230 1 1/2” Direct Spark Ignition (DSI) Manifold (2-port) 12 318700 1 Pipe Bracket (bent) 13 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 14 128927 1 1/2” 24 VAC Redundant Gas Valve (natural gas)
880960 1 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve
15 --------* Tail Piece Collar ONLY 16 --------* 1 1/2” Union Tail Piece ONLY 17 881367 1 Union Shut Off Body Complete with Tail Piece and Collar
(includes illus. nos. 15 through 17)
18 142800 1 1/2” x 18” Pipe 19 150309 4 #10-16 x 1/2” Hex Head TEK Crimptite Screw 20 318700 2 Pipe Bracket (bent) 21 850850 1 Non-Heat Reclaimer Burner Box ONLY
850861 1 Heat Reclaimer Burner Box ONLY
-------- 1 Burner Assembly Complete Less Orifices
(refer to DSI Burner Assembly Listing on page 65)
22 882627 1 ADC Direct Spark Ignition (DSI) Module ONLY 23 150299 4 #10 x 1” Hex Washer TEK Screw
-- -------- 1 Conversion Kit
(refer to DSI L.P. Conversion Kit Listing on page 65)
45
* Not available individually...must be purchased as an assembly.
Telephone: (508) 678-9000 Fax: (508) 678-9447
46
ADE-15/ADE-25 Electric Oven Assembly
ELECTRIC OVEN (REAR VIEW)
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
ADE-15/ADE-25 Electric Oven Assembly
Illus. No. Part No. Qty. Description
1 803003* 1 Small Electric Oven Box ONLY
--------* 1 Electric Oven Assembly Complete
2 --------* - Electric Element 3 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 4 802800 1 Sail Switch Box with Bracket and Cover ONLY
802801 1 Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
5 154004 1 Twin Speed Nut 6 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 7 802799 1 Sail Switch Box Cover ONLY 8 122200 1 Sail Switch ONLY 9 150303 2 #4 x 3/4” Pan Head “A” Machine Screw 10 105500 1 Sail Switch Actuator Rod 11 319202 1 Sail Switch Damper (flat) 12 154002 1 1/8” Push On Fastener 13 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 14 803100 1 Electric Oven Front Cover ONLY 15 320611 1 Large Relay Box Cover ONLY 16 150207 2 #10-24 x 1/2” Phillips Round Head Machine Screw 17 130400 1 290º Hi-Limit 18 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 19 154001 2 #10-24 Speed Nut 20 121010 1 L-70 Ground Lug 21 152014 3 1/4-20 Free Spin Wash Nut 22 --------* 1 Oven Relay 23 --------* 1 Oven Relay Replacement Coil 24 120081 - Internal Ceramic Insulator (2 per element) 25 120080 - External Ceramic Insulator (2 per element) 26 152008 - #10-32 Hex Nut (4 per element) 27 121011* - Bus Bar 28 --------* - Terminal Lug 29 153009 - #10 Star Washer (2 per element) 30 321300 1 Small Electric Oven Right Side Cover ONLY 31 150402 2 #10-24 x 5/8” Slotted Truss Head Machine Screw
47
* Refer to ADE-15/ADE-25 Electric Oven Component Application Charts on page 64.
Telephone: (508) 678-9000 Fax: (508) 678-9447
48
ADG-15/ADG-25 DSI Johnson Control Module Assembly
For Models Mfd. as of May 20, 2000
Illus. No. Part No. Qty. Description
1 152013 2 #6-32 Hex Nut 2 801048 1 ADC Direct Spark Ignition (DSI) Johnson Control Module 3 150301 2 #8-18 x 7/16” Phillips Round Head TEK Screw 4 801711 1 Direct Spark Ignition (DSI) Module Mounting Plate
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
ADG-15/ADG-25 Sail Switch/Hi-Limit Assemblies
49
Illus. No. Part No. Qty. Description
1 154004 1 Twin Speed Nut 2 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 3 802799 1 Sail Switch Box Cover and Bracket ONLY 4 150303 2 #4 x 3/4” Pan Head “A” Machine Screw 5 122200 1 Sail Switch ONLY 6 105500 1 Sail Switch Actuator Rod 7 319202 1 Sail Switch Damper (flat) 8 154002 1 1/8” Push On Fastener 9 802800 1 Sail Switch Box with Cover and Bracket ONLY
802801 1 Sail Switch Assembly Complete
(includes illus. nos. 1 through 8)
10 142800 1 1/2” x 18” Pipe 11 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 12 319704 1 Hi-Limit Mounting Bracket ONLY 13 151000 2 #6-32 Pal Nut 14 151001 2 #6-32 x 1/2” Round Head Machine Screw 15 130201 1 330º Hi-Limit ONLY Manual Reset
Telephone: (508) 678-9000 Fax: (508) 678-9447
50
Single-Phase (1ø) Motor, Electric Relay Panel Assembly
Illus. No. Part No. Qty. Description
1 132475 1 2-Pole Contactor - 24 VAC 2 150299 2 #10 x 1” Hex Washer TEK Screw 3 824828 1 RC Network with Connectors
(for microprocessor models Only)
- 322809 1 Back Electrical Box Cover...Not Illustrated
- 150301 4 #8-18 x 7/16” Phillips Round Head TEK Screw...Not Illustrated
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
3-Phase (3ø) Motor, Electric Relay Panel Assembly
51
Illus. No. Part No. Qty. Description
1 322812 1 Back Electrical Box Component Mounting Plate 2 132447 1 Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC 3 137015 1 RC Filter
(for microprocessor models Only)
4 150103 2 #8-32 x 3/4” Phillips Round Head Machine Screw 5 151001 2 #8-32 Pal Nut 6 153002 1 5/16” Lock Washer 7 152004 1 5/16-18 Hex Nut 8 120701 1 4-Position Terminal Block 9 150008 2 #6-32 x 1-1/4” Slotted Round Head Machine Screw 10 151000 2 #6-32 Pal Nut 11 121300 3 Open/Closed Bushing 12 --------- 1 Step Down Transformer
(refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam
Dryers on page 62)
(refer to ADE-15/ADE-25 Transformer Usage Listing for Electric
Dryers on page 63)
13 150300 2 #10-16 x 1/2” Hex Washer TEK Screw
-- 322809 1 Back Electrical Box Cover...Not Illustrated
-- 150301 4 #8-18 x 7/16” Phillips Round Head TEK Screw...Not Illustrated
Telephone: (508) 678-9000 Fax: (508) 678-9447
52
Slide Meter Control Box Assembly
For Models Mfd. as of January 13, 1995
Illus. No. Part No. Qty. Description
1 132475 1 2-Pole Contactor - 24 VAC 2 150299 2 #10 x 1” Hex Washer TEK Screw 3 150300 2 #10-16 x 1/2” Hex Head Washer TEK Screw 4 -------- - 24 VAC Transformer
(refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers on page 62) (refer to ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers on page 63)
5 136057 * 1/2-Amp (Slo-Blo) Fuse ONLY 6 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw 7 136008 * Fuse Block/Strip ONLY 8 150002 2 #6-32 x 1” Round Head Machine Screw 9 120715 1 30-Position Terminal Block ONLY 10 151000 2 #6-32 Pal Nut 11 153002 1 5/16-18 Lock Washer 12 152004 1 5/16-18 Hex Nut 13 305520 1 Rear Contactor Plate ONLY
-- 322809 1 Back Electrical Box Cover...Not Illustrated
-- 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated
* As required.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Slide Meter Control Box Assembly
For Models Mfd. prior to January 13, 1995
53
Illus. No. Part No. Qty. Description
1 132475 1 2-Pole Contactor - 24 VAC 2 150299 2 #10 x 1” Hex Washer TEK Screw 3 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 4 -------- 1 24 VAC Transformer ONLY
(refer to AD-15/AD-25 Transformer Usage Listing for Gas/Steam
Dryers on page 62)
(refer to ADE-15/ADE-25 Transformer Usage Listing for Electric
Dryers on page 63)
5 136057 * 1/2-Amp (Slo-Blo) Fuse ONLY 6 150301 * #8-18 x 7/16” Phillips Pan Head TEK Screw 7 136008 * Fuse Block/Strip ONLY 8 150002 2 #6-32 x 1” Round Head Machine Screw 9 120715 1 30-Position Terminal Block ONLY 10 151000 2 #6-32 Pal Nut
-- 322809 1 Back Electrical Box Cover...Not Illustrated
-- 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated
* As required.
Telephone: (508) 678-9000 Fax: (508) 678-9447
54
ADS-15/ADS-25 Steam Coil/Air-Operated Steam Damper Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
ADS-15/ADS-25 Steam Coil/Air-Operated Steam Damper Assembly
Illus. No. Part No. Qty. Description
1 165013 1 Steam Coil Assembly 2 153002 6 5/16” Lock Washer 3 152004 6 5/16-18 Hex Nut 4 152002 4 1/4-20 Hex Nut 5 153007 4 1/4” Lock Washer 6 820321 2 Steam Damper Hinge Assembly 7 880834 1 Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
8 153007 4 1/4” Lock Washer 9 152002 4 1/4-20 Hex Nut 10 115995 48 Steam Damper Gasket (sold by the inch) 11 102350 1 Steam Damper Foam (68-1/2” length) 12 151006 1 5/16-24 Stainless Steel Acorn Nut 13 152051 1 5/16-24 Right Hand Jam Nut 14 100495 1 11/16” Diameter x 3” Stroke Piston 15 323365 2 Left and Right Piston Support 16 152002 2 1/4-20 Hex Nut 17 153007 2 1/4” Lock Washer 18 100472 1 1/4” Poly x 1/8” M.P.T. Connector 19 143110 1 1/4” Poly-Flo Tubing 20 100472 1 1/4” Poly x 1/8” M.P.T. Connector 21 100496 1 1/8” Needle Valve 22 143238 1 1/8” Brass Close Nipple 23 100498 1 3-Way Micro Valve - 24 VAC 24 150002 2 #6-32 x 1” Machine Bolt 25 153010 2 #6 Star Washer 26 152000 2 #6-32 Hex Nut 27 330987 1 Micro Valve Support 28 152002 2 1/4-20 Hex Nut 29 153007 2 1/4” Lock Washer 30 100520 1 1/8” N.P.T. Silencer (muffler) #N-25
55
Telephone: (508) 678-9000 Fax: (508) 678-9447
56
ADS-15/ADS-25 Steam Coil/Mechanical Steam Damper Assembly
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
ADS-15/ADS-25 Steam Coil/Mechanical Steam Damper Assembly
Illus. No. Part No. Qty. Description
1 165013 1 Steam Coil Assembly ONLY 2 153002 6 5/16” Lock Washer 3 152004 6 5/16-18 Hex Nut 4 152002 4 1/4-20 Hex Nut 5 153007 4 1/4” Lock Washer 6 820321 2 Steam Damper Hinge Assembly 7 880835 1 Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
8 115995 48 Steam Damper Gasket (sold by the inch) 9 102350 1 68-1/2” Long Steam Damper Foam 10 309300 1 Rod Bracket 11 154300 1 1/2” x 3/32” Cotter Pin 12 153022 1 #10 Steel Burr 13 104052 1 Mechanical Steam Damper Actuator Rod 14 150110 2 #8-32 x 1/4” Phillips Head Machine Screw 15 153012 2 #8 Star Washer 16 312315 1 Mechanical Steam Damper Motor Mount 17 153022 1 #10 Steel Burr 18 154300 1 1/2” x 3/32” Cotter Pin 19 850268 1 Mechanical Steam Damper Arm 20 150110 2 #8-32 x 1/4” Phillips Head Machine Screw 21 153012 2 #8 Star Washer 22 312315 1 Mechanical Steam Damper Motor Mount 23 104054 1 Mechanical Steam Damper Motor 24 100511 1 Mechanical Steam Damper Switch Plate 25 122120 1 Mechanical Steam Damper Switch 26 150026 2 #4-40 x 5/8” Phillips Pan Head Machine Screw 27 122120 1 Mechanical Steam Damper Switch 28 150026 2 #4-40 x 5/8” Phillips Pan Head Machine Screw 29 153012 2 #8 Star Washer 30 150102 2 #8-32 x 3/8” Pan Head Machine Screw 31 --------* 1 Mechanical Steam Damper Motor Cam
57
* The mechanical steam damper motor cam is part of the mechanical steam damper motor.
Telephone: (508) 678-9000 Fax: (508) 678-9447
58
AD-15/AD-25 Outer Top/Back Guard Assembly
Illus. No. Part No. Qty. Description
1 322809 1 Back Electrical Box Cover 2 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw 3* 330076 1 AD-15 Top Back Guard
330075 1 AD-25 Top Back Guard 4 150301 7 #8-18 x 7/16” Phillips Pan Head TEK Screw 5 150301 10 #8-18 x 7/16” Phillips Pan Head TEK Screw 6** 312532 1 AD-15 Outer Top
312531 1 AD-25 Outer Top 7 330086 1 AD-15 “Plain” Bottom Back Guard
314512 1 AD-25 “Plain” Bottom Back Guard 8 150301 13 #8-18 x 7/16” Phillips Pan Head TEK Screw 9 103500 4 Leveling Leg
* There is no top back guard on gas heat reclaimer models and steam models. ** There is no outer top on gas heat reclaimer models and steam models.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
ADG-15/ADG-25 Heat Reclaimer Assembly
59
Illus. No. Part No. Qty. Description
1* 143513 1 ADG-15DH 6” x 6” x 5” Tee
143501 1 ADG-25DH 8” x 6” x 6” Tee 2 880502 1 6” Replacement Damper Assembly 3 143514 1 ADG-15DH 5” Flexible Duct
143509 1 ADG-25DH 6” Flexible Duct
-- 117505 2 Aluminum Duct Tape (sold by the foot)
* Damper assembly must be purchased separately.
Telephone: (508) 678-9000 Fax: (508) 678-9447
60
NOTE: Coin acceptors listed include optical switch.
Replacement optic switch for Hanke acceptors is ADC Part No. 881143. Replacement optic switch for Greenwald acceptors is ADC Part No. 137056.
Microprocessor Coin Acceptors Listing
Single Coin*
ADC Part No. Nation Description
882689 United States 25¢ Hanke Optic Coin Acceptor
(includes optic switch P/N 881143) (for models mfd. as of June 15, 2000)
125100 U.S. and Canada 25¢ Greenwald Optic Coin Acceptor
(for models mfd. prior to June 15, 2000) 881768 Australia $1 Hanke Australian Optic Coin Acceptor 881604 Japan 100 Yen Hanke Optic Coin Acceptor 125103 --- 0.882 Token Greenwald Optic Coin Acceptor 125121 --- 0.800 Token Greenwald Optic Coin Acceptor 125133 Hong Kong $1 Greenwald Hong Kong Optic Coin Acceptor
Dual Coin*
881842 Canada 25¢/$1 Hanke Dual Optic Coin Acceptor 881542 United Kingdom 1£/20 Pence Hanke Dual Optic Coin Acceptor
* Consult factory for coin acceptors not listed.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
Coin Meter Replacement Parts
61
Illus. No. Part No. Qty. Description
1 125541 1 1/60 RPM 24 VAC/60 Hz Meter Motor
125540 1 1/30 RPM 24 VAC/50 Hz Meter Motor
2 125500 1 2-Point Cam
125501 1 3-Point Cam 125502 1 4-Point Cam 125503 1 5-Point Cam 125504 1 6-Point Cam 125506 1 8-Point Cam 125507 1 9-Point Cam 125508 1 10-Point Cam
125510 1 12-Point Cam 3 125515 1 Meter Switch “B” with Arm 4 125516 2 Meter Switch “A” or “C”
Telephone: (508) 678-9000 Fax: (508) 678-9447
62
AD-15/AD-25 Transformer Usage Listing for Gas/Steam Dryers
AD-15 AND AD-25
HEAT VOLTAGE
208-240 3 or 4 --------- 141403
380 3 or 4 132059 141403
GAS
STEAM
416 3 or 4 132062 141403
460/480 3 or 4 132053 141403
575 3 132050 141403
WIRE
SERVICE
STEP DOWN
TRANSFORMER PART. NO.
CONTROL
VOLTAGE PART NO.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
ADE-15/ADE-25 Transformer Usage Listing for Electric Dryers
ADE-15
63
KW VOLTAGE PHASE WIRE
15 208 3 or 4 ------ 141403 18 460/480 3 132053 141403 12 208 3 ------ 141403 18 208 3 ------ 132070 12 240 3 ------ 141403 18 240 3 ------ 141403 12 380 4 ------ 132082 15 380 4 ------ 132082
11 400 4 ------ 132082 15 400 4 ------ 132082 18 416 4 ------ 132082 15 208 2 ------ 132063 18 208 2 ------ 132063
TRANSFORMER PART NO.
STEP DOWN
CONTROL VOLTAGE
TRANSFORMER PART NO.
12 240 2 ------ 132070
ADE-25
STEP DOWN
KW VOLTAGE PHASE WIRE
25 380 3 or 4 132059 132082 24 208 3 or 4 ------ 132063 24 230 3 ------ 132063 24 416 3 or 4 132062 132082 24 460/480 3 or 4 132053 141403 20 208 2 ------ 132063 20 230 2 ------ 132072 20 380 3 or 4 132059 132082
TRANSFORMER PART NO.
(for 3 wire, 380-480 VAC systems)
CONTROL VOLTAGE
TRANSFORMER PART NO.
Telephone: (508) 678-9000 Fax: (508) 678-9447
64
ADE-15/ADE-25 Electric Oven Component Application Charts
ADE-15
KW VOLTAGE PHASE WIRE
18 460/480 3 or 4 883597 6 3 120007 1 #8 882559 1 121010 2 DPA33 131352 18 416 3 or 4 826389 6 3 120007 1 #8 882558 1 121010 1 DPA33 131352 18 240 3 883542 6 3 120007 1 #8 882558 1 121010 2 DPA43 131357 18 208 3 or 4 824914 6 3 120006 1 #6 882556 1 121010 2 DPA53 131359 18 208 2 883546 6 3 120006 1 #2 883384 1 121010 2 DPA93 131358 15 380 3 or 4 826389 6 3 120007 1 #8 882558 1 121010 1 DPA33 131352 15 208 2 883547 5 3 120006 1 #4 883385 1 121010 1 DPA73 131376 12 240 3 883543 3 4 120009 1 #8 883558 1 121010 2 DPA33 131352 12 240 2 883545 4 3 120007 1 #6 883548 1 121010 1 DPA53 131359 12 208 3 or 4 883544 3 4 120008 1 #8 882558 1 121010 1 DPA33 131352 11 400 4 826401 6 2 120004 1 #8 882558 1 121010 1 DPA33 131352
OVEN
ASSY*
ELEMENT OVEN WIRE
QTY KW PART NO. QTY SIZE PART NO. QTY PART NO. CAT. NO. PART NO.
TERMINAL
LUG
BUS BAR
P/N:
121011
OVEN RELAY
ADE-25
KW VOLTAGE PHASE WIRE
24 460/480 3 or 4 824951 6 4 120009 1 #8 882559 1 121010 2 DPA33 131352 24 416 3 or 4 826394 6 4 120009 1 #8 882558 1 121010 1 DPA33 131352 24 240 3 883557 6 4 120009 1 #6 882556 1 121010 1 DPA63 131369 24 208 3 or 4 824915 6 4 120008 1 #4 882553 1 121010 1 DPA73 131376 20 380 3 or 4 826394 6 4 120009 1 #8 882558 1 121010 2 DPA33 131352 20 240 2 883559 5 4 120009 1 #4 883385 1 121010 2 DPA93 131358 20 208 2 883561 5 4 120008 1 #2 883384 1 121010 2 DPA93 131358
18 460/480 3 or 4 883560 6 3 120007 1 #8 882559 1 121010 2 DPA33 131352 18 416 3 or 4 826389 6 3 120007 1 #8 882558 1 121010 18 240 3 883562 6 3 120007 1 #8 882558 1 121010 2 DPA43 131357 18 240 2 883558 6 3 120007 1 #4 883385 1 121010 2 DPA73 131376 18 208 3 or 4 824914 6 3 120006 1 #6 882556 1 121010 2 DPA53 131359 18 208 2 883563 6 3 120006 1 #2 883384 1 121010 2 DPA93 131358 15 380 3 or 4 826389 6 3 120007 1 #8 882558 6 121010 2 DPA33 131352
OVEN
ASSY*
ELEMENT OVEN WIRE
QTY KW PART NO. QTY SIZE PART NO. QTY PART NO. CAT. NO. PART NO.
TERMINAL
LUG
BUS BAR
P/N:
121011
1
OVEN RELAY
DPA33 131352
* When ordering oven assembly complete, specify 3 or 4 wire when applicable as well as if dryer has
microprocessor controls or non-microprocessor controls.
N/A = Not available.
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
AD-15/AD-25 DSI Burner Assembly Specifications
DSI BURNER ORIFICE LISTING*
65
MODEL NO.
ADG-15D ADG-15DH ADG-25D ADG-25DH
* Consult factory for elevations over 2,000 feet.
HEAT
RECLAIMER
No
Yes
No
Yes
QTY.
2 2 2 2
NATURAL GAS L.P. GAS
D.M.S. PART NO. D.M.S. PART NO.
#42 #43 #32
#34
140810 140809
140851
140852
#54 #54 #50
#51
DSI BURNER ASSEMBLY LISTING
MODEL NO.
ADG-15D ADG-15DH ADG-25D ADG-25DH
BTU/HR
RATING
50,000
47,000
78,000 70,000
HEAT
RECLAIMER
No
Yes
No
Yes
NATURAL GAS
PART NUMBER
809640 809642 809640 809638
L.P. GAS
PART NO.
809641 809643
140848 140848 140802
140801
809641
809639
NOTES:
1.2.Burner assemblies DO NOT include burner orifices. They must be ordered separately.
When ordering burner assemblies, specify model number and if computer or noncomputer controls.
DSI L.P. CONVERSION KIT LISTING*
MODEL NO. KIT PART NO.
ADG-15D/DH
ADG-25D/DH
* Consult factory for elevations over 2,000 feet.
874051
874052
Telephone: (508) 678-9000 Fax: (508) 678-9447
66
Part No. Description
112280 “Lint Screen” Label 112533 “Phase 5 Coin Program Location Summary” Label 112534 “Phase 5 OPL Program Location Summary” Label 114001 “Caution-Exhausted/Lint Screen” Label 114006 “Warning-Fire Hazards” Label 114533 “120V Electric Service” Label 120100 3/8” Straight (BX) Connector 120200 3/8” x 90° (BX) Connector 120300 3/8” x 45° (BX) Connector 120400 3/8” Red Jacket (BX) Insulator 120500 3/8” Jiffy Clip (BX retainer clip) 120600 3/8” Flexible Steel Electrical Conduit 120707 Terminal Strip (2-position) 120708 Terminal Strip (3-position) 120800 1/4” In-Line Connector 120902 #74B Wire Nut 120903 Crimp-On Wire Nut 121499 5-1/2” Harness Tie 121500 8” Harness Tie 121503 Harness Tie Mounting Clip 122804 Manometer (hydro gauge) for Measuring Gas Pressure 404500 Almond Brush-In-Cap Bottle Touch-Up Paint 404502 White Brush-In-Cap Bottle Touch-Up Paint 404507 Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint 404515 Coral Blue Brush-In-Cap Bottle Touch-Up Paint 404516 Ivory Brush-In-Cap Bottle Touch-Up Paint 410001 1/2” Allen Wrench
Additional Parts Available
American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781
ADC 450107 1 - 02/23/93-100 2* 04/20/93-100 3* 07/19/93-100
4 - 01/05/94-100 5* 04/10/95-100 6* 02/08/96-100 7* 05/16/96-100 8* 06/17/97-100 9* 08/03/00-25
10* 03/01/02-25 11 * 12/18/02-20
Loading...