ADC 6016, 6014, 6014P User Manual

11. HOW TO CONTACT US

Electronic

Detailed user information about our products

as well as services can be found at:

www.adctoday.com

Blood Pressure

Printer

For use with ADvantageTMAdvanced Automatic
Blood Pressure Monitors; Models 6014 and 6016.

6014P

Instruction Manual

IB p/n #93-6014P-00 - rev 1

American Diagnostic Corporation

55 Commerce Drive, Hauppauge, New York 11788

Telephone: [phone]

Fax: [phone]

Email: [e-mail]

1-800-232-2670
www.adctoday.com

Call ADC

PLEASE N OTE:

Questions?

®

toll free at 1-800-232-2670

THIS MEDICAL INSTRUMENT MUST BE
USED ACCORDING TO INSTRUCTIONS
TO ENSURE ACCURATE READINGS.

®

American Diagnostic Corp.

Diagnostic Printer

Instruction Manual

Table of Contents

1. Introduction

2. Printer Parts

3. Setting Up the Printer

3.1. Inserting the Batteries

3.2. Using an AC Adapter

3.3. Cable Connection

3.4. Inserting the Paper Roll

4. Carrying Out a Printing Operation

4.1. Power On

4.2. Paper Feeding

4.3. Printing

4.4. Low Voltage Indication

4.5. Power Off

4.6. Cutting Paper

5. How to Print the Last Stored Measurement (One Reading)

5.1. How to Print a Chart and all Readings

6. Troubleshooting

7. Care and Maintenance

8. Warranty

9. International Quality Standards

10. Technical Specifications

11. How to Contact Us

8. WARRANTY

The diagnostic printer 6014P is guaranteed for 2 years from date of purchase. The
warranty does not apply to damage caused by improper handling, accidents, improper
use, or alterations made to the device by third parties.
Batteries or damage from batteries are not covered under warranty.

9. INTERNATIONAL QUALITY STANDARDS

Meets the requirements of MDD 93/42/EEC (Europe) and U.L. (USA).

10. TECHNICAL SPECIFICATIONS

Weight:
Size: 143mm (L) x 81mm (W) x 51mm (H)

Storage temperature / Humidity: -20°C to +50°C / 15% to 90% relative humidity

Operation temperature / Humidity: 10°C to 40°C / 15% to 90% relative humidity

Print system: Thermal serial dot system
Print direction: Left to right
Printer head model no.: SII MTP102-16B
Printer head dimension: 48mm (L) x 31mm (W) x 13.8mm (L)
Printing timing: Synchronized with the tachogenerator
Home position detection: Mechanical switching system
Printing speed: Approx. 1.5 (lines/sec.)
Number of columns: 26 (columns)
Character matrix (HxW): 7x5 (dot)
Printing width / Paper width: 29.0 / 38.0 (mm)
Reliability: 500,000 (lines)
Paper roll: 1" 25mm (standard size)
Power source: 1.5V (AA) alkaline batteries x 4
Low battery: As battery is < 5.0V, LED will flash continuously

Accessories: a) 100cm cable

255g (with batteries) / .88lb

2.75” x 5.25” x 6.25”

maximum

maximum

with 3 Hz

b) PAPER, 5/Pkg

Optional: AC/DC adapter 6V DC, 600mA,

1

* Technical alterations reserved!

50-60 Hz (6013ZAC)
Batteries sold separately

10