Adams Rite MS1852S-456-628, MS1852S-456-313, MS1851SW210-628, MS1851SW210-313, MS1851SW110-628 Specsheet
...
E8211
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS+1890
4300
4510
4530
4900
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
FLUSHBOLTS
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
DIMENSIONS OF CAM TO OPERATE:
DEADLOCKS
MS1850S S ERIES MS® DEADLOCK
Specifications
DL-9
MS1850S Series
MS® Deadlock
ALUMINUM
The MS1850S Deadlock utilizes a laminated stainless steel
bolt, activated by a pivot mechanism to provide maximum
security for a single leaf narrow stile door.
Function
A huge bolt of laminated stainless steel, nearly three inches long, activated by an
uncomplicated pivot mechanism, has made this basic MS® Deadlock the standard
of the narrow stile door industry. The length of this bolt provides maximum
security for a single leaf door, even a very tall and flexible one or an installation
where the gap between the door and jamb is greater than it should be.
GRADE 1
CYLINDER BACKSET
• 7/8", 31/32", 1-1/8", or 1-1/2" only.
CASE
• Steel with corrosion-resistant plating, measures 1" x 6" x
depth. Depth varies by backset (see table on back of page).
BOLT
• 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw. Eight-ply laminated
stainless steel. Center ply has alumina-ceramic core to defeat
any hacksaw attack, including rod-type “super” hacksaws.
FACEPLATE
• Measures 1" x 6-7/8"
STRIKE
• See back of page for dimensions of strike slot which can
be cut in metal jamb. Trim plate, box strike, and armored
strike are available separately.
CYLINDER CAM
• MS1850S Deadlocks are operable by any standard
1-5/32" diameter mortise cylinder with MS® cam
dimensioned as shown. Cylinders with MS® cams can
be readily obtained from most cylinder manufacturers.
See CYLINDERS section for cylinder make, thumbturn
and trim ring information.
Operation
360° turn of key or thumbturn throws or retracts the counterbalanced bolt. Key
can be removed only when bolt is in a positively locked or unlocked position. Lock
accepts any standard 1-5/32" diameter mor tise cylinder or thumbturn from either
or both sides. Cylinder must have MS® dimensioned cam.
ARM-014-9/14
.800" ± .005"
“Dim A”
20.3mm ± .127mm
.120"
R
3.0mm
.182"
4.6mm
OPTIONS
• For jambs too narrow to accept the long bolt, the
MS1850S-050 offers a shorter bolt with hook shape to
provide equal security against door-prying attempts.
1850S-020 short throw without hook is also available.
Second and third point locking bolts are available for pairs
of doors. All use any make standard mortise cylinder and
thus can be keyed into systems with other types of doors.
“SCHOOLHOUSE” version, also available, is modified
so that operation from inside is “unlock only”. This lock is
handed and must be specified LH or RH. Specify Series
SCH1850S. Same faceplate and backset options as
Series MS1850S. Operation from inside, with standard
Adams Rite 4066 Turn or with 4550 Deadlock Lever. For
wood or hollow metal, see MS1850SN.
STA N DARD PAC K AGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns available separately.
Shipping weight: 1-1/2 lbs.
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
DL-10
®
MS1850S S ERIES MS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
DEADLOCK
DEADLOCKS
Dimensions Stile Preparation
1"
53/64"
21
mm
“A”
29/64"
11.5
mm
SHOWN WITH
FLAT FACEPLATE
25.4mm
HOW BACKSET
IS MEASURED:
CYLINDER
C
L
FLAT
C
L
6-57/64"
6-53/64"
173.4
mm
29/64"
11.5mm
6"
152.4mm
BACKSET MEASURED
AT CENTERLINE OF
STILE NOSE
1/4"
6.4mm
6-3/8"
161.9mm
1-13/32"
35.7mm
BACKSET “A”
6-7/8"
174.6
mm
ARMORED FACEPLATE
7/8"
mm
22
31/32"
24.6
1-1/8"
28.6
1-1/2"
38 .1
RADIUS
BEVEL
mm
mm
mm
1" X 6-7/8"
FLAT MS185 0S
1-9/16 "
mm
34.7
1-5/8"
mm
41.3
1-25/32"
mm
45.2
2-1/4"
mm
57. 2
C
L
C
L
5/32"
(4 PLCS.)
Lock & Cylinder
Installation
1-3/8"
34.9mm
LOCK & STILE
STRIKE
CUTOUT
11/16"
17.5
mm
CYLINDER
175mm
mm
4
1-19/32"
40.5mm
R
STILE
1-1/64"
25.8mm
BACKSET
1-1/4"
31.8mm
DIA. HOLE
1"
1/4"
6.4mm
RADI US MS1851S
RADIUS W/ WEATHERSTRIP
LH BEVEL M S1852S-X15
RH BEVE L MS1852S-X16
HOW TO ORDER MS1850S SERIES MS
MS1851SW
®
DEADLOCK
3-3/8"
85.7mm
25.4mm
59/64"
23.4mm
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEP LAT E BACKSET HANDING FINISH
MS185 0S - 2 - 10 - 628
0S Flat 1 7/8" 15 LH or RHR 313 Dark Bronze Anodized
1S Radius 2 31/32" 16 RH or LHR 335 Black Anodized
1SW Radius with weatherstrip 3 1-1/8" 10 Non-Handed* 628 Clear Anodized
2S Bevel 4 1-1/2"
*Any flat or radius faceplate, except Schoolhouse.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Special Order Options
4015 Threshold Bolt or 4016 Header Bolt for multipoint locking.
4085 Header Bolt for pairs of doors.
4000, 4001, MS4002 Deadlock Strikes.
Lock mounting accessories and options.
MS1850S Deadlocks are operable
by any standard 1-5/32" diameter
mortise cylinder with MS
®
cam.
Deadlock lever trim
and keyless entry trim.
Exit indicators.
Schoolhouse function available as
special order.
©2014, Hanchett Entr y Systems, Inc., an ASSA ABLOY Group company.
Loading...