Adams Rite 4000-011-313, 4000-011-335, 4000-011-628, 4000-012-313, 4000-012-335 Specsheet
...
ACCESSORIES
4000 Series MS®
Deadlock Strikes
ALUMINUM
HOLLOW
METAL
4000 Series MS® Deadlock Strikes add aesthetics
and finish to strike cutouts in jambs.
Function
The majority of Adams Rite MS® deadlocks are installed in metal construction where
the strike cutout can be simply a slot in the jamb. However, for aesthetic reasons or in
the case of the MS4002 for added security, many who specify the MS deadlock add
one of these strikes.
Specifications
4000 TRIM STRIKE
• A simple strike plate that can be surface mounted on a wood or metal jamb or
mortised flush. Furnished with two #10 flat head machine screws and two #10 flat
head wood screws.
• Material & Finish: Made of aluminum. Available in US28 (628), clear anodized,
313 dark bronze anodized, and 335 black anodized.
WOOD
4000 SERIES MS® DEADLOCK STRIKES
4001 BOX STRIKE
• Same trim plate as 4000, but with dust box added. Customarily
used only for wood construction where the dust box prevents
chips, sawdust, and other debris from entering strike. Furnished
with both wood and machine screws.
• Material & Finish: Trim plate is aluminum, box is steel
plated for corrosion resistance. Available in US28 (628)
clear anodized, 313 dark bronze anodized, and 335
black anodized.
MS4002 ARMORED STRIKE
• Same trim plate as 4000 and 4001, but backed up by a
massive steel doubler designed to prevent the method of
forced entry known as “jamb peeling”. Fits within aluminum
or other hollow jamb sections with trim face flush, the steel
completely hidden. Available flat or radiused, for pairs of
doors*, and to fit all MS® deadlocks, including the hookbolt
version in sliding doors (hookbolt use dictates door/jamb
gap of 1/8" or less). Unhanded, may be used with RH or LH
swinging or sliding doors.
*Can be used with two-point and three-point MS locks.
• Material & Finish: Trim plate is aluminum. Reinforcement
doubler is steel plated for corrosion resistance. Available in
US28 (628), clear anodized, 313 dark bronze anodized, and
335 black anodized.
4003 ANSI STRIKE
• The 4003 strike is designed for ANSI applications for use with
the MS1850SN Deadlock.
• Material & Finish: Trim plate is stainless steel. Available in
605 bright brass, 626 satin chrome and 119 black and 121
dark bronze.
4005 THRESHOLD STRIKE
• The 4005 Threshold Strike is designed for a drop-bolt such
as 4015 Threshold Bolt or 4016 Header Bolt in non-metal
installations such as wood or concrete.
• Material & Finish: Trim plate is stainless steel. Available in
630 satin stainless steel.
A-1
MS4 002-012
4000-012
ARM-014-9/14
4006 FLOOR STRIKE
• Similar to 4001 Box Strike, the 4006 Floor Strike is a trim plate
with dust box added for strike slot cut into metal thresholds.
Designed for use with the 1830 Bottom Rail Deadlock.
• Material & Finish: Trim plate is stainless steel. Available in
630 satin stainless steel, 119 black and 121 dark bronze.
OPTIONS
• Specify flat or radius shape of trim plate, round or
square corners and lock compatibility when ordering.
4003-01 ANSI-dimensional lipped strike also available
for MS1850SN Deadbolt.
4001-032
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
A-2
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
4000 SERIES MS® DEADLOCK STRIKES
ACCESSORIES
Dimensions Mortise Jamb Installation
4000 Trim Strike
Strike plate only
1-1/4"
31.8mm
CYLINDER
4-1/8"
104.8mm
4-7/8"
123.8mm
MAY BE
SURFACE
MOUNTED
OR
MORTISED
1/8"
3.2mm
1/2"*
12.7mm
*FOR
HOOKBOLT
ONLY:
53/64"
21mm
MS4002 Armored Strike
Strike plate with Reinforcement
1-1/4"
31.8mm
4001 Box Strike
Strike plate with dust box
4-7/8"
123.8mm
4-1/8"
104.8mm
1-1/2"
1-1/4"
31.8mm
HOOKBOLT
REQUIRES
JAMB GAP
1/8"
3.2mm
OR LESS
1/8"
3.2mm
38.1mm
1/32"
.8mm
3-7/16"
87.3mm
DUST BOX
TRIM
PLATE
Hollow Channel Jamb Preperation
DRILL AND CSK FOR
#10 FLAT HEAD
MACHINE SCREWS
(2 PLACES)
FOUR SCREWS
FURNISHED
5/32"
R
11-47/64"
298.1mm
9-1/2"
241.3mm
4-1/8"
104.8mm
4-7/8"
123.8mm
1/8"
3.2mm
1-1/8"
28.6mm
MOUNTING
HOLES
FOR 3PT
ROD GUIDE
TRIM
PLATE
4mm
1-17/64"
32.1mm
HOW TO ORDER 4000, 4001, MS4002 DEADBOLT STRIKES
Specify quantity and the following information. Order related products separately.
STRIKE MODEL TRIM PL ATE SHAPE COMPATIBLE DEADLOCK TRIM PLATE CORNERS FINISH
4001 -0 1 1 -313
4000 Trim Strike 0 Flat 1 All Standard MS® locks with 1-3/8" Bolt Throw 1 Square 313 Dark Bronze Anodized
4001 Box Strike 1 Radius 2 1850A- 020 with 3/4" Bolt Throw Only 2 Round 335 Black Anodized
MS4002 Armored Strike 3 All MS-050 " Hookbolt" locks 628 Clear Anodized
4-57/64"
124.2mm
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlocks
Most Adams Rite Deadlocks
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
Loading...