Adams Spt-400lp Owner's Manual

HU UPSHOT AND HA INSHOT BURNERS
Rugged cast iron adjustable venturi – places the flame in optimum location for oil furnaces.
Readily removable pilot, flame spreader and pilot lighter. Durable pre-drilled steel mounting flange – for easy
mounting. Optional adjustable orifice available. Gas Saver model available – pilot light is on only during
SPT ECONOMY UPSHOT BURNER
Adjustable venturi length and height – places flame in optimum location for virtually all coal furnaces or boilers. Rugged cast iron flame spreader.
Extremely compact design – fits where other burners will not.
Trim plate mounting for ease of installation. Optional adjustable orifice, extra length riser available. Gas Saver model available – pilot light is on only during
heating cycle.
HP – SPACESAVER POWER BURNER
COMPACT DESIGN – SAVES SPACE – ADJUSTABLE ORIFICE
Fits the smallest enclosures. Easily accessible air and firing rate adjustment. Completely factory wired with motor, transformer, and
terminal block mounting on slide out chassis. Slide out gas valve and manifold. Rugged steel mounting flange, 5" or 8" extension sleeve
optional. Constant or intermittent pilot.
G-2– POWER GAS BURNER
A revoluntionary partial pre-mix system uses Adams unique eductor-venturi concept.
High static pressure capabilities assure firing even under adverse conditions.
For dependable direct spark ignition, the burner uses a separate high voltage transformer.
A special designed manifold permits external orfice changes without the need of disassembling the burner.
Six different stainless steel flame retention heads available to cover most input ranges.
®
HU UPSHOT
HA INSHOT
SPT ECONOMY
HP–SPACESAVER
G-2 POWER GAS BURNER
Loading...
+ 2 hidden pages