Adam Equipment AELP 1000, AELP 2000, AELP 3000 User Manual

A dam Equipment

AELP

PALLET BEAMS SCALES

(P.N. 4327, Rev. A7, Mar 2016)

CONTENTS

1.0 INTRODUCTION ........................................................................................................... 2

2.0 TECHNICAL SPECIFICATIONS .................................................................................... 3

3.0 UNPACKING THE SCALE ............................................................................................. 4

4.0 SETTING UP THE SCALE ............................................................................................ 4

5.0 KEYPAD AND DISPLAY ................................................................................................ 5

5.1 KEY DESCRIPTION ................................................................................................... 5

5.2 DISPLAY SYMBOLS .................................................................................................. 6

6.0 FUNCTIONS .................................................................................................................. 6

6.1 BL = AUTOMATIC BACKLIGHT CONTROL ................................................................ 7

6.2 AVE = DISPLAY AVERAGING RATE ........................................................................... 8

6.3 FIL = ADC FILTER RATE ............................................................................................. 8

6.4 BOD = BAUD RATE SELECTION .................................................................................. 8

6.5 CONT = CONTINUOUS PRINTING ................................................................................ 9

6.6 PIECE = PARTS COUNTING ........................................................................................ 9

6.7 STEPS = CHECK-WEIGHING FUNCTION (LOW-OK-HIGH) ...................................... 11

6.8 CALIBR = CALIBRATION ROUTINE ........................................................................... 12

6.9 REPL = RESULTS PRINTED AUTOMATICALLY OR MANUALLY .............................. 12

6.10 STAB = PRINT WHEN STABLE OR INSTANTANEOUS .............................................. 13

6.11 AUT = AUTOZERO FUNCTION .................................................................................. 13

6.12 T1 = AUTOMATIC POWER SWITCH OFF ................................................................ 14

6.13 TOP = HOLD MAXIMUM VALUE ................................................................................. 14

6.14 NE = WEIGH IN NEWTONS ....................................................................................... 14

6.15 SUPP = POWER SUPPLY VOLTAGE TO PCB ..................................................................... 15

7.0 COMMUNICATION WITH A COMPUTER/P RINTER .................................................. 15

7.1 PARAMETER ........................................................................................................... 15

7.2 CONNECTION ......................................................................................................... 15

7.3 OUTPUT FORMAT ................................................................................................... 16

7.4 INPUT COMMANDS FORMAT ................................................................................. 16

1.0 INTRODUCTION

AELP Pallet Beam Scales come with the following standard features:

• Lightweight for ease of handling

• Supplied with optional indicator if required

• Precision load cells for acc ur at e weighing results every time

• Handles for portability

• Low profile beams to allow easy weighing of pallets

• 2 beams per set

Models

Maximum Cap aci ty

Readability

Repeatability Linearity (±)

Internal counting resolution

Tare ra ng e Stabilis at ion time

U nit s of measur e Interface Operating temperature

Power supp l y Calibration

Display

Pan size

Functions

O ther f eatures

AEL P 500

AEL P 200 0

500 kg 2000 kg

200 g

500 g 200 g 500 g 200 g 1000 g

Up to 60,000 divisions

Full

Typically 3 seconds

Kg, g, t or lb

R S- 23 2 b i- dir ec tio na l Inte rface

0 to 4 0° C

10.5 VAC external adapter 6 x AA size Alkaline Dry-cell batteries are suggested

Pu s h b utton cali br at ion

mm LCD displays

1250 x 80 x 60 m m

Averaging level, baud rate, print when scale becomes stable or manually, pr int when stable or at any time, auto-zero di sable,

automatic power off, enable maximum value hol d, enable weighing in Newtons

Parts Counting and Check-weighing

N et we i ght

Resolution

200 g

500 g

28 .3 k g

2.0 TECHNICAL SPECIFICATIONS

NEEDS REVISION

3.0 UNPACKING THE SCALE

• Remove the 2 sets of pallet beams using the handles pr ovided.

• Take care while removing the beams to avoid banging or injury.

• Remove the Indicator and the power supply adapter packed seperately.

• Place it on a levelled and firm floor.

• Position the beams side by side.

4.0 SETTING UP THE SCALE

• Plug in the Indicator into the soc ket provided at the back of the pallet beam (the one having two sockets).

• Ensure both the beams are connected via the beam-to-beam cable.

• Attach the Power Supply adapter to the Indicator and switch the main supply to ON.

• Read this User Manual before starting t he weighing operation.

• Place the pallet s on t he beams f or weighing.

+ 14 hidden pages