Adamatic TG-50, TG50 User Manual
Product Line
Model
THERMOGLAZE TG50
Thermoglaze is a system that thaws, heats, and
glazes frozen donuts. The Thermoglaze system
provides a method for preparing pre-fried frozen
donuts, and other baked goods, with results that
equal and often surpass the quality of freshly made
product.
Thermoglaze can process all the varieties of frozen
donuts currently available including ring donuts,
fritters, long johns, cream and jam-filled donuts and
many others. Thermoglaze is easy to learn, can be
used in front of customers, and requires no ventilation
hood.
The Thermoglaze TG50 processes approximately
50-75 dozen donuts per hour. Heating time and
temperture can be modified to suit the product.
The Thermoglaze TG50 uses 17" x 25" (43 x 64 cm)
glazing screens, Belshaw Part Nbr. SL-0004. Each
screen holds 2 dozen donuts. 24 or more screens are
recommended.
Frozen donuts (or similar product) are first thawed
in a proofer at approximately 105°F (40°C). Donuts
can be held in a proofer for up to five hours before
processing in the TG50.
After thawing/holding in a proofer, the screens full of
donuts are placed on the TG50's conveyor for heating
and glazing. This takes less than 5 minutes.
Glaze is pumped up to a dispenser which coats each
donut with a 1/8” thick curtain of glaze as they pass
through. For iced donuts, the flow of glaze is turned
off, and donuts can be iced on a Belshaw H&I-2 or
H&I-4 icer.
THERMOGLAZE Frozen Donut Processing
TG50
TG50 (front view)
SPEC
TG50/
01-2013
TG50 (rear view) TG50 glazer in operation Filled donuts after glazing on TG50
90 Years of Quality Donut & Bakery Equipment
BELSHAW ADAMATIC BAKERY GROUP
814 44th St NW, Suite 103
Auburn, WA 98001 USA
PART OF ALI GROUP SPA
©Belshaw Adamatic Bakery Group Product specifications may be changed without notice. Current version available at www.belshaw-adamatic.com
CONTACT
800.578.2547 (USA/CANADA)
(+1)206.322.5474 Worldwide
service@belshaw.com
WEB
www.belshaw-adamatic.com
www.belshaw.com
www.adamatic.com
SPEC
TG50/01-2013
Page 1 of 2
THERMOGLAZE TG50 STANDARD FEATURES
▪ Simple 2-switch operation (Oven and Glazer)
▪ Capacity 50-75 dozen donuts/hour
▪ No ventilation hood or fire suppression system normally
required. (Verify with local authorities)
▪ Heavy duty glaze pump
▪ Speed and temperature adjustable inside control box
▪ Quiet operation
▪ Glaze pump can be switched on/off as required
▪ All stainless steel construction
▪ Easy to clean oven interior
▪ 2 Teflon handles supplied for picking up screens
▪ Spare gaskets kit
▪ 4" (25mm) casters, locking
▪ Lock-out feature to prevent machine starting while cleaning
is in progress
▪ 24 to 60 screens are recommended depending on the
amount of donuts produced
Product Line
Overall Height:
54” (137 cm)
Overall Depth:
34” (86 cm)
THERMOGLAZE
TG50
Overall Width:
84” (213 cm)
SPEC
TG50/01-2013Model
CERTIFICATIONS
▪ TG50 208V/60/1 is ETL certified to UL-197, CSA C22.2 and
NSF-4
▪ TG50 models shipped to European Union conform to CE
requirements, unless otherwise stated at time of purchase
SCREENS
▪ TG50 uses
donuts each,
recommended. (Pictured below)
uses glazing screens 17" x 25" holding 24
Part Number SL200-0004
. At least 24 screens
ELECTRICAL DATA
▪ Volts: 208 Volts, 60 Hertz, 1 phase
▪ Amps: 32.2A
▪ Kilowatts: 6.7 KW
▪ Plug: 360P6W (Consult factory at time of order)
▪ Cord: 72" (1.8m)
▪ Worldwide voltages available
SHIPPING DATA
▪ Shipped on pallet
▪ Width: 92" (185 cm)
▪ Depth: 39" (107 cm)
▪ Height: 58" (158 cm)
▪ Shipping weight: 630 lbs (295 kg)
▪ Freight class: 85
▪ Screen weight: 45 lbs/21 kg per dozen screens
OPTIONAL ACCESSORY: H&I-2 OR H&I-4 ICER
Water-warmed icing tables for applying icings to donuts warmed on the
Thermoglaze system.
▪ H&I-2 Icer: Two 13" bowls
▪ H&I-4 Icer: Four 13" bowls
▪ H&I-2/4 spec sheet: http://www.belshaw-adamatic.com/products/
doughnut-icers/hi4-donut-icer.html
90 Years of Quality Donut & Bakery Equipment
BELSHAW ADAMATIC BAKERY GROUP
814 44th St NW, Suite 103
Auburn, WA 98001 USA
PART OF ALI GROUP SPA
©Belshaw Adamatic Bakery Group Product specifications may be changed without notice. Current version available at www.belshaw-adamatic.com
CONTACT
800.578.2547 (USA/CANADA)
(+1)206.322.5474 Worldwide
service@belshaw.com
WEB
www.belshaw-adamatic.com
www.belshaw.com
www.adamatic.com
SPEC
TG50/01-2013
Page 2 of 2
Loading...