Please read this important information before using your monitor.
☞Please remember that only a medical practitioner is qualified
to interpret your blood pressure measurements. Use of this
device should not replace regular medical examinations.
☞Have your physician review your procedure for using this
device. He or she will want to verify blood pressure
measurements before prescribing or adjusting medications.
☞Consult your physician if you have any doubt about your
readings. Should a mechanical problem occur, contact
A&D Medical.
☞Do not attempt to service, calibrate, or repair this device.
☞Because your UA-774 monitor contains delicate, high-
precision parts, avoid exposing it to extremes in temperature
or humidity or to direct sunlight, shock and dust. A&D
Medical guarantees the accuracy of this device only when it is
stored and used within the temperature and humidity ranges
noted on page E-17.
☞Clean the monitor and cuff with a dry, soft cloth or a cloth
dampened with water and a mild detergent. Never use alcohol,
benzene, thinner or other harsh chemicals to clean monitor or
cuff.
☞Remove and replace batteries if monitor is not used for more
than six months
PRECAUTIONS
The UA-774 is designed to be used at home, by those who
are eighteen (18) years and older, to monitor blood pressure
(systolic and diastolic) and pulse rate. It is not designed for
.
ambulatory use.
TM
Congratulations on purchasing a state-of-the-art
LifeSource blood pressure monitor—one of the most
technologically advanced monitors available today.
Designed for ease of use and accuracy, this monitor
will facilitate your daily blood pressure regimen.
Physicians agree that daily self-monitoring of blood
pressure is an important step individuals can take to
maintain cardiovascular health and prevent the serious
consequences associated with undetected and untreated
hypertension.
A&D Medical has been manufacturing high quality
healthcare products for over 20 years. We are committed to
providing you and your family with monitoring devices that
provide the utmost in accuracy and convenience.
LifeSource Health Line (Toll-Free): 1-888-726-9966
The indicator while
measurement is in progress.
It blinks while detecting the
pulse.
An irregular heartbeat or
body movement may have
occurred. Refer to page E-10
for more information on
irregular heartbeats.
Previous measurement
stored in MEMORY.
The battery power indicator
during measurement.
The batteries are low when
it blinks.
Unstable blood pressure due
to excessive body
movement.
Recommended
Action
Measurement is in progress,
remain as still as possible.
Take measurement again
and consult with your
physician.
Replace all batteries with
new ones when the
indicator blinks.
Try the measurement again.
Remain very still during the
measurement.
E-2
PUL. DISPLAY ERROR
?
The systolic and diastolic
values are within 10 mmHg
of each other.
The pressure value did not
increase during inflation.
The cuff is not fastened
correctly.
The pulse is not detected
correctly.
Pressure Indicator
LifeSource Health Line (Toll-Free): 1-888-726-9966
Fasten the cuff correctly,
and try the measurement
again.
Check for air leaks along
the tube and around the
air socket.
Refasten the cuff and
retake measurement
Try the measurement again.
Remain very still during
the measurement.
Measurement is in progress,
remain as still as possible.
SYSTOLIC DISPLAY
DIASTOLIC DISPLAY
AIR CONNECTOR
AIR SOCKET
CUFF
MONITOR COMPONENTS
AC ADAPTER
JACK
PULSE DISPLAY
START BUTTONS
?
BATTERY COMPARTMENT
TUBE
In Canada (Toll-Free): 1-800-463-5414
?
E-3
HOW UA-774 WORKS
?
LifeSource™ Blood Pressure Monitors are easy to use, accurate and
digitally display full measurement readouts. Our technology is
based on the “oscillometric method” — a noninvasive blood
pressure determination. The term “oscillation” refers to any
measure of vibrations caused by the arterial pulse. Our monitor
examines the pulsatile pressure generated by the arterial wall as it
expands and contracts against the cuff with each heartbeat.
The cuff is inflated until the artery is fully blocked. The inflation
speed is maximized and the pressure level is optimized by the
device. The monitor takes measurements while the cuff is both
inflating and deflating. This results in a faster measurement
providing greater comfort to the user.
BEFORE YOU START
You must install 4 type AA (1.5 volt) batteries, or use the AC
Adapter (see page E-11 for using the Monitor with AC Adapter)
and attach the cuff to the monitor before using it. To install
batteries (or replace them if the “Low Battery” symbol appears on
display), proceed as follows:
1. Remove battery compartment cover by
gently pushing down on arrow and
sliding cover forward.
2. Put in top row of batteries first. Place the
batteries in compartment with positive
(+) and negative (–) terminals matching
those indicated in the compartment. Be sure batteries make
contact with compartment terminals.
+-+-
+-+-
OPEN
3. Replace cover by sliding it into the compartment and gently
pressing into place.
E-4
?
LifeSource Health Line (Toll-Free): 1-888-726-9966
Loading...
+ 15 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.