Technical Data ........................................................................ 26
English 1
Dear Customers
Congratulations on purchasing a state-of-the-art A&D blood pressure
monitor, one of the most advanced monitors available today. Designed
for ease of use and accuracy, this monitor will facilitate your daily blood
pressure regimen.
We recommend that you read through this manual carefully before
using the device for the first time.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by A&D is under license.
Other trademarks and trade names are those of their respective owners.
Preliminary Remarks
This device conforms to the European Directive 93/42 EEC for Medical
Products. This is made evident by the mark of conformity. (0123:
The reference number to the involved notified body)
Hereby, A&D Company, Limited declares that the radio equipment type
UA-1200BLE is in compliance with Directive 2014/53/EU. The full text of
the EU declaration is available at the following internet address:
http://www.aandd.jp/products/manual/manual_medical.html
The device is designed for use on adults, not newborns or infants.
Environment for use. The device is for use to operate by yourself
in the home healthcare environment.
This device is designed to measure blood pressure and pulse rate of people
for diagnosis.
English 2
Precautions
Precision components are used in the construction of this device.
Extremes in temperature, humidity, direct sunlight, shock or dust should
be avoided.
Clean the device and cuff with a dry, soft cloth or a cloth dampened with
water and a neutral detergent. Never use alcohol, benzene, thinner or
other harsh chemicals to clean the device or cuff.
The device and cuff are not water resistant. Prevent rain, sweat and
water from soiling the device and cuff.
Measurements may be distorted if the device is used close to televisions,
microwave ovens, cellular telephones, X-ray or other devices with strong
electrical fields.
When reusing the device, confirm that it is clean.
Used equipment, parts and batteries are not treated as ordinary
household waste, and must be disposed of according to the applicable
local regulations.
Do not modify the device. It may cause accidents or damage to the device.
To measure blood pressure, the wrist must be squeezed by the cuff hard
enough to temporarily stop blood flow through the artery. This may cause
pain, numbness or a temporary red mark to the wrist. This condition will
appear especially when measurement is repeated successively.
Any pain, numbness, or red marks will disappear with time.
If you feel strong pain during the measurement, please remove the cuff.
Measuring blood pressure too frequently may cause harm due to blood
flow interference.
Avoid tightly folding the cuff for long periods, as such treatment may
shorten the life of the components.
When the AC adapter is used, make sure that it can be readily removed
from the electrical outlet when necessary.
English 3
Sometimes the temperature of the cuff can reach 44 °C in an ambient
temperature of 40 °C. If you feel the cuff is too hot, please remove the
cuff immediately.
Please do not simultaneous use HF surgical equipment.
Clinical testing has not been conducted on newborn infants and pregnant
woman. Do not use on newborn infants or pregnant woman.
If you have had a mastectomy, please consult a doctor before using the
device.
Do not let children use the device by themselves and do not use the
device in a place within the reach of infants. It may cause accidents or
damage.
There are small parts that may cause a choking hazard if swallowed by
mistake by infants.
Do not touch the batteries and the patient at the same time. That may
result in electrical shock.
Wireless communication devices, such as home networking devices,
mobile phones, cordless phones and their base stations, walkie-talkies
can affect this blood pressure monitor. Therefore, a minimum distance of
30 cm should be kept from such devices.
Unplugthe ac adapter when not in use during the measurement.
Use of accessories not detailed in this manual may compromise safety.
Should the battery short-circuit, it may become hot and potentially cause
bums.
Allow the device to adapt to the surrounding environment before use
(about one hour).
Do not inflate without wrapping the cuff around the upper arm.
The automatic blood pressure monitor's performance may be afficted by
excessive temperature or humidity, or altitude.
English 4
Contraindications
The following are precautions for proper use of the device.
Do not apply the cuff on wrist in which another medical device is
attached. The equipment may not function properly.
People who have a severe circulatory deficit in the wrist must consult a
doctor before using the device, to avoid medical problems.
Do not self-diagnose the measurement results and start treatment by yourself.
Always consult your doctor for evaluation of the results and treatment.
Do not apply the cuff on wrist with an unhealed wound.
Do not apply the cuff on wrist receiving an intravenous drip or blood
transfusion. It may cause injury.
Do not use the device where flammable gases such as anesthetic gases
are present. It may cause an explosion.
Do not use the device in highly concentrated oxygen environments, such as a
high-pressure oxygen chamber or an oxygen tent. It may cause a fire or explosion.
English 5
Parts Identification
RED LED
OLED
Start Switch
Reset Switch
Cuff
USB Connector
・1 Blood Pressure Monitor
・1 Instruction Manual
・1 Charging Cable
Contents
English 6
Symbols
Symbols that are printed on the device case and cuff
Symbols Function / Meaning
IP
SN
Standby and Turn the device on.
Direct current
Type BF: Device and cuff are designed to provide special
protection against electrical shocks.
EC directive medical device label
EU-representative
Manufacturer
Date of manufacture
International protection symbol: IP classification is degrees of
protection provided by enclosures in accordance with IEC
60529. This device is protected against solid foreign objects of
12mm diameter and greater such as a finger. This device is
not protected against water.
WEEE label
Serial number
BT
Bluetooth address
Refer to instruction manual/booklet
To indicate generally elevated, potentially hazardous, levels of
non-ionizing radiation, or to indicate equipment or systems e.g.
in the medical electrical area that include RF transmitters or
that intentionally apply RF electromagnetic energy for diagnosis
or treatment.
Keep dry
Universal Serial Bus
English 7
Symbols
Symbols that appear on the display
Symbols Function / Meaning Recommended Action
SYS
DIA
PUL
PUL
E
/min
Err 1
Systolic blood pressure in mmHg.
Diastolic blood pressure in mmHg
Pulse per minute
The battery power is low.
User Select mode
Application is connected with the
device.
Application has disconnected from
the device.
Appears while measurement is in
progress.
The pulse is not detected correctly.
Unstable blood pressure due to
movement during measurement. The
systolic and diastolic values are
within 10mmHg of each other.
Charge the device
Select the user
Measurement is in
progress. Remain as
still as possible.
Apply the cuff correctly,
and take another
measurement.
Take another
measurement. Remain
still during measurement.
The pressure value did not increase
Err 3
Err 9
during inflation. The cuff is not
applied correctly.
Blood pressure monitor internal error.
Data is transferring
Airplane mode
Apply the cuff correctly,
and take another
measurement.
Press the reset button.
After reset,clock data
will disappear. If the
error still appears,
contact A&D Medical.
Measurements can be
taken but device will not
transmit data wirelessly.
English 8
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.