AcuRite 01604, 01645 Instruction Manual
Instruction Manual
Weather Center
model 01604 / 01645
CONTENTS
Unpacking Instructions................2
Package Contents.......................2
Product Registration.................... 2
Features & Benefits: 3-in-1 ..........3
Features & Benefits: Display .......4
Setup ........................................6
3-in-1 Sensor Setup.................... 6
Display Setup............................. 7
Set the Time, Date & Units........... 8
Placement Guidelines .................9
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
3-in-1 Sensor Installation ..........10
Using the Weather Center......... 11
Troubleshooting........................13
Care & Maintenance ................15
Calibration ..............................15
Replace Intelli-Time® Battery...... 16
Specifications........................... 17
FCC Information.......................17
Customer Support ....................18
Warranty.................................18
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective film that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display
2. 3-in-1 Sensor
3. Sensor Mounting Bracket
4. Mounting Hardware
5. Power Adapter
6. Instruction Manual
PRODUCT MUST BE REGISTERED
IMPORTANT
TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online to receive 1 year warranty protection
www.AcuRite.com
2
Features & Benets
1
4
2
5
3-in-1 SENSOR
1. Temperature & Humidity Sensors
(internal)
2. Release Lever for Battery Access
3. Mounting Point
4. Wind Speed Anemometer
6
3
5. Mounting Hardware
Includes anchors and screws.
Qty Diameter Length
4 #4 1”
1 #6 or #8 1/4” or 3/8”
6. Mounting Bracket
7. A-B-C Switch (not shown)
ID code that must match display’s
A-B-C switch to ensure units
synchronize.
3
Features & Benets
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
24
23
22
21
20
19
18
17
16
25
26
27
28
29
30
31
32
33
4
34
FRONT OF DISPLAY
1. Sensor Low Battery Indicator
2. Current Outdoor Temperature
Arrow icon indicates the direction
the temperature is trending.
3. Seasonal Information
Wind chill will show when
temperatures are below 40
Dew Point when temperature is
o
41-79
F (5-26oC), and Heat Index
when temperature is over 80
4. Average Wind Speed
Based on all wind speed readings
from the past 2 minutes.
5. Current Wind Speed
6. Learning Mode Icon
Disappears after weather forecast
self-calibration is complete.
7. 12 to 24 Hour Weather Forecast
Self-Calibrating Forecasting pulls data
from your sensor to generate your
personal forecast.
8. Humidity Level Indicator
Indicates a high or low indoor
humidity level.
9. Current Indoor Temperature
Arrow icon indicates the direction
the temperature is trending.
10. TODAY Icon
Indicates today’s records are being
viewed.
11. Moon Phase
12. ALL-TIME Icon
Indicates all-time records are being
viewed.
13. Icon
ox
Indicates SET mode is active.
14. Intelli-Time® Clock
Automatically updates itself for
Daylight Saving Time.
15. Backlight Button
For momentary backlight and dimmer
settings.
o
F (4oC),
o
F (27oC).
16. AUTO DIM Mode Indicator (page 8)
17. Display Low Battery Indicator
18. Date
19. Current Indoor Humidity
Arrow icon indicates the direction
the humidity is trending.
20. Storm Indicator
Indicates a rapid drop in pressure
and probable storms.
21. Current Barometric Pressure
22. Peak Wind Speed
Highest speed from past 60 minutes.
23. Current Outdoor Humidity
Arrow icon indicates the direction
the humidity is trending.
24. Outdoor Sensor Signal Strength
BACK OF DISPLAY
25. Button
For setup preferences.
ox
26. Button
For setup preferences.
27. Button
For setup preferences.
28. Button
Press to access all-time high and low
records.
29. A-B-C Switch
ID code that must match sensor’s
A-B-C switch to ensure units synchronize.
30. Reset Button
Full reset to factory defaults.
31. Intelli-Time® Battery Compartment
32. Battery Compartment
33. Plug-in for Power Adapter
34. Power Adapter
35. Battery Compartment Cover
(not shown)
5
SETUP
3-IN-1 Sensor Setup
Set the A-B-C Switch
1
The A-B-C switch is located inside
•
the battery compartment. It can
be set to A, B or C. However,
you must select the same letter
choices for both the sensor and
the display in order for the units
to synchronize.
2
Install or Replace Batteries
AcuRite recommends high quality
•
alkaline or lithium batteries for
the best product performance.
Heavy duty or rechargeable
batteries are not recommended.
The 3-in-1 sensor requires lithium
batteries in low temperature
conditions. Cold temperatures
can cause alkaline batteries to
function improperly. Use lithium
batteries in the 3-in-1 sensor for
temperatures below -4ºF / -20ºC.
1. Press the release lever and pull
off the lower housing of the
sensor.
2. Remove the battery
compartment cover. Take
note of the A-B-C switch
setting inside the battery
compartment.
3. Insert 4 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
4. Replace the battery cover and
lower housing of the sensor.
A B C
A-B-C Switch
1
Set to match
display
Install Batteries
2
4 AA batteries
ALKALINE
BATTERIES
6
(700C) 158°F I
Loading...