ye:
3g•10d1y st
low high
12:3S pm
INDOOR
,nOf
,u ..
~
Instruction Manual
Thermometer
model 00826
W.....,
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets................. 2
Setup .................................... 4
Install or Replace Batteries...... 4
Set the Time & Units ............... 5
Questions? Contact Customer Support at
Placement Guidelines ............. 6
Using the Thermometer........... 7
Troubleshooting ..................... 7
Care & Maintenance.............. 8
Specications......................... 8
FCC Information .................... 8
Customer Support .................. 9
Warranty............................... 9
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
A...CU►RITE®
Features & Benets
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display with Tabletop Stand
2. Outdoor Sensor
3. Instruction Manual
IMPORTANT
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online to receive 1 year warranty protection
www.AcuRite.com
Features & Benets
1
•----
1111
2
3
OUTDOOR SENSOR
1. Integrated Hanger
For easy placement.
2. Wireless Signal Indicator
Flashes when data is being sent to
the display.
3. Battery Compartment Cover
1
2
3
4
--- 39° •::~r 52°----+---
5
tow all-time high
lc':35pm-
6
---+---~ n Of
7
aJ INDOOR
8
9
10
u
••
ii
1'
•
-
• •
ii'
~,!
.S,
m
r
11
12
13
14
15
,u ...
16
FRONT OF DISPLAY
1. Sensor Low Battery Indicator
2. Freeze Alert Indicator
Appears when temperature is below
freezing (32°F; 0°C).
3. Current Outdoor Temperature
Arrow icon indicates direction
temperature is trending.
4. Outdoor Low Temperature Record
Lowest temperature recorded for #5.
5. Record Timespan
Indicates viewing records for today,
last 48 hours, or all-time.
6.
Display Low Battery Indicator
7. Current Indoor Temperature
Arrow icon indicates direction
temperature is trending.
8. Outdoor Sensor Signal Strength
9. Outdoor High Temperature Record
Highest temperature recorded for #5.
10. Clock
BACK OF DISPLAY
11. Integrated Hang Hole
For easy wall mounting.
12. UP Button
For setup preferences.
13. DOWN Button
For setup preferences.
14. SET Button
For setup preferences.
15. Battery Compartment
16. Fold-Out Tabletop Stand
17. Battery Compartment Cover
(not shown)
2
3
SETUP
Install or Replace Batteries
AcuRite recommends high quality alkaline or lithium batteries in the outdoor
sensor for the best product performance. Heavy duty or rechargeable batteries
are not recommended.
The sensor requires lithium batteries in low temperature conditions. Cold
temperatures can cause alkaline batteries to function improperly. Use
lithium batteries in the sensor for
temperatures below -4ºF / -20ºC.
1. Slide off the battery compartment
cover.
2. Insert 2 x AA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram in
the battery compartment.
3. Replace the battery cover.
(700C) 1580F I
ALKALINE
BATTERIES
(700C) 158°F I
Set the Time & Units
Press the “SET” button, located on the back of the display, to enter SET MODE.
Once in set mode, the preference you are currently setting will blink on the
display.
To adjust the currently selected (ashing) item, press and release the “UP” or
“DOWN“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button again to adjust
the next preference. The preference set order is as follows:
CLOCK HOUR
CLOCK MINUTE
TEMPERATURE UNITS (ºF or ºC)
You will automatically exit SET MODE if no buttons are pressed for 30 seconds.
Enter SET mode at any time by pressing the “SET” button.
Display
1. Slide off the battery compartment
-
• • •
SET
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
cover.
2. Insert 2 x AAA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram
in the battery compartment.
3. Replace the battery cover.
4
5