AcuRite 00782W Instruction Manual

Instruction Manual
Wireless Thermometer
model 00782W
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets................. 3
Setup .................................... 4
Install or Replace Batteries...... 4
Set the Time & Units ............... 5
Placement Guidelines ............. 6
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com
Using the Thermometer........... 7
Troubleshooting ..................... 8
Care & Maintenance.............. 9
Specications......................... 9
FCC Information .................... 9
Customer Support .................10
Warranty..............................10
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove.
Package Contents
1. Display unit
2. Outdoor sensor
3. Instruction Manual
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE
Archive~ Products
Register a Product
2
Features & Benets
1
2 3
------'--------i
4
5
------"-------1,:
6 3
4
7 8
~----------
8 y
max min
lOoF
max min
ACU-Rrre.
0
ffC
r
(
SET
L
3S
;AX
DISPLAY UNIT
:._
i-~
in
-+
J
-~
12
11
10
9
II
15
14
,
13
1. Current Outdoor Temperature
2. Outdoor Sensor Low Battery Indicator
3. “max” indicator
Indicates today’s HIGH records are
being viewed.
4. “min” indicator
Indicates today’s LOW records are
being viewed.
5. Clock
6. Current Indoor Temperature
7. “°F/°C” Button
Toggle between °F and °C.
8. “SET” Button
9. “+” Button
10. “MAX/MIN” Button
Press to view the lowest/highest temperatures recorded since midnight.
11. Display Low Battery Indicator
12. Outdoor Sensor Signal Strength
OUTDOOR SENSOR
13. Battery Compartment Cover
14. Wireless Signal Indicator
Flashes when data is being sent to the display unit.
15. Integrated Hanger
For easy placement.
3
SETUP
Install or Replace Batteries
AcuRite recommends high quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not recommended.
The outdoor sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Outdoor Sensor
1. Slide off the battery compartment cover.
2. Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
3. Replace the battery cover.
LITHIUM
BATTERIES
➔-
iP'Jilili?'M
(70°C)
(70°C)
158°F 1580f
Display Unit
1. Slide off the battery compartment cover.
2. Insert 2 x AAA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
3. Replace the battery cover.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
I I
4
Loading...
+ 8 hidden pages