Instruction Manual
Weather Thermometer
models 00754/00771W/00772W/00773W/00774W
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets: Sensor ..... 2
Features & Benets: Display .... 3
Setup .................................... 4
Sensor Setup ......................... 4
Display Setup ........................ 5
Intelli-Time® Clock .................. 6
Set the Time, Date & Units ...... 6
Placement Guidelines ............. 7
Using the Thermometer ........... 8
Troubleshooting ..................... 9
Care & Maintenance .............10
Replace Intelli-Time® battery
Specications ........................10
FCC Information ...................10
Customer Support ................. 11
Warranty..............................11
...10
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display unit
2. Outdoor sensor
3. Instruction Manual
PRODUCT MUST BE REGISTERED
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
TO RECEIVE WARRANTY SERVICE
Register a Product
►
Features & Benets
1
2
3
4
OUTDOOR SENSOR
1. Integrated Hanger
For easy placement.
5
2. Wireless Signal Indicator
Flashes when data is being sent to the
display unit.
3. Battery Compartment
4. A-B-C Switch
ID code that must match display’s A-B-C
switch to ensure units synchronize.
5. Battery Compartment Cover
2
Features & Benets
1
15
14
2
3
4
5
6
7
DISPLAY UNIT
1. Current Outdoor Temperature
Arrow icon indicates the direction the
temperature is trending.
2. Outdoor Sensor Signal Strength
3. Daylight Saving Time Indicator
Shown only during setup.
4. Display Low Battery Indicator
5. Day of the Week
6. Current Indoor Temperature
Arrow icon indicates the direction the
temperature is trending.
7. “▼“ Button
8. “SET“ Button
9. “▲“ Button
10. Date
11. Selected Time Zone
13
12
11
10
9
8
16
17
18
12. Intelli-Time® Clock
13. Outdoor Sensor Low Battery
Indicator
14. Freeze Alert Indicator
Indicates temperature is below
freezing (32°F; 0°C).
15. Integrated Hang Hole
For easy wall mounting.
16. Reset
Full reset to factory default.
17. A-B-C Switch
ID code that must match sensor’s
A-B-C switch to ensure units
synchronize .
18. Battery Compartment
19. Battery Compartment Cover
(Not shown)
3
SETUP
Sensor Setup
Set the A-B-C Switch
1
The A-B-C switch is located inside
the battery compartment. It can
be set to A, B or C. However,
you must select the same letter
choices for both the sensor and
the display unit in order for the
units to synchronize.
Install or Replace Batteries
2
AcuRite recommends high quality
alkaline or lithium batteries for
the best product performance.
Heavy duty or rechargeable
batteries are not recommended.
The sensor requires lithium
batteries in low temperature
conditions. Cold temperatures
can cause alkaline batteries
to function improperly. Use
lithium batteries in the sensor for
temperatures below -4ºF / -20ºC.
1. Slide off the battery
compartment cover. Take
note of the A-B-C switch
setting inside the battery
compartment.
2. Insert 2 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
A-B-C Switch
1
set to match
display unit
A B C
Install Batteries
2
2 AA batteries
4