Acu-Rite 00665DIX User Manual

#00665DIX Digital Instant Read Thermometer

BATTERY REQUIREMENTS: This product requires 1 “AAA” standard alkaline
battery (not included). We do NOT recommend the use of heavy duty or
rechargeable batteries.

INSTALL BATTERY: Locate the slot on the edge of the back cover and
gently pry open to remove the back cover. Insert 1 “AAA” alkaline battery.
Replace the back cover.

AUTO OFF: To conserve battery power, this product will automatically turn
off after one hour of no use or button activity.

USE INSTRUCTIONS:

1. Push the POWER button. Push “ºF/ºC” button to select degree scale.

2. Flip open the probe completely and insert probe into thickest part of meat

or fowl near the end of cooking time. Be sure the probe tip is not touching
bone, gristle, the pan or inserted into hollow cavity of fowl.

3. To obtain accurate temperature reading, wait until numbers stop moving,
approximately 5-10 seconds.

The thermometer will beep when a STABLE temperature is observed:

• Measured temperature must be rising at a rate of +3.3°C or more in 3

seconds

• Beep will only sound when temperature is above 48.8°C

• Temperature reading must be stable within 1.1°C for 2 seconds

• Beep will automatically reset after the temperature falls 8.3°C from high

mark

4. Wash the probe with hot, soapy water after each insertion to prevent

cross-contamination.

CARE INSTRUCTIONS: Wash the probe with hot, soapy water after each use.
The housing and display area are NOT WATERPROOF. DO NOT SUBMERGE
IN WATER OR PLACE IN DISHWASHER. Wipe the housing and display area
with a soft, damp cloth. Use a VERY small amount of dishwashing soap if
necessary to degrease the housing.

051413

www.AcuRite.com

Chaney Instrument Co. • Lake Geneva, WI 53147 • MADE IN CHINA

[phone]