AcuRite 00615 Instruction Manual

Instruction Manual

Weather Center

model 00615

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: 3-in-1 ....... 3

Features: Display Unit ............ 4

Setup .................................... 6

3-in-1 Sensor Setup ................ 6

Display Unit Setup ................. 7

Atomic Clock ......................... 8

Set Time, Date & Units ............ 8

Sensor & Display Placement ... 9

3-in-1 Sensor Installation ........10

Using the Weather Center .....11

Weather Ticker .....................12

Troubleshooting ....................14

Care & Maintenance ............. 16

Specications ........................16

FCC Information ...................16

Customer Support ................. 17

Warranty..............................17

Questions? Contact Customer Support at

[phone] or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.

Package Contents

1. Display unit

2. Tabletop stand

2. 3-in-1 sensor

3. Sensor mounting bracket

4. Mounting hardware

5. Instruction Manual

IMPORTANT

PRODUCT REGISTRATION

Register online

to receive 1 year

warranty protection

www.AcuRite.com

PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE

Register a Product

►

2

Features & Benets

1

4

2

5

3-in-1 SENSOR

1. Temperature & Humidity Sensors

(internal)

2. Release Lever for Battery Access

3. Mounting Point

4. Wind Speed Anemometer

6

3

5. Mounting Hardware

Includes anchors and screws.

6. Mounting Bracket

7. A-B-C Switch (not shown)

ID code that must match display’s
A-B-C switch to ensure units
synchronize.

3

Features & Benets

Display Unit

1
2

3

4
5

6

7

24 23 22 21 20 171819

16

15

14

13

12
11

Back of
Display Unit

8 9 10

25

26

27

4

28
29

30
31

DISPLAY UNIT

1. History Chart Icon
Indicates data is currently displayed on

the History Chart (6).

2. 12 to 24 Hour Weather Forecast

Self-Calibrating Forecasting pulls data

from the outdoor sensor to generate your
personal forecast.

3. Learning Mode Icon

Disappears after weather forecast

self-calibration is complete.

4. Current Indoor Temperature

5. Current Indoor Humidity

6. Multi-Variable History Chart

Displays the past 12 hours of data for
pressure, temperature or wind speed.

7. Weather Ticker™

8. Deactivate Weather Ticker
Message

9. Weather Ticker Manual Cycle

Press to advance through messages.

10. Activate Weather Ticker Message

11. Seasonal

Displays heat index, dew point or

wind chill, depending on the current
outdoor temperature.

12. Outdoor Sensor Signal Strength

13. Current Outdoor Humidity

Arrow icon indicates direction

humidity is trending.

14. Current Outdoor Temperature

Arrow icon indicates direction

temperature is trending.

15. Current Wind Speed

16. History Chart Icon
Indicates data is currently displayed on

the History Chart (6).

17. Selected Time Zone

18. Average Wind Speed
Based on all wind speed readings

from the past 2 minutes.

19. Peak Wind Speed
Highest speed from past 60 minutes

20. Atomic Clock Signal Strength

21. Atomic Clock
Maintains time with split-second

accuracy and automatically updates
for daylight saving time.

22. Barometric Pressure

Arrow icon indicates the direction

the pressure is trending.

23. Display Unit Low Battery Indicator

24. Date

BACK OF DISPLAY UNIT

25. UP, SET & DOWN Buttons

For setup preferences.

26. Reset Button

Full reset to factory defaults.

27. A-B-C Switch

ID code that must match sensor’s A-B-C

switch to ensure units synchronize.

28. Integrated Hang Hole

For easy wall mounting

29. MAX/MIN Button

Press to view high or low records for
temperature and humidity.

30. SCALE Button
Changes data units to either

U.S. units or imperial units.

31. HISTORY Button

Press to toggle between pressure,

temperature and wind speed data
on the History Chart (6).

32. Battery Compartment Cover
(not shown)

5

SETUP

3-IN-1 Sensor Setup

Set the A-B-C Switch

1

The A-B-C switch is located inside
the battery compartment. It can

be set to A, B or C. However,

you must select the same letter

choices for both the sensor and

the display unit in order for the
units to synchronize.

Install or Replace Batteries

2

AcuRite recommends high quality
alkaline or lithium batteries for

the best product performance.

Heavy duty or rechargeable

batteries are not recommended.

The 3-in-1 sensor requires lithium
batteries in low temperature
conditions. Cold temperatures
can cause alkaline batteries to

function improperly. Use lithium
batteries in the 3-in-1 sensor for
temperatures below -4ºF / -20ºC.

1. Press the release lever and
pull off the lower housing of

the sensor.

2. Remove the battery

compartment cover.

3. Insert 4 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery

compartment.

4. Replace the battery cover and
lower housing of the sensor.

A B C

A-B-C Switch

1

set to match
display unit

Install Batteries

2

4 AA batteries

6