Acu-Rite 00608BPDI User Manual

Instruction Manual

Weather Center

models 00608BPDI

Weather

Stations

Temperature

& Humidity

Weather

Alert Radio

Kitchen

Thermometers

& Timers

Clocks

AcuRite offers an extensive assortment of precision instruments,

designed to provide you with information you can depend on to

Plan your day with confidence

.

™

www.AcuRite.com

CONTENTS

Unpacking Instructions............2

Package Contents..................2

Product Registration…......……2

Features & Benefits: 3-in-1.......3

Features: Display Unit.............4

Setup....................................6

3-in-1 Sensor Setup.................6

Display Unit Setup..................7

Atomic Clock.........................8

Set Time, Date & Units............8

Questions? Contact Customer Support at

[phone] or visit www.AcuRite.com.

Sensor & Display Placement...9

3-in-1 Sensor Installation.......10

Using the Weather Center.....11

Troubleshooting…………....…12

Care & Maintenance............14

Calibration..........................15

Specifications......................16

FCC Information...................16

Customer Support…...….......17

Warranty…………........…….17

Printed in China

00608PDI INST 073112

©2012 Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark
of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and
copyrights are the property of their respective owners.
Patent numbers: 5,978,738; 6,076,044; 6,597,990; US 7,637,141 B2.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.

Features & Benefits

Unpacking Instructions

Remove the protective film that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.

Package Contents

1. Display unit with tabletop stand

2. 3-in-1 sensor

3. Sensor mounting bracket

4. Mounting hardware

5. Instruction Manual

IMPORTANT

PRODUCT REGISTRATION

Register online

to receive 1-year

warranty protection

www.AcuRite.com

PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE

Register a Product

4

1

2

6

5

3

3-in-1 SENSOR

1. Temperature & Humidity Sensors

(internal)

2. Release Lever for Battery Access

3. Mounting Point

4. Wind Speed Anemometer

5. Mounting Hardware

Includes anchors and screws.

2

6. Mounting Bracket

7. A-B-C Switch (not shown)

ID code that must match displayʼs

A-B-C switch to ensure units
synchronize.

3

Features & Benefits

Display Unit

43 51 2

22

21

20
19

18

16 1517 14 13

30

29

28

27

6

7
8

9
10

11

12

23 24 25

set

26

DISPLAY UNIT

1. Wireless Sensor Signal Strength

2. Low Sensor Battery Indicator

3. Atomic Clock Signal Strength

4. Atomic Clock

Maintains time with split-second
accuracy and automatically updates
for daylight saving time.

5. Date

6. Peak Wind Speed

Highest speed from past 60 minutes.

7. Current Wind Speed

8. Average Wind Speed

Based on all wind speed readings
from the past 2 minutes.

9. Time Stamp for Last Wind Reading

Updates about every 18 seconds.

10. Learning Mode Icon

Disappears after weather forecast
self-calibration is complete.

11. 12 to 24 Hour Weather Forecast

Self-Calibrating Forecasting pulls data
from the outdoor sensor to generate
your personal forecast.

12. Barometric Pressure

Arrow icon indicates the direction the
pressure is trending.

13. Low Battery Indicator

14. Current Indoor Humidity

15. Auto or Manual Pressure Mode

Indicates pressure mode preference.

Auto Pressure Mode

Pressure will self-calibrate over a 14
day Learning Mode.

Manual Pressure Mode

Indicates the pressure has been
manually calibrated.

16. Current Indoor Temperature

17. Record Highs & Lows Button

View records for temperature and
humidity.

18. Moon Phase

19. Seasonal Select

Select between heat index, dew
point, wind chill.

20. Oncoming Storm Icon

Indicates a large, rapid pressure
drop has been detected.

21. Current Outdoor Humidity

Arrow icon indicates direction
humidity is trending.

22. Current Outdoor Temperature

Arrow icon indicates direction
temperature is trending.

Back of Display Unit

23. Adjust Up Arrow

for setup preferences.

24. SET Button

for setup preferences.

25. Adjust Down Arrow

for setup preferences.

26. Daily / All-Time Records Button

Selects desired records to be viewed
using Records Button (16).

27. Removable Tabletop Stand

28. Battery Compartment

29. A-B-C Switch

ID code that must match sensorʼs

A-B-C switch to ensure units
synchronize.

30. Battery Compartment Cover

4

5

SETUP

3-in-1 Sensor Setup

1

Install or Replace Batteries

Batteries MUST be installed for this
product to operate. AcuRite
recommends high quality alkaline or
lithium batteries for the best product
performance. Heavy duty or
rechargeable batteries are not
recommended.

The 3-in-1 sensor requires lithium
batteries in low temperature
conditions. Cold temperatures can
cause alkaline batteries to function
improperly. Use lithium batteries in the
3-in-1 sensor for temperatures below

-4ºF / -20ºC.

1. Press the release lever and pull off
the lower housing of the sensor.

2. Remove the battery compartment
cover. Take note of the A-B-C switch
setting inside the battery
compartment for step 2.

3. Insert 4 x AA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram in
the battery compartment.

4. Replace the battery cover and
lower housing of the sensor.

2

Set the A-B-C Switch

The A-B-C switch is located inside the
battery compartment. It can be set to
A, B or C. However, you must select
the same letter choices for both the
sensor and the display unit in order
for the units to synchronize.

Display Unit Setup

1

Install or Replace Batteries

1. Remove the battery
compartment cover.

2. Insert 3 x AA alkaline batteries
into the battery compartment,
as shown. Follow the polarity
(+/-) diagram in the battery
compartment.

3. Replace the battery cover.

A-B-C Switch

2

set to match
sensor

A B C

A B C

2

Set the A-B-C Switch

Locate the A-B-C switch inside the
battery compartment. Set the
A-B-C switch to A, B or C. You
must select the same letter choices
for both the display unit and the
sensor in order for the units to
synchronize.

Install Batteries

1

3 AA batteries

A B C

A-B-C Switch

2

set to match
display unit

Install Batteries

1

4 AA batteries

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to

76

Atomic Clock

AcuRite atomic clocks use a radio-controlled signal to synchronize to the
correct time broadcast by the National Institute of Standards and Technology
(NIST) Radio Station WWVB, located near Fort Collins, Colorado. WWVB
broadcasts the current time and date with split-second accuracy.

This AcuRite atomic clock will maintain itself to the correct time, and
automatically adjust itself for daylight saving time to provide the most accurate
timekeeping standard possible.

Please note: The atomic signal generally takes a few hours to synchronize, so it
is important to manually set the time and date after powering on the display.

Set the Time, Date & Units

The clock and calendar are utilized to time stamp history records and other
data, so it is important to set the time and date soon after you power on the
display unit.

Press the “SET” button to enter SET MODE. Once in set mode, the preference
you are currently setting will blink on the display.

To adjust the currently selected (flashing) item, press and release the “ ” or
“ ” buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “SET” button again to adjust
the next preference. The preference set order is as follows:

TIME ZONE (PST MST CST EST AST HAT [HAST] AKT [AKST])
AUTO DST (Automatically adjust time -/+ on DST dates)
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
UNITS: TEMPERATURE (ºF or ºC)
UNITS: WIND SPEED (mph, kph, knots)
UNITS: PRESSURE (inHg or mb)

You will automatically exit SET MODE if no buttons are touched for 30
seconds. Enter basic setup mode at any time by pressing the “SET” button.

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display unit and the sensor are critical to the accuracy
and performance of this product.

Display Unit Placement

Place the display unit in a dry area free of dirt and dust. To
ensure accurate temperature measurement, place out of direct
sunlight and away from heat sources or vents. Display unit stands
upright for tabletop use or is wall-mountable.

3-in-1 Sensor Placement

The 3-in-1 sensor is designed to remain outdoors all year long.
Choose an open location with no obstructions above or around
the sensor for the most accurate measurements.

Important Placement Guidelines

Display unit and sensor must be within 330ft (100m) of each other.

MAXIMIZE WIRELESS RANGE

Place units away from large metallic items, thick walls, metal surfaces, or other
objects that may limit wireless communication.

PREVENT WIRELESS INTERFERENCE

Place both units at least 3ft (.9m) away from electronic devices (TV, computer,
microwave, radio, etc.).

LOCATE AWAY FROM HEAT SOURCES

Position sensor away from heaters, air conditioners, chimneys, exhaust vents,
asphalt and concrete (surfaces that radiate heat).

LOCATE AWAY FROM HUMIDITY SOURCES

Avoid installing the sensor near pools, spas, or other bodies of water. Water
sources may impact humidity accuracy.

LOCATE AWAY FROM SPRINKLER HEADS

DO NOT install the sensor where it will be sprayed by a sprinkler system. This
may force water inside the sensor.

LOCATE AWAY FROM WIND & RAIN OBSTRUCTIONS

DO NOT mount the sensor with obstructions around it.
Consider a location that is a wide open area, with few
structures around to ensure accurate wind speed
measurement.

Visit us online to view installation photos and
video, or learn more about AcuRite technology:

www.AcuRite.com/3in1

98

View Video

OPERATION

3-in-1 Sensor Installation Guidelines

INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) off the

ground (higher is better for wind measurement) in an open area. Secure to

fence post, 2ʼx4ʼ wood, 3/4” pole, etc. (not included)

LEVEL INSTALLATION

Use a bubble level (not included) to ensure level

installation for accurate wind measurement.

Top or Side Mount

Top Mount Side Mount

1. Insert the mounting base into the
hole on the bottom of the sensor.

2. Use one of the screws included in
the hardware bag to fasten the
lower sensor housing to the
mounting base.

3. Make sure the sensor is level using
a bubble level.

4. Fasten mounting base to a post or
railing using 2 screws.

Pole Mount

1. Insert 3/4” schedule 40 PVC (25.8 mm
O.D.) pole (not included) or similar item
all the way into the hole on the bottom of
the sensor. Note: Mounting base not used.

2. Use one of the screws included in the
hardware bag to fasten the lower sensor
housing securely to the pole.

3. Make sure the sensor is level using a

Pole Mount

Do not install during
electrical storms. Do
not place pole or
sensor near
electrical lines or
electrical equipment.

bubble level.

The 3-in-1 sensor is now ready to use.

Basic Setup is Complete

The 3-in-1 sensor will now synchronize with the display unit. It may take a few
minutes for synchronization to complete. If both or one of the units appear to
be functioning improperly, please refer to the troubleshooting section.

Using the Weather Center
Weather Forecast

AcuRiteʼs patented Self-Calibrating Forecasting provides your personal forecast

of weather conditions for the next 12 to 24 hours by collecting data from the
sensor in your backyard. It generates a forecast with pinpoint accuracy ­personalized for your exact location.

EXAMPLE

OF WEATHER

FORECAST

DISPLAY

ICONS

RAIN/SNOW

MIX LIKELY

(flashing=stormy)

RAIN

LIKELY

(flashing=stormy)

SNOW
LIKELY

LIGHT RAIN

LIKELY

LIGHT SNOW

LIKELY

PARTLY
CLOUDY

CLOUDY

CLEARING

MOSTLY
CLOUDY

View the complete list of icons at www.AcuRite.com/acurite-icons

“Learning Mode”

Self-Calibrating Forecasting use a unique algorithm to analyze changes in
pressure and temperature over a time period (called Learning Mode) to
determine your altitude. After 14 days, the Learning Mode icon disappears
from the display screen. At this point, the self-calibrated pressure is tuned in to
your location and the unit is ready for superior weather prediction.

Barometric Pressure

Subtle variations in barometric pressure greatly affect the weather. This
weather center displays the current pressure with an arrow icon to indicate the
direction the pressure is trending (FALLING, STEADY, or RISING).

High & Low Records

The Record Highs & Lows button ( ) displays minimum and maximum
recordings for outdoor and indoor temperature and humidity. To select
between viewing daily (since midnight) or all-time records, slide the switch
located on the back of the display. To reset low records, press and hold the
( ) button while viewing low records. To reset high records, press and hold
the ( ) button while viewing high
records.

Wind Speed

The Wind area of the display features
WIND SPEED PEAK, AVERAGE,
CURRENT WIND SPEED, and a graphic
representation of current wind speed.
There is also a time stamp for the last
wind speed reading.

1110

Troubleshooting

Troubleshooting

Problem Possible Solution

• Relocate the display unit and/or the 3-in-1 sensor.

The units must be within 330ft (100m) of each
other.

• Make sure both units are placed at least 3 feet

(.9m) away from electronics that may interfere
with the wireless communication (such as TVs,
microwaves, computers, etc).

No outdoor sensor

reception

no bars

Outdoor

temperature

is flashing or

showing dashes

• Use standard alkaline batteries (or lithium

batteries in sensor when temperature is below

-4ºF/-20ºC). Do not use heavy duty or
rechargeable batteries. NOTE: It may take up to
20 minutes for display unit and sensor to
synchronize after batteries are replaced.

• Synchronize the units:

1. Bring both the sensor and display unit indoors
and remove at least one battery from each.

2. Reinstall the battery in the outdoor sensor.

3. Reinstall battery into the display unit.

4. Let the units sit within a couple feet of each other
for about 20 minutes to gain a strong connection.

Flashing of the outdoor temperature may be an
indication of wireless interference.

• Make sure the A-B-C switch in the battery

compartments of both the display unit and sensor
are switched to the same letter. You may choose
A, B or C; but both units must match to sync up.

Problem Possible Solution

• Make sure both the display unit and 3-in-1 sensor

are placed out of direct sunlight and away from

Inaccurate

temperature or

humidity

Inaccurate wind

readings

Display screen

not working

any heat sources or vents (see page 11).

• Make sure both units are positioned away from

moisture sources (see page 11).

• Make sure 3-in-1 sensor is mounted at least 5ft off

of the ground.

• Calibrate indoor and outdoor temperature and

humidity (see page 20).

• What is wind reading being compared to? Pro

weather stations are typically mounted at 30ft
high or more. Make sure to compare data using
a sensor positioned at the same mounting height.

• Check location of the sensor. Ensure itʼs mounted

a minimum of 5ft in the air with no obstructions
around it (within several feet).

•Ensure wind cups are spinning freely. If they

hesitate or stop try lubricating with graphite
powder or spray lubricant.

• Check that the batteries are installed correctly.

Batteries may need to be replaced.

• Check that power adaptor is fully plugged in (if

using power adapter for power source).

• Reset the display by pressing the reset button,

located on the back of the display unit. Date and
time will need to be entered after a reset.

Inaccurate forecast

• Weather Forecast icon predicts conditions for the

next 12 to 24 hours, not current conditions.

• Has Learning Mode icon disappeared from the

display unit? Learning Mode must complete
before forecast and pressure will be accurate.

• Allow unit to run continuously for 33 days.

Battery removal or resetting the display unit will
restart Learning Mode. After 14 days, forecast
should be fairly accurate, however Learning
Mode calibrates for a total of 33 days.

If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
[phone] for assistance.

1312

Care & Maintenance

Calibration

Display Unit Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.

3-in-1 Sensor Care

Clean The Sensor

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Insect Prevention

Insects may cause obstructions and interrupt data by nesting in or on the 3-in-1
sensor. To limit this problem, spray sensor with a household insect repellent.
Consult the insect repellent instructions prior to use.

Snow & Freezing Weather

The 3-in-1 sensor will not be damaged by freezing conditions.

Clean the Wind Anemometer

Remove foreign matter from the outside of the sensor for free movement of the
wind anemometer. If needed, use a small amount of clear silicone spray
lubricant or graphite powder on the anemometer for improved movement.

Calibrate Temperature & Humidity

The indoor / outdoor temperature and humidity readings can be calibrated on
the display unit to improve accuracy. Calibration can improve accuracy when
3-in-1 sensor placement or environmental factors impact your data accuracy.

1. Locate the “ ”, “SET”, and “ ” buttons on the back of the display unit.
Press AND HOLD all three buttons for at least 5 seconds.

2. The temperature will begin flashing, indicating it is ready to be calibrated.

3. Press the up or down arrow buttons to calibrate the data value higher or
lower from the actual reading.

4. Press the “SET” button to confirm the calibration adjustment. Note: The “ ”
icon remains illuminated next to calibrated values.

5. The next calibratable data will begin flashing, indicating it is ready to be
calibrated. Repeat Steps 1 - 4 to calibrate additional data.

Calibrate Barometric Pressure

The Weather Center default pressure mode is “AUTO”. In auto mode, the
pressure will calibrate itself over a 14 day Learning Mode. Barometric pressure
can be manually calibrated:

1. Locate the “ ”, “SET”, and “ ” buttons on the back of the display unit.
Press AND HOLD all three buttons for at least 5 seconds.

2. Press the “SET” button to cycle through data until the pressure value begins
flashing.

3. Press the “ ” or “ ” button to select “MANUAL” pressure mode.

4. Press the “SET” button to confirm.

5. Press the “ ” or “ ” buttons to calibrate the pressure value higher or
lower from the self-calibrated reading.

6. Press the “SET” button to confirm the calibration adjustment. Note: The “ ”
icon remains illuminated next to the calibrated value.

1514

Specifications

TEMPERATURE RANGE

HUMIDITY RANGE

WIND SPEED

WIRELESS RANGE

OPERATING FREQUENCY

POWER

DATA REPORTING

Outdoor: -40ºF to 158ºF; -40ºC to 70ºC
Indoor: 32ºF to 122ºF; 0ºC to 50ºC
Outdoor: 1% to 99%
Indoor: 1% to 99%
0 to 99 mph; 0 to 159 kph
330ft / 100m depending on home construction materials
433mhz
7 x AA alkaline or lithium batteries (not included)
Wind Speed: 18 seconds
Outdoor temperature & humidity: 18 sec. updates
Indoor temperature & humidity: 60 sec. updates

Customer Support

AcuRite customer support is committed to providing you with
best-in-class service. For assistance, please have the model number of
this product available and contact us in any of the following ways:

[phone]

[e-mail]

24/7 support at www.AcuRite.com

Installation Videos
Instruction Manuals
Replacement Parts

IMPORTANT

Register your Product
Support User Forum
Submit Feedback & Ideas

PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE

FCC Information

TThis device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, There is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to

this equipment. Such modifications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two confitions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.

PRODUCT REGISTRATION

Register online

to receive 1-year

warranty protection

www.AcuRite.com

Limited One Year Warranty

At AcuRite, we proudly uphold our commitment
to quality technology. Chaney Instrument Co.
warrants that all products it manufactures to be
of good material and workmanship, and to be
free of defects when properly installed and
operated for a period of one year from the
date of purchase.

We recommend that you visit us at
www.AcuRite.com for the fastest way to register
your product. However, product registration
does not eliminate the need to retain your
original proof of purchase in order to obtain
warranty benefits.

Chaney Instrument Co. warrants that all products it manufactures
to be of good material and workmanship, and to be free of defects
when properly installed and operated for a period of one year
from the date of purchase. Remedy for breach of this warranty is
limited to repair or replacement of the defective item(s). Any
product which, under normal use and service, is proven to breach
the warranty contained herein within ONE YEAR from date of sale
will, upon examination by Chaney, and at its sole option, be
repaired or replaced by Chaney. Transportation costs and charges
for returned goods shall be paid for by the purchaser. Chaney
hereby disclaims all responsibility for such transportation costs
and charges. This warranty will not be breached, and Chaney will
give no credit for products it manufactures which have received

Register a Product

normal wear and tear, been damaged (including by acts of
nature), tampered, abused, improperly installed, damaged in
shipping, or repaired or altered by others than authorized
representatives of Chaney.

The above-described warranty is expressly in lieu of all other
warranties, express or implied, and all other warranties are
hereby expressly disclaimed, including without limitation the
implied warranty of merchantability and the implied warranty of
fitness for a particular purpose. Chaney expressly disclaims all
liability for special, consequential or incidental damages, whether
arising in tort or by contract from any breach of this warranty.
Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion
may not apply to you. Chaney further disclaims all liability from
personal injury relating to its products to the extent permitted by
law. By acceptance of any of Chaney’s products, the purchaser
assumes all liability for the consequences arising from their use
or misuse. No person, firm or corporation is authorized to
assume for Chaney any other liability in connection with the sale
of its products. Furthermore, no person, firm or corporation is
authorized to modify or waive the terms of this paragraph, and the
preceding paragraph, unless done in writing and signed by a duly
authorized agent of Chaney. This warranty gives you specific legal
rights, and you may also have other rights which vary from state
to state.

For in-warranty claims:
Chaney Instrument Co. | 965 Wells St. | Lake Geneva, WI 53147

1716