AcuRite 00592W, 00592A Instruction Manual
Instruction Manual
Thermometer
models 00592W / 00592A
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets: Sensor..... 2
Features & Benets: Display.... 3
Setup .................................... 4
Sensor Setup ......................... 4
Display Setup ........................ 5
Intelli-Time® Clock................... 6
Set the Time, Date & Units ...... 6
Placement Guidelines ............. 7
Using the Thermometer........... 8
Troubleshooting ..................... 9
Care & Maintenance.............10
Replace Intelli-Time® Battery ..10
Specications........................10
FCC Information ...................10
Customer Support ................. 11
Warranty..............................11
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display unit with tabletop stand
2. Outdoor Sensor
3. Instruction Manual
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
Features & Benets
1
2
3
4
4
•
LI.
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
Archive:l Products
Register a Product
►
OUTDOOR SENSOR
1. Integrated Hanger
For easy placement.
5
2. Wireless Signal Indicator
Flashes when data is being sent to the
display unit.
3. Battery Compartment
4. A-B-C Switch
ID code that must match display’s A-B-C
switch to ensure units synchronize.
5. Battery Compartment Cover
2
Features & Benets
1
2
3
4
5
6
7
14
13
12
15
16
18
8
9
DISPLAY UNIT FRONT
1. Momentary Backlight Button
2. Current Outdoor Temperature
Arrow icon indicates direction
temperature is trending.
3. Current Outdoor Humidity
4. Date
5. Day of the Week
6. Intelli-Time® Clock
Automatically updates itself for
Daylight Saving Time.
7. Moon Phase
8. Current Indoor Temperature
Arrow icon indicates direction
temperature is trending.
9. “high” Button
Press to display highest temperature
recorded since midnight.
11
10
10. “low” Button
Press to display lowest temperature
recorded since midnight.
11. Current Indoor Humidity
12. Display Low Battery Icon
13. Sensor Signal Strength
14. Sensor Low Battery Icon
DISPLAY UNIT BACK
15. Reset Button
Full reset to factory defaults.
16. A-B-C Switch
ID code that must match sensor’s
A-B-C switch to ensure units synchronize.
17. Intelli-Time Battery
Compartment Cover
18. “Up”, “Set” & “Down” Button
For setup preferences.
17
3
SETUP
Sensor Setup
1
Set the A-B-C Switch
The A-B-C switch is located inside
•
the battery compartment. It can
be set to A, B or C. However,
you must select the same letter
choices for both the sensor and
the display unit in order for the
units to synchronize.
Install or Replace Batteries
2
AcuRite recommends high quality
•
alkaline or lithium batteries in
the outdoor sensor for the best
product performance. Heavy
duty or rechargeable batteries
are not recommended.
The sensor requires lithium
batteries in low temperature
conditions. Cold temperatures
can cause alkaline batteries
to function improperly. Use
lithium batteries in the sensor for
temperatures below -4ºF / -20ºC.
1. Slide off the battery
compartment cover. Take
note of the A-B-C switch
setting inside the battery
compartment for display unit
setup.
2. Insert 2 x AA batteries into
the battery compartment, as
A-B-C Switch
1
set to match
display unit
A B C
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
•
Install Batteries
2
2 AA batteries
s~Jf~~~s It (•Q #•94•
ALKALINE
BATTERIES
4
(70°C) 158°F I
(70°C) 158°F I
Loading...