AcuRite 00318 User Manual

Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.

Window Thermometer

Replace the Battery

1. Gently sq ueeze the tabs located at the bottom of the thermometer to pull out the battery compartment drawer.

Instruction Manual

model 00315

Features & Benets

1. Suction Cup Mount Easily mounted on a window.

2. Current Temperature Displayed in degrees

Celsius.

3. Min/Max

Daily temperature records.

Unpacking Instructions

Remove the protective lm

that is applied to the screen prior to using this product. Peel off to remove.

Power On

This thermometer includes a “CR-2032” battery that is already installed. Remove the plastic insulator tab to activate the battery and thermometer display.

NOTE that the initial temperature reading may be higher than the actual temperature due to the heat from your hands warming up the case

Specications

TEMPERATURE RANGE POWER

-20°C to 70°C 1 x "CR-2032" (included)

Questions? Contact Customer Support at

(877) 221-1252 or visit www.AcuRite.com.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR

the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of

LOCAL LAWS AND REGULATIONS.

the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in ﬁre, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals. Battery contains mercury. Do not put in trash. Recycle or manage as hazardous waste.

BATTERY SAFETY: Follow the polarity (+/-) diagram in

SAVE THIS MANUAL FOR FUTURE REFERENCE.

2. Remove and safely discard the old battery (see disposal safety info included). Insert a new “CR-2032” battery, paying close attention to the polarity markings.

3. Gently insert the battery drawer back into the thermometer.

Placement

For the most accurate temperature readings, place your thermometer in a location that is OUT OF DIRECT SUNLIGHT. This unit can be mounted on a window using the included suction cup. For the best performance, clean the area where you want to adhere the thermometer. Moisten the suction cup and then press it evenly onto the clean surface.

Occasionally, suction cups will not adhere well in very cold temperatures. In this case, it may be necessary to re-apply the suction cup.

MIN/MAX Reset

The MIN/MAX temperature readings will reset every 24 hours. The reset time is based on when the thermometer was powered on. For example, if you power on the thermometer at 4:30 PM on Monday, the MIN/MAX readings will be reset at 4:30 PM Tuesday (24 hours later).

IMPORTANT

PRODUCT MUST BE REGISTERED TO RECEIVE WARRANTY SERVICE

PRODUCT REGISTRATION

to receive 1 year

warranty protection

www.AcuRite.com

►

Limited One Year Warranty

At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase.

We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty beneﬁts.

Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures which have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.

The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including without limitation the implied warranty of merchantability and the implied warranty of ﬁtness for a particular purpose. Chaney expressly disclaims all liability for special, consequential or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of Chaney’s products, the purchaser assumes all liability for the consequences arising from their use or misuse. No person, ﬁrm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products. Furthermore, no person, ﬁrm or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly authorized agent of Chaney. This warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state.

For in-warranty claims: Chaney Instrument Co. | 965 Wells St. | Lake Geneva, WI 53147

Printed in China

00315CADI INST 052113