AcuRite 00275RM Instruction Manual
Instruction Manual
Temperature & Humidity Monitor
model 00275RM
---
CONTENTS
Package Contents .................. 2
Product Registration ............... 2
Features & Benets................. 3
Setup .................................... 4
Placement Guidelines ............. 5
Using the Monitor .................. 6
Add-on Wired Sensors ........... 7
Troubleshooting ..................... 7
Specications......................... 8
FCC Information .................... 8
Customer Support .................. 9
Warranty............................... 9
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Package Contents
1. Temperature & Humidity Monitor
2. Mounting hardware
3. Instruction manual
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
Archive:l Products
Register a Product
►
2
Features & Benets
1
--
FRONT
1. Wireless Signal Indicator
Flashes when data is being
wirelessly transmitted.
4
8
2
3
BACK
2. Sensor Input
Plug-in for additional sensors
(sold separately).
3. Integrated Keyhole
For easy wall mounting.
4. Wired Sensor Retention Slot
Simplifies cord management
when using add-on wired
sensors (sold separately).
5. Monitor ID
Alphanumeric ID used to
identify the Monitor during
system configuration.
6. Reset Button
Resets sensor transmission.
7. Battery Compartment
8. Battery Compartment Cover
9. Mounting Hardware
Includes drywall anchor
and screw.
Item Qty Diameter Length
Screw 1 #6 3/4”
Anchor 1 #6 3/4”
7 6
4
5
4
9
3
SETUP
Monitor Setup
Install or Replace Batteries
1
Batteries MUST be installed for Record the unique 6-digit
• •
this product to operate. AcuRite alphanumeric ID, located on
recommends high quality alkaline the back of the Monitor. This
or lithium batteries for the best unique ID may be referenced for
product performance. Heavy duty connectivity functions.
or rechargeable batteries are not
recommended.
1. Twist off the battery
compartment cover.
2. Insert 2 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
Write Down the Monitor’s ID
2
ID:
Install Batteries
1
2 AA Batteries
Write Down Monitor’s ID
2
6 digit alphanumeric ID
The Monitor requires lithium batteries in low temperature conditions. Cold
temperatures can cause alkaline batteries to function improperly. Use lithium
batteries in the Monitor for temperatures below -4°F / -20°C.
B~~f~~~s
ALKALINE
BATTERIES
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to
4
@I• ij
#•€f■L-.._
__ a_o_oc_>_1_5_8_o_F_I
(JQOC) 158°F I
Loading...