AcuRite 00252W, 00251W User Manual

Instruction Manual

Sportsman’s Forecaster

models 00251W/00252W

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: Sensor ..... 2

Features & Benets: Display .... 3

Setup .................................... 4

Sensor Setup ......................... 4

Display Setup ........................ 4

Intelli-Time® Clock .................. 5

Set the Time, Date & Units ...... 5

Placement Guidelines ............. 6

Using the Forecaster............... 7

Troubleshooting ..................... 8

Care & Maintenance .............10

Replace Intelli-Time® battery ..10

Specications ........................11

FCC Information ................... 11

Customer Support ................. 12

Warranty..............................12

Questions? Contact Customer Support at

[phone] or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.

Package Contents

1. Display unit

2. Outdoor sensor

3. Instruction Manual

PRODUCT MUST BE REGISTERED

IMPORTANT

PRODUCT REGISTRATION

Register online

to receive 1 year

warranty protection

www.AcuRite.com

TO RECEIVE WARRANTY SERVICE

Register a Product

►

Features & Benets

1

2

3

OUTDOOR SENSOR

1. Integrated Hanger
For easy placement.

2. Wireless Signal Indicator

4

Flashes when data is being sent to the

display unit.

3. Battery Compartment

4. Battery Compartment Cover

2

Features & Benets

6

7
8

9

10
11

13

DISPLAY UNIT

6. Hunting or Fishing Activity Meter

Predicts wildlife activity level. Select
hunting, shing, or auto-cycle
between both.

7. Pressure History Graph

Tracks and displays the barometric
pressure history.

8. Barometric Pressure

Arrow icon indicates the direction the

pressure is trending.

9. Intelli-Time® Clock

Sets itself to the correct time and

automatically updates for Daylight
Saving Time.

10. Display Low Battery Indicator

11. Monthly High Temperature Record

12. Current Outdoor Temperature

13. Monthly Low Temperature Record

14

15

16
17

18
19

20

12

21

22

14. Learning Mode Icon

Disappears after weather forecast
self-calibration is complete.

15. 12 to 24 Hour Weather Forecast
Self-Calibrating Forecasting pulls data

from the outdoor sensor to generate

your personal forecast.

16. Moon Phase

17. Intelli-Time® Date
Sets itself to the correct date.

18. Today’s High Temperature Record

19. Wireless Sensor Signal Strength

20. Today’s Low Temperature Record

21. Hunting/Fishing Mode Button

22. Sensor Low Battery Indicator

3

SETUP

Install or Replace Batteries

AcuRite recommends high quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not recommended.

The outdoor sensor requires lithium batteries in low temperature conditions.
Cold temperatures can cause alkaline batteries to function improperly. Use
lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.

Outdoor Sensor

1. Slide off the battery compartment

cover.

2. Insert 2 x AA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram in
the battery compartment.

3. Replace the battery cover.

Display Unit

1. Slide the stand off of the bottom

of the display, as shown.

2. Slide off the battery compartment

cover.

3. Insert 3 x AA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram in
the battery compartment.

4. Replace the battery cover.

5. Replace the stand.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be

4

Intelli-Time® Clock

Intelli-Time products are pre-programmed with the correct time and date.
Intelli-Time technology instructs the time and date to set themselves. All you
need to do is select your Time Zone and Daylight Saving Time preferences. The
clock will then automatically set itself and change for Daylight Saving Time.

Set the Time, Date & Units

Press the “SET” button to enter SET MODE. Once in SET MODE, the
preference you are currently setting will blink on the display.

To adjust the currently selected (ashing) item, press and release the “p” or

“q” buttons (press and HOLD to fast adjust).

To save your adjustments, press and release the “SET” button again to adjust
the next preference. The preference set order is as follows:

TIME ZONE (PST MST CST EST AST HAST AKST)
DST* (Daylight Saving Time ON or OFF)
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
UNITS: TEMPERATURE (ºF or ºC)
UNITS: PRESSURE (inHg or hPa)

You will automatically exit SET MODE if no buttons are pressed for 30 seconds.
Enter SET MODE at any time by pressing the “SET” button.

*DST is set to ON by default. If you live in an area that observes daylight

saving time, DST should remain ON.

5

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display unit and outdoor sensor are critical to the
accuracy and performance of this product.

Display Unit Placement

Place the display unit in a dry area free of dirt and dust.
Display unit stands upright for tabletop use.

Outdoor Sensor Placement

Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant and is designed for general outdoor
use, however, to extend its life place the sensor in an area
protected from direct weather elements.

Hang the sensor using the integrated hang holes or hanger, or
by using string (not included) to hang it from a suitable location,
like a well covered tree branch. The best location is 4 to 8 feet
above the ground with permanent shade and plenty of fresh air
to circulate around the sensor.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct
sunlight and away from any heat sources or vents.

• Display unit and outdoor sensor must be within 165 ft (50 m) of each other.

• To maximize wireless range, place units away from large metallic items, thick
walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (.9 m) away
from electronic devices (TV, computer, microwave, radio, etc.).

165 feet maximum

(50 meters)

Setup is Complete

The sensor will now synchronize with the display unit. It may take a few
minutes for synchronization to complete. Please refer to the troubleshooting
section of this manual if anything appears to be functioning improperly.

6

OPERATION

Using the Sportsman’s Forecaster

Hunting & Fishing Activity Meter

Don’t miss out on favorable weather and wildlife conditions! AcuRite’s Hunting
& Fishing Activity Meter predicts wildlife activity levels by combining weather
observations with lunar positioning data. View the shing meter, the hunting
meter, or automatically cycle between both meters.

The Mode button (shown right), located on the front
of the display, allows you to select the meter mode:

Hunting Activity

Meter Mode

Fishing Activity
Meter Mode

Cycle between hunting
& shing activity meters.
Press AND HOLD Mode
button for 3 seconds.

Learning Mode

Self-Calibrating Forecasting uses a unique algorithm to analyze changes in
pressure over a time period (called Learning Mode) to determine your altitude.
After 14 days, the Learning Mode icon disappears from the display screen. At
this point, the self-calibrated pressure is tuned in to your location and the unit is
ready for superior weather prediction.

Weather Forecast

AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast
of weather conditions for the next 12 to 24 hours by collecting data from
the sensor in your backyard. It generates a forecast with pinpoint accuracy ­personalized for your exact location.

STORMY

& WINDY

(flashing=stormy)

SNOW

LIKELY

SNOW / RAIN

MIX LIKELY

RAIN

LIKELY

MOSTLY
CLOUDY

View the complete list of icons at www.AcuRite.com/acurite-icons

Barometric Pressure

Subtle variations in barometric pressure greatly affect the weather. This
weather forecaster displays the current pressure, trend arrow and a pressure
chart. The chart tracks and displays the change in pressure so you can monitor

the rate of change over time.

7

Moon Phase

Track the phases of the moon, conveyed through simple lunar phase icons:

NEW

WAXING

CRESCENT

1ST

QUARTER

WAXING

GIBBOUS

FULL LAST

WANING
GIBBOUS

QUARTER

WANING

CRESCENT

High & Low Records

“Today” temperature records automatically clear daily at midnight. “Month”
temperature records automatically clear at midnight on the last day of the

month.

• To manually clear the HIGH recorded values, press and HOLD the “ ”
button. Dashes display to conrm you have cleared the HIGH records.

• To manually clear the LOW recorded values, press and HOLD the “ ”
button. Dashes display to conrm you have cleared the LOW records.

Troubleshooting

Problem Possible Solution

If the wireless signal indicator shows no bars:

• Relocate the display unit and/or the outdoor sensor.
The units must be within 165 ft (50 m) of each other.

• Make sure both units are placed at least 3 feet (.9 m)

No outdoor sensor

reception

no bars

away from electronics that may interfere with the
wireless communication (such as TVs, microwaves,
computers, etc).

• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It
may take up to 20 minutes for display unit and sensor
to synchronize after batteries are replaced.

Display screen

not working

• Check that the batteries are installed correctly.
Batteries may need to be replaced.

• Reset the display by pressing the reset button, located
on the back of the display unit. Date and time will
need to be entered after a reset.

8

Troubleshooting

Problem Possible Solution

Outdoor

temperature

is ashing or

showing dashes

Inaccurate forecast

Flashing of the outdoor temperature is generally an
indication of wireless interference.

1. Bring both the sensor and display unit indoors and

remove batteries from each.

2. Reinstall batteries in the outdoor sensor.

3. Reinstall batteries in the display unit.

4. Let the units sit within a couple feet of each other for

about 20 minutes to gain a strong connection.

• Weather Forecast icon predicts conditions for the next
12 to 24 hours, not current conditions.

• Has Learning Mode icon disappeared from the
display unit? Learning Mode must complete before
forecast and pressure will be accurate.

• Allow unit to run continuously for 33 days. Battery
removal or resetting the display unit will restart
Learning Mode. After 14 days, forecast should be
fairly accurate, however Learning Mode calibrates for
a total of 33 days.

Inaccurate

temperature

• Make sure both the display unit and sensor are
placed out of direct sunlight and away from any heat

sources or vents (see page 6).

If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
[phone] for assistance.

9

Care & Maintenance

Display Unit Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Replace Intelli-Time Clock Battery

Intelli-Time technology is
powered by a pre-installed
coin-cell battery that stores

the time and date settings.

The battery has a shelf life of
several years. To replace the
Intelli-Time battery:

1. Locate the coin cell battery

compartment door on the

back of the display unit.

Unscrew and remove the
compartment cover.

Insert

2

CR2032 Battery

CR2032

3V

2. Insert 1 x CR2032 coin

cell battery into the battery
compartment, as shown.
Install battery with “+”
positive terminal facing
OUT.

3. Screw in the battery cover.

Remove

1

Battery Cover

10

Specications

TEMPERATURE RANGE

WIRELESS RANGE
OPERATING FREQUENCY
POWER

Outdoor: -40ºF to 158ºF; -40ºC to 70ºC

165 ft / 50 m depending on home construction materials
433 MHz
Display: 3 x AA alkaline batteries

Sensor: 2 x AA alkaline or lithium batteries

DATA REPORTING

Outdoor Data: 31 second updates
Indoor Data: 30 second updates

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, There is no guarantee that interference will not occur in a particular instal
lation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.
Such modications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.

-

11

Customer Support

AcuRite customer support is committed to providing you with best-in­class service. For assistance, please have the model number of this
product available and contact us in any of the following ways:

[phone] [e-mail]

24/7 support at www.AcuRite.com

► Installation Videos ► Register your Product

► Instruction Manuals ► Support User Forum

► Replacement Parts ► Submit Feedback & Ideas

PRODUCT MUST BE REGISTERED

IMPORTANT

PRODUCT REGISTRATION

Register online

to receive 1 year

warranty protection

www.AcuRite.com

TO RECEIVE WARRANTY SERVICE

Register a Product

►

Limited One Year Warranty

At AcuRite, we proudly uphold our commitment
to quality technology. Chaney Instrument Co.
warrants that all products it manufactures to
be of good material and workmanship, and to
be free of defects when properly installed and
operated for a period of one year from the date

of purchase.

We recommend that you visit us at
www.AcuRite.com for the fastest way to register
your product. However, product registration
does not eliminate the need to retain your
original proof of purchase in order to obtain
warranty benets.

Chaney Instrument Co. warrants that all products it manufactures
to be of good material and workmanship, and to be free of
defects when properly installed and operated for a period of
one year from the date of purchase. Remedy for breach of this
warranty is limited to repair or replacement of the defective
item(s). Any product which, under normal use and service, is
proven to breach the warranty contained herein within ONE
YEAR from date of sale will, upon examination by Chaney,
and at its sole option, be repaired or replaced by Chaney.
Transportation costs and charges for returned goods shall
be paid for by the purchaser. Chaney hereby disclaims all
responsibility for such transportation costs and charges. This

warranty will not be breached, and Chaney will give no credit
for products it manufactures which have received normal wear
and tear, been damaged (including by acts of nature), tampered,
abused, improperly installed, damaged in shipping, or repaired
or altered by others than authorized representatives of Chaney.

The above-described warranty is expressly in lieu of all other
warranties, express or implied, and all other warranties are
hereby expressly disclaimed, including without limitation the
implied warranty of merchantability and the implied warranty
of tness for a particular purpose. Chaney expressly disclaims
all liability for special, consequential or incidental damages,
whether arising in tort or by contract from any breach of this
warranty. Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation
or exclusion may not apply to you. Chaney further disclaims all
liability from personal injury relating to its products to the extent
permitted by law. By acceptance of any of Chaney’s products,
the purchaser assumes all liability for the consequences arising
from their use or misuse. No person, rm or corporation is
authorized to assume for Chaney any other liability in connection
with the sale of its products. Furthermore, no person, rm or
corporation is authorized to modify or waive the terms of this
paragraph, and the preceding paragraph, unless done in writing
and signed by a duly authorized agent of Chaney. This warranty
gives you specic legal rights, and you may also have other
rights which vary from state to state.

For in-warranty claims: Chaney Instrument Co.

965 Wells St., Lake Geneva, WI 53147

12

131415

Weather

Stations

Temperature

& Humidity

Weather

Alert Radio

Kitchen

Thermometers

& Timers

Clocks

It’s more than accurate, it’s

AcuRite offers an extensive assortment of precision instruments,

designed to provide you with information you can depend on to

Plan your day with condence

.

™

www.AcuRite.com

Printed in China

00251W INST 120213

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark

of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and

copyrights are the property of their respective owners. AcuRite uses patented

technology. Visit www.AcuRite.com/patents for details.