Use these links (and links throughout this manual) to navigate through this reference.
For a printed owner's manual, click on authorized manuals or go to www.helminc.com.
Owner's Identification Form
Introduction ..................................................................................................................................................... i
A Few Words About Safety ..........................................................................................................................ii
Important Handling Information .............................................................................................................iii
Your Vehicle at a Glance...............................................................................................................................2
Driver and Passenger Safety .......................................................................................................................5
Proper use and care of your vehicle's seat belts, and Supplemental Restraint System.
Instruments and Controls...........................................................................................................................59
Instrument panel indicator and gauge, and how to use dashboard and steering column controls.
Comfort and Convenience Features.......................................................................................................121
How to operate the climate control system, the audio system, and other convenience features.
Before Driving ...............................................................................................................................
What gasoline to use, how to break-in your new vehicle, and how to load luggage and other cargo.
Index................................................................................................................................................................... I
Service Information Summary
A summary of information you need when you pull up to the fuel pump.
Contents
..............193
Page 2
Owner’s Identification
Main Menu
OWNER
ADDRESS
STREET
CITYSTATE/PROVINCEZIP CODE/
V. I. N.
DELIVERY DATE
(Date sold to original retail purchaser)
DEALER NAMEDEALER NO.
ADDRESS
STREET
CITYSTATE/PROVINCEZIP CODE/
OWNER’S SIGNATURE
DEALER’S SIGNATURE
POSTAL CODE
POSTAL CODE
This Owner’s Manual should be considered
a permanent part of the vehicle, and should
remain with the vehicle when it is sold.
This Owner’s Manual covers all models of
theMDX.Youmayfinddescriptionsof
equipment and features that are not on your
particular model.
The information and specifications included
in this publication were in effect at the time
of approval for printing. Honda Motor Co.,
Ltd. reserves the right, however, to
discontinue or change specifications or
design at any time without notice and
without incurring any obligation whatsoever.
POUR CLIENTS CANADIEN
AVIS IMPORTANT: Si vous avez
besoin d’un Manuel du Conducteur
en français, veuillez demander à
votreconcessionnairede
commander le numéro de pièce
33S3VC10
Page 3
Introduction
Main Menu
Congratulations! Your selection of a 2002 Acura MDX was a wise investment.
It will give you years of driving pleasure.
One of the best ways to enhance the enjoyment of your new Acura is to read
this manual. In it, you will learn how to operate its driving controls and
convenience items. Afterwards, keep this owner’s manual in your vehicle so
youcanrefertoitatanytime.
Several warranties protect your new Acura. Read the warranty booklet
thoroughly so you understand the coverages and are aware of your rights
and responsibilities.
Maintaining your vehicle according to the schedules given in this manual
helps to keep your driving trouble-free while it preserves your investment.
When your vehicle needs maintenance, keep in mind that your Acura dealer’s
staff is specially trained in servicing the many systems unique to your Acura.
Your Acura dealer is dedicated to your satisfaction and will be pleased to
answer any questions and concerns.
California Proposition 65 Warning
WARNING:
California to cause cancer and birth defects or other reproductive harm.
This product contains or emits chemicals known to the State of
As you read this manual, you will
find information that is preceded by
asymbol. This
information is intended to help you
avoid damage to your Acura, other
property, or the environment.
i
Page 4
AFewWordsAboutSafety
Main Menu
Your safety, and the safety of others,
is very important. And operating this
vehicle safely is an important
responsibility.
To help you make informed
decisions about safety, we have
provided operating procedures and
other information on labels and in
this manual. This information alerts
you to potential hazards that could
hurt you or others.
Of course, it is not practical or
possible to warn you about all the
hazards associated with operating or
maintaining your vehicle. You must
use your own good judgement.
ii
You will find this important safety information in a variety of forms,
including:
Safety Labels
Safety Messages
three signal words:,, or.
These signal words mean:
Safety Headings
Safety Precautions.
Safety Section
Instructions
This entire book is filled with important safety informationplease read it
carefully.
−
on the vehicle.
−
preceded by a safety alert symboland one of
DANGER WARNINGCAUTION
You WILL be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
You CAN be KILLED or SERIOUSLY
HURT if you don’t follow instructions.
You CAN be HURT if you don’t follow
instructions.
−
such as Important Safety Reminders or Important
−
such as Driver and Passenger Safety.
−
how to use this vehicle correctly and safely.
−
Page 5
Important Handling Information
Main Menu
Your MDX has higher ground clearance than a passenger vehicle designed for use only on pavement. Higher ground
clearance has many advantages for off-highway driving. It allows you to travel over bumps, obstacles, and rough
terrain. It also provides good visibility so you can anticipate problems earlier.
These advantages come at some cost. Because your vehicle is taller and rides higher off the ground, it has a high
center of gravity. This means your vehicle can tip or roll over if you make abrupt turns. Utility vehicles have a
significantly higher rollover rate than other types of vehicles. In a rollover crash, an unbelted person is significantly
more likely to die than a person wearing a seat belt. As a reminder, make sure you and your passengers always wear
seat belts.
For information on how to reduce the risk of rollover, read ‘‘Driving Guidelines’’ on pageof this manual and the
Off-Highway Guidelines
accident.
section on page. Failure to operate this vehicle correctly may result in loss of control or an
This section gives you important
information about how to protect
yourself and your passengers. It
shows you how to use seat belts
properly. It explains your Supplemental Restraint System. And it tells
you how to properly restrain infants
and children in your vehicle.
You’ll find many safety
recommendations throughout this
section, and throughout this manual.
Therecommendationsonthispage
are the ones we consider to be the
most important.
Always Wear Your Seat Belt
A seat belt is your best protection in
all types of collisions. Airbags
supplement seat belts, but airbags
are designed to inflate only in a
moderate to severe frontal collision.
So even though your vehicle is
equipped with airbags, make sure
you and your passengers always
wear your seat belts, and wear them
properly. (See page.)15
Restrain All Children
Children are safest when they are
properly restrained in a back seat,
notthefrontseat.Achildwhoistoo
smallforaseatbeltmustbeproperly
restrained in a child safety seat. (See
page.)
21
6
Driver and Passenger Safety
Be Aware of Airbag HazardsControl Your Speed
While airbags can save lives, they
can cause serious or fatal injuries to
occupants who sit too close to them,
or are not properly restrained.
Infants, young children, and short
adults are at the greatest risk. Be
sure to follow all instructions and
warnings in this manual. (See page
.)
9
Excessive speed is a major factor in
crash injuries and deaths. Generally,
the higher the speed the greater the
risk, but serious accidents can also
occur at lower speeds. Never drive
faster than is safe for current
conditions, regardless of the
maximum speed posted.
Keep Your Vehicle in Safe
Don’t Drink and Drive
Alcohol and driving don’t mix. Even
one drink can reduce your ability to
respond to changing conditions, and
your reaction time gets worse with
every additional drink. So don’t drink
and drive, and don’t let your friends
drink and drive, either.
Condition
Having a tire blowout or a
mechanical failure can be extremely
hazardous. To reduce the possibility
of such problems, check your tire
pressures and condition frequently,
and perform all regularly scheduled
maintenance. (See page.)
Your vehicle is equipped with many
features that work together to
protect you and your passengers
during a crash.
Some safety features do not require
anyactiononyourpart.These
include a strong steel framework
that forms a safety cage around the
passenger compartment; front and
rear crush zones that are designed to
crumple and absorb energy during a
crash; a collapsible steering column;
and seat belt tensioners that
automatically tighten the front seat
belts in the event of a crash.
These safety features are designed
to reduce the severity of injuries in a
crash. However, you and your
passengers can’t take full advantage
of these safety features unless you
remain sitting in a proper position
alwayswear your seat belts
and
properly.
features can contribute to injuries if
they are not used properly.
In fact, some safety
Driver and Passenger Safety
7
Page 12
Your Vehicle’s Safety Features
Main Menu
Table of Contents
Seat Belts
Foryoursafety,andthesafetyof
your passengers, your vehicle is
equipped with seat belts in all seating
positions.
Your seat belt system also
includes a light on the
instrument panel to remind you and
your passengers to fasten your seat
belts.
Why Wear Seat Belts
Seat belts are the single most
effectivesafetydeviceforadultsand
larger children. (Infants and smaller
children must be properly restrained
in child seats.)
Not wearing a seat belt properly
increases the chance of serious
injury or death in a crash, even
though your vehicle has airbags.
8
Driver and Passenger Safety
In addition, most states and all
Canadian provinces require you to
wear seat belts.
Not wearing a seat belt properly
increases the chance of serious
injury or death in a crash, even
if you have airbags.
Be sure you and your
passengers always wear seat
belts and wear them properly.
When properly worn, seat belts:
Keep you connected to the vehicle
so you can take advantage of the
vehicle’s built-in safety features.
Help protect you in almost every
type of crash, including frontal,
side, and rear impacts and
rollovers.
Help keep you from being thrown
against the inside of the vehicle
and against other occupants.
Keep you from being thrown out
of the vehicle.
Help keep you in a good position
should the airbags ever deploy. A
good position reduces the risk of
injury from an inflating airbag, and
allows you to get the best
advantage from the airbag.
Of course, seat belts cannot
completely protect you in every
crash.Butinmostcases,seatbelts
can reduce your risk of serious
injury.
What you should do:
Always wear
your seat belt, and make sure you
wear it properly.
Page 13
Your Vehicle’s Safety Features
Main Menu
Table of Contents
Airbags
Your vehicle has a Supplemental
Restraint System (SRS) with front
airbags to help protect the heads and
chests of the driver and a front seat
passenger during a moderate to
severe frontal collision.
Your vehicle also has side airbags to
help protect the upper torso of the
driver or a front seat passenger
during a moderate to severe side
impact.
The most important things you need
to know about your airbags are:
Airbags do not replace seat belts.
They are designed to supplement
the seat belts.
Airbags offer no protection in rear
impacts, rollovers, or minor
frontal or side collisions.
Airbags can pose serious hazards.
To do their job, airbags must
inflate with tremendous force and
speed. So while airbags help save
lives, they can cause minor injuries,
or more serious or even fatal
injuries if occupants are not
properly restrained or sitting
properly.
What you should do:
Always wear
your seat belt properly, and sit
upright and as far back as possible
from the steering wheel or
dashboard.
Driver and Passenger Safety
9
Page 14
Your Vehicle’s Safety Features
Main Menu
Table of Contents
Seats & Seat-Backs
Your vehicle’s seats are designed to
keep you in a comfortable, upright
position so you can take full
advantage of the protection offered
by seat belts and the energy
absorbing materials in the seats.
How you adjust your seats and seatbacks can also affect your safety. For
example, sitting too close tothe
steering wheel or dashboard
increases the risk of you or your
passenger being injured by striking
theinsideofthevehicle,orbyan
inflating airbag.
Reclining a seat-back too far reduces
the seat belt’s effectiveness and
increases the chance that the seat’s
occupant will slide under the seat
belt in a crash and be seriously
injured.
10
Driver and Passenger Safety
What you should do:
Move the front
seats as far back as possible, and
keep adjustable seat-backs in an
upright position whenever the
vehicle is moving.
Head Restraints
Head restraints can help protect you
from whiplash and other injuries. For
maximum protection, the back of
your head should rest against the
center of the head restraint.
Door Locks
Keeping your doors locked reduces
thechanceofbeingthrownoutof
the vehicle during a crash. It also
helps prevent occupants from
accidentally opening a door and
falling out, and outsiders from
unexpectedly opening your doors.
Page 15
Your Vehicle’s Safety Features
Main Menu
Table of Contents
Pre-Drive Safety Checklist
To make sure you and your
passengers get the maximum
protection from your vehicle’s safety
features, check the following each
time before you drive away:
All adults, and children who have
outgrown child safety seats, are
wearing their seat belts and
wearingthemproperly(seepage
).
15
Any infant or small child is
properly restrained in a child seat
in a back seat (see page).
22
Frontseatoccupantsaresitting
upright and as far back as possible
from the steering wheel and
dashboard (see page).
12
Seat-backs are upright (see page
).
13
Head restraints are properly
adjusted (see page).
14
Alldoorsandthetailgateare
closed and locked (see page).
12
All cargo is properly stored or
secured (see page).
203
The rest of this section gives more
detailed information about how you
can maximize your safety.
Remember, however, that no safety
system can prevent all injuries or
deaths that can occur in severe
crashes, even when seat belts are
properly worn and the airbags deploy.
Driver and Passenger Safety
11
Page 16
Protecting Adults
Main Menu
Table of Contents
IntroductionAdjust the Front Seats
2.
The following pages provide
instructions on how to properly
protect the driver and other adult
occupants.
Your vehicle has a door and tailgate
These instructions also apply to
children who have outgrown child
seats and are large enough to wear
lap/shoulder belts. (See pagefor
38
monitor light on the instrument
panel to indicate when a specific
door or the tailgate is not tightly
closed.
important additional guidelines on
how to properly protect larger
children.)
For safety, locking the doors reduces
the chance that a passenger,
especially a child, will open a door
Close and Lock the Doors1.
After everyone has entered the
vehicle, be sure the doors and
tailgate are closed and locked.
while the vehicle is moving and
accidentally fall out. It also reduces
the chance of someone being thrown
out of the vehicle during a crash.
Any driver who sits too close to the
steering wheel is at risk of being
seriously injured or killed by striking
the steering wheel or from being
struck by an inflating front airbag
For security, locked doors can
during a crash.
prevent an outsider from
unexpectedly opening a door when
you come to a stop.
See pagefor how to lock the
82
doors.
12
Driver and Passenger Safety
Page 17
Protecting Adults
Main Menu
Table of Contents
To reduce the chance of injury, wear
your seat belt properly, sit upright
with your back against the seat, and
movetheseatawayfromthe
steering wheel to the farthest
distance that allows you to maintain
full control of the vehicle. Also make
sure your front seat passenger
moves the seat as far to the rear as
possible.
The National Highway Traffic Safety
Administration and Transport
Canada recommend that drivers
adjust the seat so the center of the
chest is at least 10 inches (25 cm)
away from the center of the steering
wheel.Alsomakesureyourfront
seat passenger moves the seat as far
to the rear as possible.
Sitting too close to a front
airbag can result in serious
injury or death if the front
airbags inflate.
Always sit as far back from the
front airbags as possible.
Most shorter drivers can get far
enough away from the steering
wheel and still reach the pedals.
However, if you are concerned about
sitting too close, we recommend that
you investigate whether some type
of adaptive equipment may help.
Once your seat is adjusted correctly,
rock it back and forth to make sure
the seat is locked in position.
See pagefor how to adjust the
90
front seats.
Adjust the Seat-Backs3.
Adjust the driver’s seat-back to a
comfortable, upright position,
leaving ample space between your
chest and the airbag cover in the
center of the steering wheel. If you
sit too close to the steering wheel,
you could be injured if the front
airbag inflates.
CONTINUED
Driver and Passenger Safety
13
Page 18
Protecting Adults
Main Menu
Table of Contents
A front passenger should also adjust
the seat-back to an upright position,
but as far from the dashboard as
possible. A passenger who sits too
close to the dashboard could be
injured if the airbag inflates.
Reclining a seat-back so that the
shoulder part of the belt no longer
rests against the occupant’s chest
reduces the protective capability of
the belt. It also increases the chance
of sliding under the belt in a crash
and being seriously injured. The
farther a seat-back is reclined, the
greater the risk of injury.
14
Driver and Passenger Safety
Reclining the seat-back too far
can result in serious injury or
death in a crash.
Adjusttheseat-backtoan
upright position and sit well
back in the seat.
See pagefor how to adjust seat-
91
backs.
Adjust the Head Restraints4.
Before driving, make sure everyone
with an adjustable head restraint has
properly positioned the head
restraint. The restraint should be
positioned so the back of the
occupant’s head rests against the
center of the restraint. A taller
person should adjust the restraint as
high as possible.
Page 19
Improperly positioning head
Main Menu
Table of Contents
restraints reduces their
effectiveness and you can be
seriously injured in a crash.
Make sure head restraints are
in place and positioned properly
before driving.
Properly adjusted head restraints
will help protect occupants from
whiplash and other crash injuries.
See pagefor how to adjust the
head restraints.
Fasten and Position the Seat
5.
Belts
Insert the latch plate into the buckle,
then tug on the belt to make sure the
belt is securely latched. Also check
that the belt is not twisted, because a
twisted belt can cause serious
injuries in a crash.
In the second row center seat and
thethirdrowseats,besurethe
detachable anchors are also latched
(see page).
98
Check that the seat belt is not
twisted, because a twisted belt can
cause serious injuries in a crash.94
Protecting Adults
Position the lap part of the belt as
low as possible across your hips,
then pull up on the shoulder part of
thebeltsothelappartfitssnugly.
This lets your strong pelvic bones
take the force of a crash and reduces
the chance of internal injuries.
CONTINUED
Driver and Passenger Safety
15
Page 20
Protecting Adults
Main Menu
Table of Contents
If necessary, pull up on the belt again
to remove any slack from the
shoulder part, then check that the
belt rests across the center of your
chest and over your shoulder. This
spreads the forces of a crash over
the strongest bones in your upper
body.
Improperly positioning the seat
belts can cause serious injury
or death in a crash.
Make sure all seat belts are
properly positioned before
driving.
16
Driver and Passenger Safety
If the seat belt touches or crosses
your neck, or if it crosses your arm
instead of your shoulder, you need to
adjust the seat belt anchor height.
RREELLEEAASSEE
BBUUTTTTOONN
To adjust the height of a front seat
belt anchor, squeeze the two release
buttons and slide the anchor up or
down as needed (it has four
positions).
Page 21
Never place the shoulder portion of a
Main Menu
Table of Contents
lap/shoulder belt under your arm or
behind your back.
This could cause
very serious injuries in a crash.
If a seat belt does not seem to work
as it should, it may not protect the
occupant in a crash.
sit in a seat with an inoperative seat
belt.
Anyone using a seat belt that is
No one should
not working properly can be
seriously injured or killed. Have your
Acura dealer check the belt as soon
as possible.
Protecting Adults
See pagefor additional
46
information about your seat belt
system and how to take care of your
belts.
Driver and Passenger Safety
17
Page 22
Protecting Adults
Main Menu
Table of Contents
Adjust the Steering WheelMaintain a Proper Sitting
6.7.
Position
After all occupants have adjusted
their seats and put on seat belts, it is
very important that they continue to
sit upright, well back in their seats,
with their feet on the floor, until the
vehicle is parked and the engine is
off.
Sitting improperly can increase the
chance of injury during a crash. For
example, if an occupant slouches,
lies down, turns sideways, sits
Adjust the steering wheel, if needed,
so that the wheel points toward your
chest, not toward your face.
forward, leans forward or sideways,
or puts one or both feet up, the
chance of injury during a crash is
greatly increased.
Pointing the steering wheel toward
your chest provides optimal
protection from the airbag.
See pagefor how to adjust the
78
steering wheel.
18
Driver and Passenger Safety
In addition, an occupant who is out of
position in the front seat can be
seriously or fatally injured by
striking interior parts of the vehicle,
or by being struck by an inflating
front airbag. Being struck by an
inflating side airbag can result in
possibly serious injuries.
Sitting improperly or out of
position can result in serious
injury or death in a crash.
Always sit upright, well back in
the seat, with your feet on the
floor.
Remember, to get the best
protection from your vehicle’s
airbags and other safety features,
you must sit properly and wear your
seat belt properly.
Page 23
Protecting Adults
Main Menu
Table of Contents
Advice for Pregnant WomenAdditional Safety Precautions
Pregnant women should also sit
upright and as far back as possible
from the steering wheel or
dashboard. This will reduce the risk
of injuries to both the mother and
her unborn child that can be caused
by a crash or an inflating airbag.
Each time you have a check-up, ask
your doctor if it’s okay for you to
drive.
Never let passengers ride in the
cargo area or on top of a foldeddown back seat.
All passengers
must sit in locked, upright seats
andbeproperlyrestrainedbyseat
belts.
Passengers should not stand up or
change seats while the vehicle is
moving.
A passenger who is not
wearing a seat belt during a crash
or emergency stop can be thrown
against the inside of the vehicle,
Because protecting the mother is the
best way to protect her unborn child,
against other occupants, or out of
the vehicle.
a pregnant woman should always
wear a seat belt whenever she drives
or rides in a vehicle.
Two people should never use the
same seat belt.
If they do, they
could be very seriously injured in a
Remember to keep the lap portion of
crash.
the belt as low as possible across
your hips.
CONTINUED
Driver and Passenger Safety
19
Page 24
Protecting Adults
Main Menu
Table of Contents
Do not put any accessories on seat
belts.
Devices intended to improve
occupant comfort or reposition the
shoulder part of a seat belt can
severely compromise the
protective capability of the seat
belt and increase the chance of
serious injury in a crash.
Do not place hard or sharp objects
between yourself and a front
airbag.
Carrying hard or sharp
objects on your lap, or driving with
a pipe or other sharp object in
your mouth, can result in injuries
if your front airbag inflates.
20
Driver and Passenger Safety
Keep your hands and arms away
from the airbag covers.
If your
hands or arms are close to the
airbag covers in the center of the
steering wheel and on top of the
dashboard, they could be injured if
the airbags inflate.
Do not attach or place objects on
the front airbag covers.
Any object
attached to or placed on the covers
marked ‘‘SRS AIRBAG’’ in the
center of the steering wheel and
on top of the dashboard could
interfere with the proper operation
of the airbags. Or, if the airbags
inflate, the objects could be
propelled inside the car and hurt
someone.
Do not attach hard objects on or
near a front door.
If a side airbag
inflates,acupholderorotherhard
object attached on or near the
door could be propelled inside the
car and hurt someone.
Page 25
Protecting Children
Main Menu
Table of Contents
AllChildrenMust Be Restrained
Each year, many children are injured
Children who are unrestrained
or improperly restrained can be
seriously injured or killed in a
crash.
Any child too small for a seat
belt should be properly
restrained in a child seat. A
larger child should be properly
restrained with a seat belt.
Children depend on adults to protect
them. However, despite their best
intentions, many parents and other
adults may not know how to
properly
protect young passengers.(See page
So if you have children, or if you ever
need to drive with a grandchild or
other children in your vehicle, be
sure to read this section.
or killed in vehicle crashes because
they are either unrestrained or not
properly restrained. In fact, vehicle
accidents are the number one cause
of death of children ages 12 and
under.
To reduce the number of child
deaths and injuries, every state and
Canadian province requires that
infants and children be restrained
whenever they ride in a vehicle.
Anychildwhoistoosmalltoweara
seat belt should be properly
restrained in a child seat.
.)
26
A larger child should always be
restrained with a seat belt.
.)
38
(See page
Driver and Passenger Safety
21
Page 26
Protecting Children
Main Menu
Table of Contents
Additional Precautions to Parents
Neverholdaninfantorchildon
your lap.
If you are not wearing a
seat belt in a crash, you could be
thrown forward into the
dashboard and crush the child.
Ifyouarewearingaseatbelt,the
child can be torn from your arms
during a crash. For example, if
your vehicle crashes into a parked
vehicleat30mph(48km/h),a
20-lb (9 kg) infant will become a
600-lb (275 kg) force, and you will
not be able to hold on.
Never put a seat belt over yourself
and an infant or child.
crash, the belt could press deep
into the child and cause very
serious injuries.
22
Driver and Passenger Safety
Children Should Sit in the Back
Seat
According to accident statistics,
children of all ages and sizes are
safer when they are restrained in the
back seat, not the front seat. The
National Highway Traffic Safety
Administration and Transport
Canada recommend that all children
ages 12 and under be properly
restrained in a back seat.
In a back seat, children are less
likely to be injured by striking hard
interior parts during a collision or
hard braking. Also, children cannot
be injured by an inflating airbag
when they ride in the back.During a
Page 27
Protecting Children
Main Menu
Table of Contents
The Passenger’s Front Airbag
Poses Serious Risks to Children
Front airbags have been designed to
help protect adults in a moderate to
severe frontal collision. To do this,
the passenger’s front airbag is quite
large, and it inflates with tremendous
speed.
Infants
Never put a rear-f acing child seat in
the front seat of a vehicle equipped
with a passenger’s front airbag.
If
the airbag inflates, it can hit the back
of the child seat with enough force
to kill or very seriously injure an
infant.
Small Children
Placing a forward-facing child seat in
the front seat of a vehicle equipped
with a passenger’s front airbag can
be hazardous.
If the vehicle seat is
too far forward, or the child’s head is
thrown forward during a collision, an
inflating front airbag can strike the
child with enough force to kill or
very seriously injure a small child.
Larger Children
Children who have outgrown child
seats are also at risk of being injured
or killed by an inflating passenger’s
front airbag.
Whenever possible,
larger children should sit in the back
seat, properly restrained with a seat
belt. (See pagefor important
38
information about protecting larger
children.)
Driver and Passenger Safety
23
Page 28
Protecting Children
Main Menu
Table of Contents
U.S. ModelsCanadian Models
To remind you of the passenger’s
front airbag hazards, and that
children must be properly restrained
in a back seat, your vehicle has
warninglabelsonthedashboardand
on the driver’s and front passenger’s
visors. Please read and follow the
instructions on these labels.
To remind you of the front airbag
hazards, your vehicle has warning
labels on the driver’s and front
passenger’s visors. Please read and
follow the instructions on these
labels.
24
Driver and Passenger Safety
Page 29
Protecting Children
Main Menu
Table of Contents
If You Must Drive with Several
Children
Your vehicle has two rows of back
seats where children can be properly
restrained.
If you ever have to carry a group of
children (when carpooling for
example), and a child must ride in
front:
Place the largest child in the front
seat, provided the child is large
enough to wear a seat belt
properly (see page).
38
Move the vehicle seat as far to the
rear as possible (see page).
12
Have the child sit upright and well
backintheseat(seepage).
18
Make sure the seat belt is properly
positioned and secured (see page
).
15
Attention
Many parents say they prefer to put
an infant or small child in the front
passenger seat so they can watch the
child, or because the child requires
attention.
Placing a child in the front seat
exposes the child to hazards from
the passenger’s front airbag, and
paying close attention to a child
distracts the driver from the
important tasks of driving, placing
both of you at risk.
If a child requires physical attention
or frequent visual contact, we
strongly recommend that another
adult ride with the child in a back
seat. The back seat is far safer for a
child than the front.
Additional Safety PrecautionsIf a Child Requires Close
Use childproof door locks to
prevent children from opening the
doors.
Using this feature will
prevent children from opening the
doors and accidentally falling out
(see page).
Use the main power window
switch to prevent children from
opening the rear windows.
88
Using
this feature will prevent children
from playing with the windows,
which could expose them to
hazards or distract the driver (see
page).
100
CONTINUED
Driver and Passenger Safety
25
Page 30
Protecting Children
Main Menu
Table of Contents
Do not leave children alone in your
vehicle.
Leaving children without
adult supervision is illegal in most
states and Canadian provinces,
and can be very hazardous. For
example, infants and small
childrenleftinavehicleonahot
day can die from heatstroke. And
children left alone with the key in
the ignition can accidentally set
the vehicle in motion, possibly
injuring themselves or others.
26
Driver and Passenger Safety
General Guidelines for Using
Child Seats
The following pages give general
guidelines for selecting and installing
child seats for infants and small
children.
Selecting a Child Seat
To provide proper protection, a child
seat should meet three
requirements:
The child seat should meet safety
1.
standards.
The child seat should
meet Federal Motor Vehicle
Safety Standard 213 (FMVSS 213)
or Canadian Motor Vehicle Safety
Standard 213 (CMVSS 213). Look
for the manufacturer’s statement
of compliance on the box and seat.
The child seat should be of the
2.
proper type and size to fit the child.
Infants:
Childrenuptoaboutone
year old should be restrained in a
rear-facing, reclining child seat. Only
a rear-facing seat provides the
proper support to protect an infant’s
head, neck, and back. See page
foradditionalinformation on
30
protecting infants.
Page 31
Small Children:
Main Menu
Table of Contents
A child who is too
large for a rear-facing child seat, and
who can sit up without support,
should be restrained in a forwardfacing child seat. See pagefor
35
additional information on protecting
small children.
The child seat should fit the
3.
vehicle seating position (or
positions) where it will be used.
Due to variations in the design of
child seats, vehicle seats, and seat
belts, all child seats will not fit all
vehicle seating positions.
However, Acura is confident that one
or more child seat models can fit and
be properly installed in all
recommended seating positions in
your vehicle.
Before purchasing a child seat, we
recommend that parents test the
child seat in the specific vehicle
seating position (or positions) where
they intend to use the seat. If a
previously purchased child seat does
not fit, you may need to buy a
different one that will fit.
Protecting Children
Driver and Passenger Safety
27
Page 32
Protecting Children
Main Menu
Table of Contents
Placing a Child SeatFront Passenger’s Seat
This page briefly summarizes Acura’s
recommendations on where to place
rear-facing and forward-facing child
seats in your vehicle.
Airbags Pose Serious
Risks to Children
The passenger’s front airbag
inflates with enough force to kill
or seriously injure an infant in a
rear-facing child seat.
A small child in a forward-facing
child seat is also at risk. If the
vehicle seat is too far forward,
or the child’s head is thrown
forward during a collision, an
inflating airbag can kill or
seriously injure the child.
If a small child must ride in the
front, follow the instructions
provided in this section.
Infants:
Never in the front seat, due
to the front airbag hazard.
Small children:
Not recommended,
due to the front airbag hazard. If a
small child must ride in front,
move the vehicle seat to the rearmost position and secure a frontfacing child seat with the seat belt
(see page).
Back Seats
Infants:
36
Recommended positions.
Properlysecurearear-facingchild
seat (see page).
Small children:
31
Recommended
positions. Properly secure a frontfacing child seat (see page).
36
28
Driver and Passenger Safety
Page 33
Protecting Children
Main Menu
Table of Contents
Installing a Child SeatSecure the child in the child seat.
After selecting a proper child seat,
and a good position to install the seat,
there are three main steps in
installing the seat:
To provide security during normal
driving maneuvers as well as during
a collision, we recommend that
parents secure a child seat as firmly
as possible.
3.
Make sure the child is properly
strappedinthechildseat
according to the child seat maker’s
instructions. A child who is not
properly secured in a child seat
Properly secure the child seat to
1.
thevehicle.
All child seats are
designed to be secured to the
vehicle with the lap part of a lap/
shoulder belt. Some child seats
can be secured to the vehicle’s
LATCH anchorage system instead.
A child whose seat is not properly
secured to the vehicle can be
endangered in a crash. See pages
,andfor instructions on
314436
howtoproperlysecurechildseats
in this vehicle.
However, a child seat does not need
to be ‘‘rock solid.’’ In some vehicles
or seating positions, it may be
difficult to install a child seat so that
it does not move at all. Some side-toside or back-and-forth movement can
be expected and should not reduce
the child seat’s effectiveness.
If the child seat is not secure, try
installing it in a different seating
position, or use a different style of
child seat that can be firmly secured
canbethrownoutoftheseatina
crash and be seriously injured.
Storing a Child Seat
When you are not using a child seat,
either remove it and store it in a safe
place, or make sure it is properly
secured. An unsecured child seat can
be thrown around the vehicle during
a crash or sudden stop and injure
someone.
in the desired seating position.
Make sure the child seat is firmly
2.
secured.
After installing a child
seat, push and pull the seat
forward and from side to side to
verify that it is secure.
Driver and Passenger Safety
29
Page 34
Protecting Children
Main Menu
Table of Contents
Protecting Infants
Child Seat Type
Only a rear-facing child seat provides
proper support for a baby’s head,
neck, and back. Infants up to about
one year of age must be restrained in
a rear-facing child seat.
Two types of seats may be used: a
seat designed exclusively for infants,
or a convertible seat used in the rearfacing, reclining mode.
30
Driver and Passenger Safety
Placing a rear-facing child seat
in the front seat can result in
serious injury or death if the
passenger’s front airbag inflates.
Always place a rear-facing child
seat in the back seat, not the
front.
We recommend that an infant be
restrained in a rear-facing child seat
until the infant reaches the seat
maker’s weight or height limit and is
able to sit up without support.
Rear-Facing Child Seat Placement
In this vehicle, a rear-facing child
seatcanbeplacedinanyseating
positioninabackseat,butnotinthe
front seat.
Never put a rear-f acing child seat in
thefront seat.
If the passenger’s
front airbag inflates, it can hit the
back of the child seat with enough
force to kill or seriously injure an
infant. If an infant must be closely
watched, we recommend that
another adult sit in the back seat
with the baby.
Do not put a rear-facing child seat in
a forward-facing position.
If placed
facing forward, an infant could be
very seriously injured during a
frontal collision.
Page 35
Installing a Rear-Facing Child Seat
Main Menu
Table of Contents
with a Lap/Shoulder Belt
The lap/shoulder belts in the back
seats have a locking mechanism that
must be activated to secure a child
seat.
The following pages provide
instructions on how to secure a rearfacing child seat with this type of
seat belt.
If you have a child seat designed
to attach to the vehicle’s LATCH
anchorage system, follow the
instructions on page.
Before installing a child seat in the
1.
44
center seat of the second row or
either of the third row seats, make
sure the seat belt detachable
anchor is latched (see page).
98
With the child seat in the desired
2.3.
back seating position, route the
belt through the child seat
according to the seat maker’s
instructions, then insert the latch
plate into the buckle.
Protecting Children
To activate the lockable retractor,
slowly pull the shoulder part of the
belt all the way out until it stops,
then let the belt feed back into the
retractor (you might hear a
clicking noise as the belt retracts).
CONTINUED
Driver and Passenger Safety
31
Page 36
Protecting Children
Main Menu
Table of Contents
After the belt has retracted, tug on
4.
it. If the belt is locked, you will not
be able to pull it out. If you can pull
the belt out, it is not locked and
you will need to repeat these steps.
32
Driver and Passenger Safety
After confirming that the belt is
5.6.
locked, grab the shoulder part of
the belt near the buckle and pull
up to remove any slack from the
lap part of the belt. Remember, if
the lap part of the belt is not tight,
the child seat will not be secure.
To remove slack, it may help to
putweightonthechildseat,or
push on the back of the seat, while
pulling up on the belt.
Push and pull the child seat
forward and from side to side to
verify that it is secure enough to
stay upright during normal driving
maneuvers. If the child seat is not
secure, unlatch the belt, allow it to
retract fully, then repeat these
steps.
Page 37
To deactivate the locking
Main Menu
Table of Contents
mechanism and remove a child seat,
unlatch the buckle, unroute the seat
belt, and let the belt fully retract.
Protecting Children
Driver and Passenger Safety
33
Page 38
Protecting Children
Main Menu
Table of Contents
Rear-Facing Child Seat Installation
Tips
Forproperprotection,aninfantmust
ride in a reclined, or semi-reclined
position. To determine the proper
reclining angle, check with the baby’s
doctor or follow the seat maker’s
recommendations.
To achieve the desired reclining
angle, it may help to put a rolled up
towel under the toe of the child seat,
as shown.
34
Driver and Passenger Safety
When properly installed, a rearfacing child seat may prevent the
driver or a front-seat passenger from
moving the seat as far back as
recommended (see page). Or it
12
may prevent them from locking the
seat-back in the desired upright
position (see page).
13
In either case, we recommend that
you place the child seat in another
back seating position, or leave the
affected seat unoccupied. If the
problem cannot be solved, you may
wish to get a smaller rear-facing
child seat.
Page 39
Protecting Children
Main Menu
Table of Contents
Protecting Small Children
Child Seat Type
A child who can sit up without
support, and who fits within the child
seat maker’s weight and height
limits, should be restrained in a
forward-facing, upright child seat.
Of the different seats available, we
recommend those that have a fivepoint harness system as shown.
child stay in the child seat as long as
possible, until the child reaches the
weight or height limit for the seat.
Child Seat Placement
In this vehicle, the best place to
install a forward-facing child seat is
in one of the seating positions in a
back seat.We also recommend that a small
Placing a forward-facing child seat in
the front seat of a vehicle equipped
with a passenger’s front airbag can
be hazardous.
If the vehicle seat is
too far forward, or the child’s head is
thrown forward during a collision, an
inflating front airbag can strike the
child with enough force to cause
very serious or fatal injuries. If a
small child must be closely watched,
we recommend that another adult sit
in the back seat with the child.
CONTINUED
Driver and Passenger Safety
35
Page 40
Protecting Children
Main Menu
Table of Contents
Improperly placing a forwardfacing child seat in the front
seat can result in serious injury
or death if the front airbags
inflate.
Installing a Child Seat with a Lap/
Shoulder Belt
The lap/shoulder belts in the outer
back and front passenger seating
positions have a locking mechanism
that must be activated to secure a
child seat.
Ifyoumustplaceaforwardfacing child seat in front, move
the vehicle seat as far back as
possible and properly restrain
the child.
If it is necessary to put a forwardfacing child seat in the front, move
the vehicle seat as far to the rear as
possible, be sure the child seat is
firmly secured to the vehicle, and the
child is properly strapped in the seat.
36
Driver and Passenger Safety
The following pages provide
instructions on how to secure a
forward-facing child seat with this
type of seat belt.
If you have a child seat designed
to attach to the vehicle’s
LATCH anchorage system,
follow the instructions on page
.
44
Before installing a child seat in the
1.
center seat of the second row or
either of the third row seats, make
sure the seat belt detachable
anchor is latched (see page).
98
With the child seat in the desired
2.
seating position, route the belt
through the child seat according
to the seat maker’s instructions,
then insert the latch plate into the
buckle.
Page 41
Protecting Children
Main Menu
Table of Contents
To activate the lockable retractor,
3.
slowly pull the shoulder part of the
belt all the way out until it stops,
then let the belt feed back into the
retractor (you might hear a
clicking noise as the belt retracts).
After the belt has retracted, tug on
4.
it. If the belt is locked, you will not
be able to pull it out. If you can pull
the belt out, it is not locked and
you will need to repeat these steps.
After confirming that the belt is
5.6.
locked, grab the shoulder part of
the belt near the buckle and pull
up to remove any slack from the
lap part of the belt. Remember, if
the lap part of the belt is not tight,
the child seat will not be secure. It
mayhelptoputweightonthe
child seat, or push on the back of
the seat, while pulling up on the
belt.
Push and pull the child seat
forward and from side to side to
verify that it is secure enough to
stay upright during normal driving
maneuvers. If the child seat is not
secure, unlatch the belt, allow it to
retract fully, then repeat these
steps.
CONTINUED
Driver and Passenger Safety
37
Page 42
Protecting Children
Main Menu
Table of Contents
To deactivate the locking
mechanism in order to remove a
child seat, unlatch the buckle,
unroute the seat belt, and let the belt
fully retract.
38
Driver and Passenger Safety
Protecting Larger Children
When a child reaches the
recommended weight or height limit
fora forward-facingchild seat, the
child should sit in the back seat and
wear a lap/shoulder belt.
If a child is too short for the shoulder
part of the belt to properly fit, we
recommend that the child use a
booster seat until the child is tall
enough to use the seat belt without a
booster.
The following pages give
instructions on how to check proper
seat belt fit, what kind of booster
seat to use if one is needed, and
important precautions for a child
who must sit in the front seat.
Allowing a larger child to sit
improperly in the front seat can
result in injury or death if the
passenger’s front airbag inflates.
If a larger child must sit in front,
make sure the child moves the
seat as far back as possible
and wears the seat belt properly.
Page 43
Protecting Children
Main Menu
Table of Contents
Checking Seat Belt Fit
To determine if a lap/shoulder belt
properly fits a child, have the child
put on the seat belt. Follow the
instructions on page. Then check
15
how the belt fits.
If the shoulder part of the belt rests
over the child’s collarbone and
against the center of the chest, as
shown, the child is large enough to
wear the seat belt.
However, if the belt touches or
crosses the child’s neck, the child
needs to use a booster seat.
Do not let a child wear a seat belt
across the neck.
This could result in
serious neck injuries during a crash.
Do not let a child put the shoulder
part of a seat belt behind the back or
under the arm.
This could cause
very serious injuries during a crash.
It also increases the chance that the
child will slide under the belt in a
crash and be injured.
Do not put any accessories on a seat
belt.
Devices intended to improve
occupant comfort or reposition the
shoulder part of a seat belt, severely
compromise the protective capability
of the seat belt and increase the
chance of serious injury in a crash.
Two children should never use the
same seat belt.
If they do, they could
be very seriously injured in a crash.
CONTINUED
Driver and Passenger Safety
39
Page 44
Protecting Children
Main Menu
Table of Contents
Using a Booster Seat
If a child needs a booster seat, we
recommend choosing a style that
allows the child to use the lap/
shoulder belt directly, without a
shield, as shown.
Whichever style you select, follow
the booster seat maker’s instructions.
40
Driver and Passenger Safety
A child may continue using a booster
seat until the tops of the ears are
even with the top of the seat-back. A
child of this height should be tall
enough to use the lap/shoulder belt
without a booster.
When Can a Larger Child Sit in Front
The National Highway Traffic Safety
Administration and Transport
Canada recommend that all children
ages 12 and under be properly
restrained in a back seat.
The back seat is the safest place for
a child of any age or size.
In addition, the passenger’s front
airbag poses serious risks to children.
If the seat is too far forward, or the
child’s head is thrown forward
during a collision, or the child is
unrestrained or out of position, an
inflating front airbag can kill or
seriously injure the child.
The side airbag also poses risks. If
any part of a larger child’s body is in
the path of a deploying airbag, the
child could receive possibly serious
injuries.
Of course, children vary widely. And
while age may be one indicator of
when a child can safely ride in the
front, there are other important
factors you should consider.
Page 45
Protecting Children
Main Menu
Table of Contents
Physical Size
Physically, a child must be large
enough for the lap/shoulder belt to
properly fit over the hips, chest, and
shoulder (see pagesand). If
1539
the seat belt does not fit properly,
the child should not sit in the front.
Maturity
To safely ride in front, a child must
be able to follow the rules, including
sitting properly and wearing the seat
belt properly throughout a ride.
If you decide that a child can safely
ride up front, be sure to:
Carefully read the owner’s manual
and make sure you understand all
seat belt instructions and all safety
information.
Move the vehicle seat to the rearmost position.
Have the child sit up straight, back
against the seat, and feet on or
near the floor.
Check that the child’s seat belt is
properly positioned and secured.
Supervise the child. Even mature
children sometimes need to be
reminded to fasten the seat belts
or sit properly.
Driver and Passenger Safety
41
Page 46
Protecting Children
Main Menu
Table of Contents
Using Child Seats with Tethers
Your vehicle has attachment points
for a tether-style child seat to be
installed on the second or third row
as shown.
Since a tether can provide additional
security, we recommend using a
tether whenever one is required or
available.
42
Driver and Passenger Safety
Second Seat Installation:Third Seat Installation:
TTEETTHHEERR AANNCCHHOORRAAGGEE PPOOIINNTT
Each second row seat has a tether
anchorage point behind the seat
back.
There are two anchorage points on
the tailgate sill. Select the anchorage
point you want to use, and remove
the cover with a small flat-tipped
screwdriver or fingernail file.
Page 47
Protecting Children
Main Menu
Table of Contents
Lift the head restraint, then route
the tether strap over the seat-back
between the legs of the head
restraint.
Attach the tether strap hook to the
tether attachment point and tighten
the strap according to the child seat
maker’s instructions. Make sure the
strap is not twisted.
Driver and Passenger Safety
43
Page 48
Protecting Children
Main Menu
Table of Contents
Using LATCH
LLOOWWEERR
AANNCCHHOORRSS
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for Children) at the second
row seats. The lower anchors are
located between the seat-back and
seat bottom and are only to be used
with a child seat designed for use
with LATCH.
44
Driver and Passenger Safety
The exact location of each lower
anchorage is marked with a small
circle above the lower anchorage
point.
To install a LATCH-compatible child
seat:
Move the seat belt buckle or seat
1.
belt tongue away from the lower
anchors.
Make sure there are no foreign
2.
objects around the anchors.
Foreign objects could get in the
way of a secure connection
between the child seat and the
anchors.
RRIIGGIIDD TTYYPPEE
Put the child seat in a second row
3.
vehicle seat and attach the child
seat to the lower anchors
according to the child seat maker’s
instructions.
Page 49
FFLLEEXXIIBBLLEE TTYYPPEE
Main Menu
Table of Contents
Protecting Children
Follow the child seat maker’s
4.5.
instructions for any additional
advice on adjusting or tightening
the fit.
Attach the tether strap hook to the
tether anchorage point and tighten
the strap according to the child
seat maker’s instructions. Make
sure the strap is not twisted.
Push and pull the child seat
6.
forward and from side to side to
verify that it is secure enough to
stay upright during normal driving
maneuvers.
Driver and Passenger Safety
45
Page 50
Additional Information About Your Seat Belts
Main Menu
Table of Contents
Seat Belt System ComponentsLap/Shoulder Belt
Your seat belt system includes lap/
shoulder belts in all seven seating
positions. The front seat belts are
also equipped with automatic seat
belt tensioners.
The seat belt system also
includes a light on the
instrument panel to remind you and
your passengers to fasten your belts.
If the driver’s seat belt is not
fastened before the ignitionis turned
ON (II), the light will come on and a
beeper will also sound. The beeper
will stop after a few seconds, but the
light will stay on until the driver’s
seat belt is fastened.
The lap/shoulder belts in the center
seat of the second row and both of
the third row seats are equipped with
a detachable anchor that has two
parts: a small latch plate and a
buckle.
The detachable anchor should
normally be latched whenever the
seats-backs are in an upright position.
For more information about the
detachable anchors, see page.
46
Driver and Passenger Safety
The lap/shoulder belts goes over
your shoulder, across your chest,
and across your hips.
98
Page 51
Additional Information About Your Seat Belts
Main Menu
Table of Contents
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckle is
latched.
To unlock the belt, push the red
PRESSbuttononthebuckle.
The seat belts in all seating positions
except the driver’s have an additional
locking mechanism that must be
activated to secure a child seat. (See
pagesandfor instructions on
3136
how to secure child seats with this
type of seat belt.)
Guide the belt across your body so
that it retracts completely. After
exiting the vehicle, be sure the belt
is out of the way and will not get
closed in the door.
If the shoulder part of the belt is
pulled all the way out, the locking
mechanism will activate. The belt
will retract, but it will not allow the
passenger to move freely.
All seat belts have an emergency
locking retractor. In normal driving,
the retractor lets you move freely in
your seat while it keeps some
tension on the belt. During a collision
or sudden stop, the retractor
To deactivate the locking
mechanism, unlatch the buckle and
let the seat belt fully retract. To
refasten the belt, pull it out only as
far as needed.
automatically locks the belt to help
restrain your body.15
See pagefor instructions on how
to wear the lap/shoulder belt
properly.
Driver and Passenger Safety
47
Page 52
Additional Information About Your Seat Belts
Main Menu
Table of Contents
Automatic Seat Belt Tensioners
Your Acura has automatic seat belt
tensioners for added protection
during a moderate to severe frontal
collision.
48
Driver and Passenger Safety
If your airbags inflate, the tensioners
immediately tighten the front seat
belts to help hold the occupants in
place. The belts will remain tight
until you unbuckle them in the
normal way.
The SRS indicator light will
come on if there is a
problem with your automatic seat
belt tensioners (see page).
53
Page 53
Additional Information About Your Seat Belts
Main Menu
Table of Contents
Seat Belt Maintenance
For safety, you should check the
condition of your seat belts regularly.
Pull each belt out fully and look for
frays, cuts, burns, and wear. Check
that the latches work smoothly and
that the lap/shoulder belts retract
easily. Any belt not in good condition
or not working properly will not
provide good protection and should
be replaced as soon as possible.
U.S. Models
Acura provides a lifetime warranty
on seat belts. Acura will repair or
replace any seat belt component that
fails to function properly during
normal use. Please see your
Warranty Information
booklet for
Acura
details.
Not checking or maintaining
seat belts can result in serious
injury or death if the seat belts
do not work properly when
needed.
Check your seat belts regularly
and have any problem
corrected as soon as possible.
If a seat belt is worn during a crash,
it must be replaced by the dealer. A
belt that has been worn during a
crash may not provide the same level
of protection in a subsequent crash.
The dealer should also inspect the
anchors for damage and replace
them if needed.
Automatic seat belt tensioners that
deployed during a crash must be
replaced.
For information on how to clean your
seat belts, see page.
Driver and Passenger Safety
309
49
Page 54
Additional Information About Your Airbags
Main Menu
Table of Contents
SRS ComponentsHow Your Front Airbags Work
ignition is ON (II).
Your Supplemental Restraint System
(SRS) includes:
An indicator light on the
instrument panel that alerts you to
Two front airbags. The driver’s
airbag is stored in the center of
a possible problem with the
system (see page).
53
the steering wheel; the front
passenger’sairbagisstoredinthe
dashboard. Both are marked ‘‘SRS
AIRBAG.’’
Emergency backup power in case
your vehicle’s electrical system is
disconnected in a crash.
Automatic seat belt tensioners
that tighten the front seat belts in
the event of a moderate to severe
frontal collision (see page).
48
If you ever have a moderate to
severe frontal collision, the sensors
Sensors that can detect a
moderate to severe frontal
collision.
will detect the vehicle’s rapid
deceleration. If the rate of
deceleration is high enough, the
control unit will instantly inflate the
A sophisticated electronic system
front airbags.
that continually monitors and
records information about the
sensors, the control unit, the
airbag activators, and driver and
passenger seat belt use when the
50
Driver and Passenger Safety
Page 55
Additional Information About Your Airbags
Main Menu
Table of Contents
During a frontal crash, your seat
belts help restrain your lower body
and torso. Your airbag provides a
cushion to help restrain and protect
your head and chest.
Since both airbags use the same
sensors, both airbags normally
inflate at the same time. However, it
is possible for only one airbag to
inflate.
This can occur when the severity of
a collision is at the margin, or
threshold, that determines whether
or not the airbags will deploy. In
such cases, the seat belt will provide
sufficient protection, and the
supplemental protection offered by
the airbag would be minimal.
After inflating, the front airbags
immediately deflate, so they won’t
interfere with the driver’s visibility,
or the ability to steer or operate
other controls.
The total time for inflation and
deflation is approximately one-tenth
of a second, so fast that most
occupants are not aware that the
airbags deployed until they see them
lying in their laps.
After a crash, you may see what
looks like smoke. This is actually
powder from the airbag’s surface.
Although the powder is not harmful,
people with respiratory problems
mayexperiencesometemporary
discomfort. If this occurs, get out of
the vehicle as soon as it is safe to do
so.
U.S. Owners
For additional information on how
your airbags work, see the booklet
SRS: What You Need to Know
titled
About Airbags
that came with your
owner’s manual.
Canadian Owners
For additional information on how
your airbags work, ask your dealer
for a copy of the booklet titled
What You Need to Know About Airbags
Driver and Passenger Safety
SRS:
51
.
Page 56
Additional Information About Your Airbags
Main Menu
Table of Contents
How Your Side Airbags Work
Your vehicle is equipped with side
airbags for the driver and a front
seat passenger. The airbags are
stored in the outer edges of the front
seat-backs, and both are marked
‘‘SIDE AIRBAG.’’
52
Driver and Passenger Safety
If you ever have a moderate to
severe side impact, the sensors will
detect rapid deceleration and signal
the control unit to instantly inflate
either the driver’s or the passenger’s
side airbag.
Only one airbag will deploy during a
side impact. If the impact is on the
passenger’s side, the passenger’s
side airbag will deploy even if there
is no passenger.
To get the best protection from the
side airbags, front seat occupants
should wear their seat belts and sit
upright and well back in their seats.
Page 57
Additional Information About Your Airbags
Main Menu
Table of Contents
How the SRS Indicator Light
Works
The SRS indicator light
alerts you to a potential
problem with your front airbags and
automatic seat belt tensioners.
This light will also alert you to a
potential problem with your side
airbags or passenger’s side airbag
automatic cutoff system (see page
).54
When you turn the ignition ON (II),
this indicator will light briefly then
go out. This tells you that the system
is working properly.
If the light comes on at any other
time, or does not come on at all, you
should have the system checked by
your dealer. For example:
If the SRS indicator light does not
come on after you turnthe ignition
ON (II).
If the light stays on after the
engine starts.
If the light comes on or flashes on
andoffwhileyoudrive.
If you see any of these indications,
your front or side airbags may not
deploy, your passenger’s side airbag
automatic cutoff system may not
work properly, or your seat belt
tensioners may not work when you
need them. See your Acura dealer as
soon as possible.
Ignoring the SRS indicator light
can result in serious injury or
death if the airbags, cutoff
system, or tensioners do not
work properly.
Have your vehicle checked by a
dealer as soon as possible if
the SRS light alerts you to a
potential problem.
Driver and Passenger Safety
53
Page 58
Additional Information About Your Airbags
Main Menu
Table of Contents
How the Side Airbag Cutoff
Indicator Light Works
This light alerts you that
the passenger’s side airbag
has been automatically shut off.
It does not mean there is a problem
with your side airbags. It means that
thesideairbagcutoffsystemhas
activated to prevent the side airbag
from deploying.
To reduce the risk of injury from an
inflating side airbag, your vehicle has
an automatic cutoff system for the
passenger’s side airbag.
Although Acura does not encourage
children to ride in the front, this
system is designed to shut off the
side airbag if a child leans sideways
and the child’s head is in the side
airbag deployment path.
54
Driver and Passenger Safety
If a small-statured adult leans
sideways, or larger adult slouches
and leans sideways into the
deployment path of the side airbag,
the system may also shut off the side
airbag.
If the side airbag cutoff indicator
light comes on, you should have the
passenger sit upright. Once the
passenger is out of the deployment
path of the side airbag, the system
will turn the airbag back on and the
light will go out.
A front seat passenger should not
use a cushion or other object as a
backrest. It may prevent the cutoff
system from working properly.
When you turn the ignition ON (II),
the indicator should light briefly and
goout(seepage).Ifitdoesn’t
62
light, stays on, or comes on while
driving without a passenger in the
front seat, have the system checked.
Page 59
Additional Information About Your Airbags
Main Menu
Table of Contents
Airbag ServiceAdditional Safety Precautions
Your front and side airbag systems
are virtually maintenance-free, and
there are no parts you can safely
service. However, you must have
Donotattempttodeactivateyour
airbags.
Together, airbags and
seat belts provide the best
protection.
your vehicle serviced if:
Do not tamper with airbag
Your airbags ever inflate.
Any
airbag that has deployed must be
replaced along with the control
unit, automatic seat belt
components or wiring for any
reason.
Tampering could cause
the airbags to deploy, possibly
causing very serious injury.
tensioners, and other related parts.
Do not try to remove or replace
anyairbagbyyourself.Thismust
be done by a Honda dealer or a
knowledgeable body shop.
Do not expose the front seat-backs
to water.
If rain or spilled water
soaks into a seat-back, it can
prevent the side airbag system
from working properly.
The SRS indicator light alerts you
to a problem.
Take your vehicle to
an authorized Acura dealer as
soon as possible. If you ignore this
indication, the airbags might not
inflate when you need them.
Do not cover or replace front seatback covers without consulting an
Acuradealer.
Improperly
replacing or covering front seatback covers can prevent your side
airbags from inflating during a
collision.
See pagefor further information
202
and precautions relating to your
airbags.
Driver and Passenger Safety
55
Page 60
Carbon Monoxide Hazard
Main Menu
Table of Contents
Your vehicle’s exhaust contains
carbon monoxide gas. You should
have no problem with carbon
monoxide entering the vehicle in
normal driving if you maintain your
vehicle properly.
Have the exhaust system inspected
for leaks whenever:
The vehicle is raised for an oil
change.
You notice a change in the sound
of the exhaust.
The vehicle was in an accident
that may have damaged the underside.
56
Driver and Passenger Safety
Carbon monoxide gas is toxic.
Breathing it can cause
unconsciousness and even kill
you.
Avoid any enclosed areas or
activities that expose you to
carbon monoxide.
High levels of carbon monoxide can
collect rapidly in enclosed areas,
such as a garage. Do not run the
engine with the garage door closed.
Even with the door open, run the
engine only long enough to move the
vehicle out of the garage.
With the tailgate open, air flow can
pull exhaust gas into your vehicle’s
interior and create a hazardous
condition. If you must drive with the
tailgate open, open all the windows
and set the heating and cooling
system/climate control system as
shown below.
If you must sit in your parked vehicle,
even in an unconfined area, with the
engine running, adjust the heating
and cooling system/climate control
system as follows:
Select the Fresh Air mode.
1.
Select themode.
2.
Turn the fan on high speed.
3.
Set the temperature control to a
4.
comfortable setting.
Page 61
Safety Labels
Main Menu
Table of Contents
These labels are in the locations
shown. They warn you of potential
hazards that could cause serious
injury. Read these labels carefully.
If a label comes off or becomes hard
to read, contact your Acura dealer
for a replacement.
HOOD
RADIATOR CAP
BATTERY LABEL
DASHBOARD
U.S. models onlyU.S. models
SUN VISOR
Canadian models
Driver and Passenger Safety
57
Page 62
58
Main Menu
Page 63
Instruments and Controls
Main Menu
This section gives information about
the controls and displays that
contribute to the daily operation of
your Acura. All the essential controls
are within easy reach.
The instrument panel has many
indicators to give you important
information about your vehicle.This indicator lights when you turn
See page.
Malfunction Indicator
Lamp
329
Supplemental Restraint
System Indicator
the ignition switch ON (II). If it
Seat Belt Reminder Light
This indicator lights when you turn
the ignition switch ON (II). It is a
reminder to you and your passengers
to protect yourselves by fastening
the seat belts. A beeper also sounds
if you have not fastened your seat
belt.
The engine can be severely damaged
if this light flashes or stays on when
the engine is running. For complete
information, see page.
Low Oil Pressure
Indicator
327
Charging System
Indicator
comes on at any other time, it
indicates a potential problem with
your front airbags. This light will
also alert you to a potential problem
with your side airbags, passenger’s
side airbag automatic cutoff system
or automatic seat belt tensioners.
For complete information, see page
.
53
If this light comes on when the
If you do not fasten your seat belt,
the beeper will stop after a few
seconds but the light stays on until
you do. Both the light and the beeper
stay off if you fasten your seat belt
before turning on the ignition.
engine is running, the battery is not
being charged. For complete
information, see page.
328
This indicator lights when you turn
the ignition switch ON (II). If it
comes on at any other time, it
indicates that the passenger’s side
Side Airbag Cutoff
Indicator
airbag has automatically shut off.
For complete information, see page
.
54
62
Instruments and Controls
Page 67
Indicator Lights
Main Menu
Table of Contents
U.S.CanadaCanadaU.S.
Parking Brake and Brake System
Indicator
This light has two functions:
Anti-lock Brake System
(ABS) Indicator
This light normally comes on for a
few seconds when you turn the
This indicator comes on when you
1.
turn the ignition switch ON (II). It
is a reminder to check the parking
brake. Driving with the parking
brake not fully released can
damage the brakes and tires.
ignition switch ON (II), and when
the ignition switch is turned to
START (III). If this light comes on at
any other time, there is a problem in
theABS.Ifthishappens,takethe
vehicle to your dealer to have it
checked. With the light on, your
If the indicator remains lit after
2.
you have fully released the
parking brake while the engine is
vehicle still has normal braking
ability but no anti-lock. For complete
information, see page.
running, or if it comes on while
driving, it can indicate a problem
in the brake system. For complete
information, see page.
331
221
Immobilizer System
Indicator
This indicator comes on for a few
seconds when you turn the ignition
switch ON (II). It will then go off if
you have inserted a properly-coded
ignition key. If it is not a properlycoded key, the indicator will blink
and the engine will not start (see
page).
80
This indicator also blinks several
times when you turn the ignition
switch from ON (II) to ACCESSORY
(I) or LOCK (0).
Instruments and Controls
63
Page 68
Indicator Lights
Main Menu
Table of Contents
Turn Signal and
Hazard Warning
Indicators
The left or right turn signal light
blinks when you signal a lane change
or turn. If the light does not blink or
blinks rapidly, it usually means one
of the turn signal bulbs is burned out
(see page). Replace the bulb as
296
soon as possible, since other drivers
cannot see that you are signalling.
WhenyouturnontheHazard
Warning switch, both turn signal
lights blink. All turn signals on the
outside of the vehicle should flash.
64
Instruments and Controls
If a brake light does not work, the
BRAKE LAMP
indicator comes on
when you push the brake pedal with
the ignition switch ON (II).
A burned out brake light is a hazard
when drivers behind you cannot tell
you are braking. Have your brake
lights repaired right away.
Door and Tailgate Open MonitorBrake Lamp Indicator
The appropriate light comes on in
this display if the tailgate or any door
is not closed tightly.
All the lights in the monitor display
come on for a few seconds when you
turn the ignition switch ON (II).
Page 69
Indicator Lights
Main Menu
Table of Contents
‘‘Daytime Running
Lights’’Indicator
Canadian models only
This indicator lights when you turn
the ignition switch to ON (II) with
the headlight switch off and the
parking brake set. It should go off if
youturnontheheadlightsorrelease
the parking brake. If it comes on at
any other time, it means there is a
problem with the DRL. There may
also be a problem with the high
beam headlights.
Cruise Control Indicator
This lights when you set the cruise
control. See pagefor information
172
on operating the cruise control.
High Beam Indicator
This light comes on with the high
beam headlights. See pagefor
72
information on the headlight
controls.
On Canadian models, this indicator
comes on with reduced brightness
when the Daytime Running Lights
(DRL) are on (see page).
73
Low Fuel Indicator
This light comes on as a reminder
that you must refuel soon.
Washer Level Indicator
This light comes on when the
washer fluid level is low. Add washer
fluid when you see this light come on
(see page).
270
Instruments and Controls
65
Page 70
Indicator Lights
Main Menu
Table of Contents
A/T Temperature
Indicator
This indicator monitors the
temperature of the automatic
transmission fluid. The indicator
should come on for a few seconds
when you turn the ignition switch
ON (II). If it comes on while driving,
it indicates the transmission fluid
temperature is too high. Pull to the
side of the road when it is safe, shift
to Park, and let the engine idle until
the indicator goes out.
Continuing to drive with the A/T
Temperature indicator lit may cause
serious damage to the transmission.
66
Instruments and Controls
VTM-4 Indicator
This light normally comes on for a
few seconds when you turn the
ignition switch ON (II). If this light
comes on at any other time, there is
a problem in the 4WD system. Take
the vehicle to your dealer to have it
checked.
This shows your speed in miles per
hour (mph). The smaller inner
numbers are the speed in kilometers
per hour (km/h).
Canadian Models
This shows your speed in kilometers
per hour (km/h). The smaller inner
numbers are the speed in miles per
hour (mph).
FFUUEELL GGAAUUGGEE
OODDOOMMEETTEERR
TTRRIIPP MMEETTEERR RREESSEETT BBUUTTTTOONN
TTEEMMPPEERRAATTUURREE
GGAAUUGGEE
TTRRIIPP MMEETTEERR
SSEELLEECCTT BBUUTTTTOONN
Tachometer
The tachometer shows the engine
speed in revolutions per minute
(rpm). To protect the engine from
damage, never drive with the
tachometer needle in the red zone.
Odometer
The odometer shows the total distance your vehicle has been driven.
It measures miles in U.S. models and
kilometers in Canadian models.
It is illegal under U.S. federal law and
Canadian provincial regulations to
disconnect, reset, or alter the
odometer with the intent to change
the number of miles or kilometers
indicated.
Instruments and Controls
67
Page 72
Gauges
Main Menu
Table of Contents
Trip Meter
SSEELLEECCTT BBUUTTTTOONN
RREESSEETT BBUUTTTTOONN
This meter shows the number of
miles (U.S.) or kilometers (Canada)
driven since you last reset it.
There are two trip meters: Trip A
and Trip B. Switch between these
displays by pressing the Select
button repeatedly. Each trip meter
works independently, so you can
keep track of two different distances.
When you turn the ignition switch
ON (II), what you last selected is
68
Instruments and Controls
displayed.
To reset a trip meter, display it, and
then press and hold the Reset button
until the number resets to ‘‘0.0’’.
Both trip meters will reset if the
vehicle’s battery goes dead or is
disconnected.
Temperature Gauge
This shows the temperature of the
engine’s coolant. During normal
operation, the pointer should rise
from the bottom blue mark to about
the middle of the gauge. In severe
driving conditions, such as very hot
weather or a long period of uphill
driving, the pointer may rise to the
upper white mark. If it reaches the
red (Hot) mark, pull safely to the
side of the road. Turn to pagefor
325
instructions and precautions on
checking the engine’s cooling
system.
Fuel Gauge
This shows how much fuel you have.
It is most accurate when the vehicle
is on level ground. It may show
slightly more or less than the actual
amount when you are driving on
curvy or hilly roads.
The needle returns to the bottom
after you turn off the ignition. The
gauge shows the fuel level reading
immediately after you turn the
ignition switch back ON (II).
Avoid driving with an extremely low
f uel level. Running out of fuel could
cause the engine to misfire, damaging
the catalytic converter.
This indicator reminds you that it is
time to take your vehicle in for scheduled maintenance.
Refer to the Maintenance Schedules
for Normal and Severe Driving
Conditions on pagesand.
252254
For the first 6,000 miles (9,600 km)
after the Maintenance Required
Indicator is reset, it will come on for
two seconds when you turn the
ignition switch ON (II).
Between 6,000 miles (9,600 km) and
7,500 miles (12,000 km) this
indicator will light for two seconds
when you first turn the ignition
switch ON (II), and then flash for
ten seconds.
If you exceed 7,500 miles (12,000
km) without having the scheduled
maintenance performed, this
indicator will remain on as a constant
reminder.
Your dealer will reset this indicator
after completing the scheduled
maintenance. If this maintenance is
done by someone other than your
Acura dealer, reset the indicator as
follows.
CONTINUED
Instruments and Controls
69
Page 74
Gauges
Main Menu
Table of Contents
SSEELLEECCTT BBUUTTTTOONN
RREESSEETT BBUUTTTTOONN
Turn off the engine.
1.
Press and hold the select and reset
2.
buttons on the instrument panel,
then turn the ignition switch ON
(II).
Hold the buttons for
3.
approximately ten seconds until
the indicator resets.
70
Instruments and Controls
Page 75
Controls Near the Steering Wheel
Main Menu
Table of Contents
Thetwoleversonthesteering
column contain controls for driving
features you use most often. The left
lever controls the turn signals,
headlights, and high beams. The
right lever controls the windshield
washers and wipers.
The switches for the hazard warning
lights and rear window defogger are
located to the right of the steering
column.
The controls under the left air vent
areforthecruisecontrol,the
moonroof and the fog lights.
The tilt adjustment lever on the
underside of the steering column
allows you to tilt the steering wheel.
*
To use the horn, press the pad
around the ‘‘A’’ logo.
The rotating switch on the left lever
controls the lights. Turning this
switch to the ‘‘’’ position turns
on the parking lights, taillights,
instrument panel lights, side-marker
lights, and rear license plate lights.
Turning the switch to the ‘‘’’
position turns on the headlights.
72
Instruments and Controls
If you leave the lights on with the
ignition switch in ACCESSORY (I)
or LOCK (0), you will hear a
reminder chime when you open the
driver’s door.
To change between low beams and
high beams, pull the turn signal lever
until you hear a click, then let go.
The blue high beam indicator will
light (see page).
65
To flash the high beams, pull the
turn signal lever back lightly, then
release it. The high beams will come
on and go off.
The high beams will stay on for as
long as you hold the lever back, no
matter what position the headlight
switch is in.
Page 77
Controls Near the Steering Wheel
Main Menu
Table of Contents
Automatic Lighting Off Feature
The Automatic Lighting Off feature
turns off the headlights, fog lights,
parking lights, taillights, side marker
lights, license plate lights and
instrument panel lights within 15
seconds of removing the key from
the ignition switch and closing the
driver’s door.
This feature activates if you leave
the headlight switch in theor
position, remove the key, open,
then close the driver’s door.
If you remove the key from the
ignition switch with the headlight
switch on, but do not open the door
and get out, the lights will turn off
after 10 minutes.
The lights will turn on again when
you unlock or open the driver’s door.
If you unlock the door, but do not
open it within 15 seconds, the lights
will go off. With the driver’s door
open, you will hear a lights-on
reminder chime.
Daytime Running Lights
(Canadian Models)
With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
off, even if you set the parking brake.
The headlights revert to normal
operation when you turn them on
with the switch.
The dial on the instrument panel
controls the brightness of the
instrument panel lights. Turn the dial
to adjust the brightness.
Instruments and Controls
73
Page 78
Controls Near the Steering Wheel
Main Menu
Table of Contents
Turn SignalsWindshield Wipers
To signal a lane change, push lightly
on the turn signal lever in the proper
direction and hold it. The lever will
return to the center position as soon
as you release it.
TTUURRNN SSIIGGNNAALL LLEEVVEERR
Signal a turn or lane change with this
lever. Push down on the lever to
signal a left turn, and up to signal a
right turn. If you push it up or down
all the way, the turn signal continues
to blink even when you release the
lever. It shuts off automatically as
The right lever controls the windshield wipers and washers. The
rotary switch at the end of the lever
has three positions:
INT: intermittent
: low speed
: high speed
you complete the turn.
74
Instruments and Controls
Page 79
Controls Near the Steering Wheel
Main Menu
Table of Contents
If you turn the INT TIME ring to the
shortest delay, the wipers will
change from intermittent to low
speed operation when vehicle speed
exceeds 12 mph (20 km/h).
In intermittent, the wipers operate
every few seconds. You can vary
how often the wipers sweep the
windshield by turning the INT TIME
ring next to the rotary switch. The
sweep interval will change slightly
with speed; getting shorter as you
drive faster. In low speed and high
speed the wipers run continuously.
To operate the wipers in mist mode,
push the control lever down. The
wipers run at high speed until you
release the lever. This gives you a
quick way to clear the windshield.
To clean the windshield, pull back on
the wiper control lever. The washers
spray until you release the lever. The
wipers run at low speed while you’re
pulling the lever, then complete one
more sweep of the windshield after
you release it.
76
Instruments and Controls
The rear window wiper switch is
located next to the windshield wiper
switch.
To activate the rear windshield wiper,
turn the switch ‘‘ON’’. The wiper
operates intermittently. If you wish
to use the wiper and washer, turn
and hold the switch one position up
from ‘‘ON’’. To use the washer only,
turn and hold the switch one position
down from ‘‘OFF’’.
Push the red buttonto the right of
the display to turn on the hazard
warning lights (four-way flashers).
This causes all four outside turn
signals and both indicators in the
instrument panel to flash. Use the
hazard warning lights if you need to
park in a dangerous area near heavy
traffic, or if your vehicle is disabled.
Page 81
Controls Near the Steering Wheel
Main Menu
Table of Contents
Rear Window DefoggerFog Lights
Make sure the rear window is clear
and you have good visibility before
starting to drive.
Thedefoggerwiresontheinsideof
the rear window can be accidentally
damaged. When cleaning the glass,
always wipe side to side.
The rear window defogger will clear
fog,frost,andthinicefromthe
window. Push the defogger button to
turn it on and off. The light above
Turn the fog lights on and off by
pressing the button. The indicator in
the button lights to show the fog
lights are on.
the button lights to show the
defogger is on. If you do not turn it
off, the defogger will shut itself off
after about 15 minutes. It also shuts
off when you turn off the ignition.
You can use the fog lights only when
the headlights are on low beam.
They will go off when you turn the
headlights off or onto high beam.
You have to turn it on again when
you restart the vehicle.
Instruments and Controls
77
Page 82
Controls Near the Steering Wheel
Main Menu
Table of Contents
Steering Wheel Adjustment
See pagefor important safety
information about how to properly
position the steering wheel.
18
Make any steering wheel adjustment
before you start driving.
Adjusting the steering wheel
position while driving may
cause you to lose control of the
vehicle and be seriously injured
inacrash.
Adjust the steering wheel only
when the vehicle is stopped.
78
Instruments and Controls
To adjust the steering wheel upward
or downward:
Push the lever under the steering
1.
column all the way down.
Move the steering wheel to the
2.
desired position, making sure the
wheel points toward your chest,
not toward your face. Make sure
you can see the instrument panel
gauges and the indicator lights.
Push the lever up to lock the
3.
steering wheel in that position.
Make sure you have securely
4.
locked the steering wheel in place
by trying to move it up and down.
Page 83
KeysandLocks
Main Menu
Table of Contents
Keys
KKEEYY
NNUUMMBBEERR
PPLLAATTEE
MMAASSTTEERR
KKEEYYSS
((BBLLAACCKK))
VVAALLEETT KKEEYY
((GGRRAAYY))
Your vehicle comes with two master
keys and a valet key.
The master key fits all the locks on
your vehicle:
• Ignition
• Driver’s Door
•Glovebox
The valet key works only in the
ignition and the door locks. You can
keepthegloveboxlockedwhenyou
leave your vehicle and valet key at a
parking facility.
Youshouldhavereceivedakey
number tag with your keys. You will
need this key number if you ever
have to get a lost key replaced. Keep
the tag stored in a safe place. If you
need to replace a key, use only an
Acura-approved key blank.
These keys contain electronic
circuits that are activated by the
Immobilizer System. They will not
work to start the engine if the
circuits are damaged.
Protect the keys from direct
sunlight, high temperature, and
high humidity.
Donotdropthekeysorsetheavy
objects on them.
Keep the keys away from liquids.
If they get wet, dry them immediately with a soft cloth.
The keys do not contain batteries.
Do not try to take them apart.
Remote Transmitter
Your vehicle also comes with two
remote transmitters; see pagefor
84
an explanation of their operation.
CONTINUED
Instruments and Controls
79
Page 84
KeysandLocks
Main Menu
Table of Contents
Immobilizer System
The Immobilizer System protects
your vehicle from theft. A properlycoded master or valet key must be
used in the ignition switch for the
engine to start. If an improperlycoded key (or other device) is used,
the engine’s fuel system is disabled.
When you turn the ignition switch to
ON (II), the Immobilizer System
indicator should come on for a few
seconds, then go out. If the indicator
starts to blink, it means the system
does not recognize the coding of the
key. Turn the ignition switch to
LOCK (0), remove the key, reinsert
it, and turn the switch to ON (II)
again.
80
Instruments and Controls
The system may not recognize your
key’s coding if another immobilizer
key or other metal object is near the
ignition switch when you insert the
key. To make sure the system
recognizes the key code:
Do not keep other immobilizer
keys on the same key ring.
Use a plastic or leather key fob,
not metal.
Keep other keys away from your
vehicle’s key and the ignition
switch while trying to start the
engine.
If the system repeatedly does not
recognize the coding of your key,
contact your Acura dealer.
The Immobilizer System indicator
will also blink several times when
you turn the ignition switch from ON
(II) to ACCESSORY (I) or LOCK (0).
Do not attempt to alter this system
or add other devices toit. Electrical
problems could result that may make
your vehicle undriveable.
If you have lost your key and you
cannot start the engine, contact your
Acura dealer.
Page 85
KeysandLocks
Main Menu
Table of Contents
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
The ignition switch is on the right
side of the steering column. It has
four positions:
•LOCK(0)
• ACCESSORY (I)
• ON (II)
• START (III)
LOCK (0)Ignition Switch
−
You can insert or
remove the key only in this position.
To switch from ACCESSORY to
LOCK, you must push the key in
slightly as you turn it. The shift lever
must also be in Park. The anti-theft
lock will lock the steering column
when you remove the key.
If the front wheels are turned, the
anti-theft lock may sometimes make
it difficult to turn the key from
LOCK to ACCESSORY. Firmly turn
the steering wheel to the left or to
the right as you turn the key.
CONTINUED
Instruments and Controls
81
Page 86
KeysandLocks
Main Menu
Table of Contents
−Use this position
ACCESSORY (I)
In this position,
you can operate the audio system
and the accessory power socket.
−
ON (II)
This is the normal key
position when driving. All features
and accessories on the vehicle are
usable. Several of the lights on the
instrument panel come on as a test
when you turn the ignition switch
from ACCESSORY to ON.
82
Instruments and Controls
START (III)Power Door Locks
−
only to start the engine. The switch
returns to ON (II) when you let go of
MMAASSTTEERR DDOOOORR LLOOCCKK SSWWIITTCCHH
the key.
The engine will not start if the
Immobilizer System does not
recognize the key’s coding (see page
).
80
You will hear a reminder beeper if
you leave the key LOCK (0) or
ACCESSORY (I) position and open
thedriver’sdoor.Removethekeyto
turn off the beeper.Each front door has a master door
lock switch. Either switch locks and
unlocks all doors and the tailgate.
Push the switch down to lock all
doors and the tailgate, and up to
unlock them.
Page 87
KeysandLocks
Main Menu
Table of Contents
LLOOCCKK TTAABB
Each door has a lock tab on the top.
Whenyoupushdownthelocktabon
the driver’s door, all the doors and
the tailgate lock. Pulling up the lock
tab on the driver’s door unlocks only
that door. The lock tabs on the other
doors lock and unlock only that door.
To lock the front passenger’s door
when getting out of the vehicle, push
the lock tab down and close the door.
To lock the driver’s door, along with
the remaining doors and the tailgate,
push the lock tab down or push the
master switch down, then close the
door.
All doors and the tailgate can be
locked from the outside by using the
key in the driver’s door. To unlock
only the driver’s door from the
outside, turn the key and release it.
If you turn the key and hold it, all
doors and the tailgate will unlock. All
four doors and the tailgate will
unlock when you unlock the
passenger’s door with the key.
Lockout Prevention
If you forget and leave the key in the
ignition switch, Lockout Prevention
will not allow you to lock the driver’s
door. With the driver’s door open
andthekeyintheignition,both
master door lock switches are
disabled. However, if the driver’s
door is not open, the master door
lock switches are not disabled.
Pushing the switch down on the
open passenger’s door will lock all
doors. If you try to lock an open
driver’s door by pushing down the
lock tab, the tabs on all doors pop out.
Pushingdownthelocktabonthe
passenger’s door only locks that door.
Instruments and Controls
83
Page 88
KeysandLocks
Main Menu
Table of Contents
Remote Transmitter
LLEEDD
UUNNLLOOCCKK
BBUUTTTTOONN
LLOOCCKK
BBUUTTTTOONN
PPAANNIICC
BBUUTTTTOONN
You can lock and unlock your vehicle
with the remote transmitter. When
you push the LOCK button, all doors
and the tailgate lock. The parking
lights, side marker lights, taillights
and instrument panel lights flash
once.
84
Instruments and Controls
When you push the LOCK button a
second time within 5 seconds after
you have locked the doors, you will
hear a beep to verify that the
security system has set.
When you push the UNLOCK button
once, only the driver’s door unlocks.
The remaining doors and the tailgate
unlock when you push the button a
second time. The parking lights, side
marker lights, taillights and
instrument panel lights flash twice
when you push the button.
When you press the UNLOCK
button, the front and rear individual
map lights and the cargo area light,
depending on their switch positions,
will come on (see page). If you
117
do not open any door or the tailgate,
the lights stay on for about 10
seconds, then go out. If you relock
thedoorsandthetailgatewiththe
remote transmitter before 10
seconds have elapsed, the lights will
go off immediately.
If you unlock the doors and the
tailgate with the remote transmitter,
but do not open any door or the
tailgate within 30 seconds, all doors
and the tailgate automatically relock.
You cannot lock the doors and the
tailgate with the remote transmitter
if any door or the tailgate is not fully
closed. You cannot lock or unlock
thedoorsandthetailgatewiththe
key in the ignition switch.
Page 89
Panic ModeReplacing the Battery
Main Menu
Table of Contents
Panic mode allows you to remotely
activate your vehicle’s horn and
lights to attract attention. When
activated, the horn will sound, and
the headlights, parking lights, side
marker lights, taillights and
instrument panel lights will flash for
about 30 seconds. To activate panic
mode,pressandholdthePANIC
button for about one second.
To cancel Panic mode before 30
seconds, press any button on the
remote transmitter. You can also
turn the ignition switch to ON (II).
When the remote transmitter’s
battery begins to get weak, it may
take several pushes on the button to
Panic mode will not activate if the
key is in the ON (II) position.
lock or unlock the doors and the
tailgate, and the LED will get dim.
Replace the battery as soon as
possible.
Battery type: CR2025
KeysandLocks
To replace the battery, place a cloth
on the edge of the transmitter and
remove the upper half by carefully
prying on the edge with a small flattip screwdriver.
CONTINUED
Instruments and Controls
85
Page 90
KeysandLocks
Main Menu
Table of Contents
Remove the old battery and note the
polarity. Make sure the polarity of
the new battery is the same (side
+
facing up), then insert it in the
transmitter.
Snapthetwohalvesofthe
transmitter case back together.
86
Instruments and Controls
Transmitter Care
Avoid severe shock to the transmitter, such as dropping or throwing
it. Also, protect it from extreme hot
or cold temperatures.
Clean the transmitter case with a
soft cloth. Do not use strong
cleaners or solvents that could harm
the case. Immersing the transmitter
in any liquid will harm the transmitter and cause it to not function
properly.
If you lose a transmitter, you will
need to have the replacement
programmed to your vehicle’s
system by your Acura dealer. Any
other transmitters you have will also
need to be reprogrammed.
As required by the FCC:
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
This device complies with Industry
Canada Standard RSS-210.
Operation is subject to the following two
conditions: (1) this device may not cause
interference, and (2) this device must
accept any interference that may cause
undesired operation of the device.
Page 91
KeysandLocks
Main Menu
Table of Contents
Recalling a Memorized Driving
Position
On Touring Model
WWiitthh MMeemmoorryy 22WWiitthh MMeemmoorryy 11
Theremotetransmitterswillalso
activate the Driving Position
Memory System (see page).
107
When you open the driver’s door
after unlocking it with the remote
transmitter, you will hear a beep.
The driver’s seat and outside mirrors
move to the positions stored in that
memory location. You will hear two
beeps when the movement is
complete.
If the seat and mirrors are already in
the proper positions, you will hear
three beeps when you open the door.
The driving position memory
activated (Memory 1, Memory 2) is
shownonthebackofeach
transmitter. Make sure you store
your desired driving position in the
memory that is activated by the
transmitter you normally carry.
You can turn the driving position
memory activation off and on. To
turn it off, press and hold the LOCK
and UNLOCK buttons at the same
time for about one second. The LED
in the remote transmitter will blink
twice. Then release the buttons.
To turn it back on, repeat this
procedure. The LED will come on
for one second to indicate the
feature has been turned on.
Instruments and Controls
87
Page 92
KeysandLocks
Main Menu
Table of Contents
Childproof Door LocksTailgate
LLOOCCKK LLEEVVEERRHHAANNDDLLEE
The childproof door locks are
designed to prevent children seated
in the rear from accidentally opening
the rear doors. Each rear door has a
lock lever near the edge. With the
lever in the LOCK position, the door
cannot be opened from the inside
regardless of the position of the lock
tab. To open the door, pull the lock
tab up and use the outside door
handle.
88
Instruments and Controls
To open the tailgate, pull the handle,
then lift up the tailgate.
To close the tailgate, use the inner
handle to pull the tailgate down, then
press down on the back edge.
See pagefor information on
203
cargo loading. Keep the tailgate
closed at all times while driving to
avoid damaging the tailgate, and to
prevent exhaust gas from getting
into the interior. See
Monoxide Hazard
Carbon
on page.
56
Page 93
Glove Box
Main Menu
Table of Contents
GGLLOOVVEE BBOOXX
Open the glove box by squeezing the
handle. Close it with a firm push.
Lock or unlock the glove box with
the master key.
KeysandLocks
An open glove box can cause
serious injury to your passenger
inacrash,evenifthe
passenger is wearing the seat
belt.
Always keep the glove box
closed while driving.
Instruments and Controls
89
Page 94
Seats
Main Menu
Table of Contents
Power Seat Adjustments
See pagesfor important safety
information and warnings about how to
properly position seats and seat-backs.
Your Acura has power adjustments
for the driver’s seat. The two power
seat adjustment switches are on the
outside edge of the seat bottom.
The Touring package also has power
adjustments for the front passenger’s
seat. The MDX without the Touring
package has manual adjustments.
Thesecondandthirdrowseatsin
both models have manual
adjustments.
You can adjust the seat with the
ignition switch in any position. Make
all seat adjustments before you start
driving.
−
1213
The long horizontal switch adjusts
the seat bottom in several directions.
The short vertical switch adjusts the
seat-back angle.
or backward to move the seat
forward or backward.
Pull up or push down on the front of
the switch to move the seat bottom’s
front edge up or down. Pull up or
push down on the rear of the switch
to move the rear of the seat bottom
up or down.Push the horizontal switch forward
90
Instruments and Controls
Page 95
Driver’s Lumbar Support
Main Menu
Table of Contents
Seats
Pull the center of the horizontal
switch up to raise the seat. Push it
down to lower the seat.
Adjust the seat-back angle by
pushing the rear switch in the
direction you want to move.
Vary the lumbar support by moving
the lever on the right side of the
seat-back. Move the lever forward or
backward to adjust the lumbar
support through its full range.
Instruments and Controls
91
Page 96
Seats
Main Menu
Table of Contents
Manual Seat Adjustments
See pagesfor important safety
information and warnings about how to
properly position seats and seat-backs.
Make all seat adjustments before
you start driving.
−
1213
92
Instruments and Controls
To adjust the seat forward and
backward, pull up on the lever under
the seat cushion’s front edge. Move
the seat to the desired position and
releasethelever.Trytomovethe
seat to make sure it is locked in
position.
To change the seat-back angle of the
front seats, pull up on the lever on
the outside of the seat bottom.
Page 97
Second and Third Row Seat
Main Menu
Table of Contents
Adjustments
Seats
To change the seat-back angle of the
seats in the second row, pull up on
thehandleontheoutsideoftheseatback.
SSEECCOONNDD
SSEEAATT
TTHHIIRRDD
SSEEAATT
HHAANNDDLLEE
To adjust the seat-back angle of the
third seat, pull on the handle on the
back of the seat-back, move the seatback to the desired position, and
release the handle. Let the seat-back
latch in the new position.
Instruments and Controls
93
Page 98
Seats
Main Menu
Table of Contents
Head Restraints
See pagefor important safety
information and a warning about how to
properly position the head restraints.
14
Your vehicle is equipped with head
restraints in all seating positions.
The head restraints help protect you
and your passengers from whiplash
and other injuries. They are most
effective when you adjust them so
the back of the occupant’s head rests
against the center of the restraint. A
taller person should adjust the
restraint as high as possible.
94
Instruments and Controls
To remove a head restraint for
cleaning or repair, pull it up as far as
it will go. Push the release button
and pull the restraint out of the seatback.
RREELLEEAASSEE BBUUTTTTOONN
The head restraints adjust for height.
You need both hands to adjust the
restraint. Do not attempt to adjust it
while driving. To raise it, pull upward.
To lower the restraint, push the
release button sideways and push
the restraint down.
Page 99
Rear Seat AccessFolding the Second Seat
Main Menu
Table of Contents
The left and right halves of the
second seat can be folded up
separately to create more cargo
space.
If you are folding the left half of
1.
the seat, use the ignition key to
release the seat belt from the
detachable anchor. Allow the seat
belt to retract into the roof. Insert
the latch plate into the roof holder.
RREELLEEAASSEE LLEEVVEERR
To get into the third row seats, pull
Lower the head restraint to its
2.
lowest position.
upontheleveronthesideofthe
passenger’s side second row seatback. The seat-back will tilt forward,
Pull up on the handle on the
3.
outside of the seat-back.
and the seat will slide forward.
Seats
HHAANNDDLLEE
Fold the seat-back forward.
4.
Reverse this procedure to return the
seat to the upright position. Make
sure the seat is locked securely
before driving.
After you return the seat-back to the
upright position, push the whole seat
backwards until it latches. Make
sure the seat is fully latched before
sitting in it.
(Left half) Remove the seat belt
from its holder in the roof, and
connect it to the detachable anchor
(see page).
98
Instruments and Controls
95
Page 100
Seats
Main Menu
Table of Contents
Folding the Third Seat
RREELLEEAASSEE BBUUTTTTOONN
To create more cargo space, you can
fold the third seat forward.
To fold the third seat:
Remove the head restraints by
1.
pushing the release buttons and
pulling the restraints out.
96
Instruments and Controls
Store the head restraints in the
2.3.
storage compartment under the
cargo area floor. Insert the shafts
of the head restraints into the
holes in the sides of the storage
compartment.
Use the ignition key to release the
seat belt from the detachable
anchor.
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.