ACTi Indoor PTZ Installation Guide on Dropped Ceiling with Flush Mount
2013/12/09
Indoor PTZ
Mounting on the Ceiling
Using Flush Mount
Installation Guide
For Models:
I91, I92, KCM-8111
www.acti.com
Installation Guide
Table of Contents
Installation Procedures ..................................................... 3
Step 1: Drill a Hole on the Ceiling ............................................................ 3
Step 2: Prepare the Flush Mount .............................................................. 4
Step 3: Loosen the Retaining Brackets ................................................... 4
Step 4: Install the Mount ........................................................................... 5
Step 5: Connect the Cables and Optional Accessories .......................... 7
Step 6: Install the Camera ......................................................................... 7
Step 7: Attach the Cover Ring .................................................................. 8
Step 8: Access the Camera Live View ...................................................... 8
Safety Information .............................................................. 9
2
www.acti.com
Installation Guide
Flush Mount Kit
Other Tools (not supplied)
Flush Mount
Drill template
Screw (1)
Foam rubber pads (3)
Fixing bracket
Jig saw
Phillips screwdriver
Installation Procedures
Use the Flush Mount when installing the camera on a dropped ceiling; there is space above the
ceiling where the camera body can be hidden from view and only the dome cover can be seen
underneath the ceiling.
NOTE: The Flush Mount is not included in the camera package. Contact your sales agents to
purchase.
Before installation, prepare the following:
To mount the camera, follow the procedures below:
Step 1: Drill a Hole on the Ceiling
Drill a 184-mm diameter hole on the ceiling where you want to mount the camera, then route the
network cable, power adaptor, and other cables (e.g. DI/DO, audio cables, etc.) through the hole.
3
Loading...