ACTi I27, I28, E210, B214, B215 User Manual
Zoom Box Camera Series
Hardware Manual
B21, B22, B24, B25, B27, B210, B214, B215
E210
I24, I25, I27, I28
2016/01/04
www.acti.com
Hardware Manual
Table of Contents
Precautions ............................................................. 4
Safety Instructions .................................................................................... 6
Introduction ............................................................. 7
The List of Models ..................................................................................... 7
Package Contents ...................................................................................... 9
Physical Description ............................................................................... 10
Mounting Options .................................................................................... 14
Before Installation................................................. 15
Connecting a Power Adapter (Optional) ................................................ 15
Connecting the DI/DO and Audio Devices (Optional) ........................... 17
How to Connect DI/DO Devices ............................................................ 17
How to Connect Audio Devices ............................................................. 20
Connecting a Serial Device (Optional) ................................................... 21
Indoor Installation Procedures ............................ 23
Step 1: Mount the Indoor Bracket .......................................................... 23
Step 2: Attach the Camera to the Bracket ............................................. 24
Step 3: Connect the Cable(s) .................................................................. 26
Step 4: Access the Camera Live View .................................................... 27
2
www.acti.com
Hardware Manual
Other Adjustments and Accessories .................. 28
How to Install / Remove the Memory Card ............................................ 28
How to Insert the Memory Card ............................................................ 28
How to Remove the Memory Card ........................................................ 28
How to Reset the Camera ....................................................................... 29
Accessing the Camera ......................................... 30
Configure the IP Addresses .................................................................... 30
Access the Camera .................................................................................. 34
3
www.acti.com
Hardware Manual
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to follow
the safety instructions given may directly endanger people, cause damage to the system or to
other equipment.
Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
ACTi and ACTi logo are registered trademarks of ACTi Corporation. All other names and products
used in this manual are registered trademarks of their respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your local
office if you find any inaccuracies or omissions. ACTi will not be held responsible for any
typographical or technical errors and reserves the right to make changes to the product and
manuals without prior notice.
4
www.acti.com
Hardware Manual
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
5
www.acti.com
Hardware Manual
Safety Instructions
Cleaning
Disconnect this product from the power supply before cleaning.
Accessories and Repair Parts
Use only the accessories and repair parts recommended by the manufacturer.
Installation
Install this device in a dry place protected from weather.
Servicing
Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Damage Requiring service
Disconnect this product from the power supply immediately and refer servicing to qualified
service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the product.
3) If the inner parts of product have been directly exposed to rain or water.
4) If the product does not operate normally even by following the operating instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as improper
adjustment of other controls may result in damage, and will often require extensive work by a
qualified technician to restore the product to its normal operation.
Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine if the product is in proper operating condition.
6
www.acti.com
Hardware Manual
B21
5MP Zoom Box with D/N, Basic WDR, 12x Zoom lens
B22
5MP Zoom Box with D/N, Basic WDR, 10x Zoom lens
B24
1.3MP Zoom Box with D/N, Basic WDR, SLLS, 10x Zoom lens
B25
2MP Zoom Box with D/N, Basic WDR, SLLS, 10x Zoom lens
B27
3MP Zoom Box with D/N, Superior WDR, 12x Zoom lens
B210
10MP Zoom Box with D/N, Basic WDR, 10x Zoom lens
B214
2MP Video Analytics Zoom Box with D/N, Extreme WDR, SLLS,
20x Zoom lens
B215
2MP Video Analytics Zoom Box with D/N, Extreme WDR, SLLS,
30x Zoom lens
E210
10MP Zoom Box with D/N, Basic WDR, 4.3x Zoom lens
I24
1MP Zoom Box with D/N, Extreme WDR, ELLS, 30x Zoom lens
Introduction
The List of Models
This hardware manual contains the following models:
7
www.acti.com
I25
2MP Zoom Box with D/N, Extreme WDR, ELLS, 30x Zoom lens
I27
4MP Zoom Box with D/N, Advanced WDR, SLLS, 30x Zoom lens
I28
2MP Video Analytics Zoom Box with D/N, Extreme WDR, SLLS,
33x Zoom lens
Hardware Manual
8
www.acti.com
Package Contents
Camera
Terminal Block
(for Power)
Terminal Block
(for Audio and DI/DO)
Terminal Block
(for Serial Port)
Quick Installation Guide
Warranty Card
Hardware Manual
NOTE: The pictures are for reference only. Actual items may slightly vary.
9
www.acti.com
Physical Description
Item
Description
1
Memory Card
Insert a memory card into this slot for local
recording purposes. See How to Install / Remove
the Memory Card on page 28 for more information.
NOTE:
B214, B215, I28 support microSDHC cards only.
The other models support microSDHC and
microSDXC cards.
B2x / I2x
B210, B214, B215, I28
Hardware Manual
10
www.acti.com
Hardware Manual
Item
Description
2
Input / Output
Digital Input / Output
(DIDO)
This connector connects to digital input or output
devices, such as an alarm trigger, panic button, etc.,
Digital Input (DI) and Digital Output (DO) devices
are used in applications like motion detection, event
triggering, alarm notifications, etc. See How to
Connect DI/DO Devices on page 17 for more
information.
Audio Input / Output
This connector also connects to audio input and
output devices, such as microphones and speakers.
See How to Connect Audio Devices on page 20
for more information.
3
DC 12V Power
Input
In case the camera is connected to a non-PoE
(Power over Ethernet) switch, use this connector to
connect an external adaptor (not included) to the
camera. See Connecting a Power Adapter
(Optional) on page 15 for more information.
4
Reset Button
The purpose of reset button is to restore the factory
default settings of the camera. See How to Reset
the Camera on page 29 for more information.
5
Power LED
The Power LED turns on when the camera is
powered on and the system is running.
6
Ethernet Port
Connects to a network using a standard Ethernet
cable.
7
Serial Port
This port connects to serial devices via RS-485 or
RS-422 protocols. Use the supplied serial port
terminal block to connect the wires from the camera
to the serial device.
See Connecting a Serial Device (Optional) on
page 21 for connection details.
11
Loading...