ACT DESFire EV1 1030, DESFire EV1 1030PM, DESFire EV1 1040, DESFire EV1 1050 Operating And Installation Instructions

Operating & Installation Instructions for

ACTpro MIFARE DESFire EV1 Readers

18-00072

ACTpro DESFIRE EV1 Operating and Installation Manual Rev 1.0

Contents

Introduction:aboutMIFAREDESFireEV1 ___________________________________________________ 1
ImportantInstallationNotes _____________________________________________________________ 1
OrderingInformation___________________________________________________________________1
OrderingInformation___________________________________________________________________1
ReaderOutputDataFormat _____________________________________________________________ 2

WiringInformationfor“Clock&Data”Output ____________________________________________________ 2
WiringInformationfor“Wiegand”Output _______________________________________________________ 3

ReaderConfiguration___________________________________________________________________4
ReaderConfiguration___________________________________________________________________4

Operation:ACTproMIFAREDESFireEV11030PM/1040/1050 ______________________________________ 4
Operation:ACTproMIFAREDESFireEV11030 _____________________________________________________ 4

BacklightOperation ____________________________________________________________________ 5
StatusLEDoperationonACTproMIFAREDESFireEV11030PMreaderonly _______________________ 5
ReaderInputs _________________________________________________________________________5
PowerOnBeepCodes __________________________________________________________________ 5
InstallationdiagramforDESFireEV1Surface/FlushMountReaders ____________________________6

FlushMountUnit ____________________________________________________________________________ 6
SurfaceMountUnit __________________________________________________________________________ 6

InstallationdiagramforDESFireEV1PanelMountReader _____________________________________ 6
InstallationdiagramforDESFireEV1PanelMountReader _____________________________________ 7

1

ACTpro DESFIRE EV1 Operating and Installation Manual Rev 1.0

Introduction: about MIFARE DESFire EV1

The ACTpro MIFARE DESFIRE EV1 cards are widely used in areas where security of the data is important.
The technology is used in many areas such as access control, transport, cashless vending and logical access
to name a few and it is an ideal platform for different vendors to store data for different applications. The data
is stored in files, each file having it’s own unique access keys, and the transmission of the data is secured by
the onboard AES hardware cryptographic engine. Each MIFARE DESFire EV1 card has a unique serial
number.

Important Installation Notes

•On the ACTpro MIFARE DESFire EV1 1030 ensure the grey cable is snipped before applying power.

•Check the correct voltage is applied to the reader

•Confirm the required Data output “Clock & Data” or “Wiegand”

•Confirm the required reader File, Serial/reverse Serial.

Ordering Information



DESFire EV1

1030

DESFire EV1

1030PM

DESFire EV1

1040

DESFire EV1

1050

Description MIFARE DESFire

EV1 proximity

reader

MIFARE DESFire

EV1 proximity

reader

MIFARE DESFire EV1

proximity reader

MIFARE DESFire EV1

pin and proximity reader

Mounting Mullion Panel Surface/Flush
Proximity Yes
Pin No Yes

Outputs Clock & Data or
Wiegand 37bit.

Yes

Selectable file, serial &
reverse serial

Yes

Construction Robust polycarbonate housing
Potted Electronics Yes

IP Rating IP 67
Tri-Colour LED Yes

Built-in buzzer Yes
External Buzzer Control No Yes
Operating Voltage 12 - 24 Volt DC
Current Consumption (Typ) 40mA 40mA 70mA 70mA
Current Consumption (Peak) 130mA 70mA 140mA 140mA
Weight 200gms 65g 142g 155g
Dimensions (H * W * D) 108 * 36 * 13 63 * 58 * 23 110 * 100 * 35 110 * 100 * 35
Operating Temperature -10 to +50 Celsius

Ordering Information

Reader Order Codes Description

ACTproEV1 1030 ACTpro MIFARE DESFire EV1 Mullion Proximity reader
ACTproEV1 1030PM ACTpro MIFARE DESFire EV1 Panel mount Proximity reader
ACTproEV1 1040 ACTpro MIFARE DESFire EV1 surface / flush mount Proximity reader
ACTproEV1 1050 ACTpro MIFARE DESFire EV1 surface / flush mount Proximity and Pin reader

Card Order Code

ACTproEV1 Card-B ACT encoded MIFARE DESFIRE EV1 2K ISO Card

1