ACS EXP-06E User Manual

Access Control System

EXP-06E

Single Door Access Controller

Installation and Operation

Instructions

Version 6.6

Revision 2003-5

EXP-06E Access Control System Installation Instruction

1. INTRODUCTION

The ACS Access Control System is a powerful software based time recording, access

control and integrated security system designed to meet the most demanding access

control and point monitoring applications. Programming the system is done from a

cost effective IBM compatible microcomputer. Cards can be added or deleted in

seconds. All events can be archived for future reference and report generation.

The system can control doors, turnstiles, gates and more. It can monitor different

sensors such as intrusion motion detectors, door contacts, low temperature and can

activate cameras or lighting controls automatically, unattended. The ACS access

Control System provides user with much more than basic access control features. In

its standard configuration, the system not only provides sophisticated features for the

most demanding installation, but also complies with functionality and budgetary

requirements.

For standalone system, the access controller contains the keypad with programmable

functions. It can be used to define the cardholder information, time schedule for

access of user, holiday definition and record printing.

For PC network system, RS485 and communication interface card can be used to link

up the controllers to PC for direct accessing the update records.

Satcom Systems (International) Co., Ltd.

2

2. Hardware Requirements

EXP-06E Access Control System Installation Instruction

Computer :

CPU: Pentium III 800MHz

Hard disk space: 500MB

RAM: 64MB

OS: Windows 98SE English / Chinese version (big5 version)

Motherboard: 1 x RS232 port

Display: SVGA 800x600 resolution color monitor with 16 bits color

Input Device: Enhanced 101 keyboard and serial mouse

Floppy Disk: 1 x 3.5” high-density floppy disk drive

CD-ROM Drive: 1 x 8X CD-ROW Drive

Printer: 24pin dot matrix (360dpi)/laser jet (300dpi). Inkjet printer is not

recommended. Users are highly recommended to use network

printer.

Modem: (For Wide Area Access) Hayse compatible 9600 baud rate.

Satcom Systems (International) Co., Ltd.

3

EXP-06E Access Control System Installation Instruction

3. EXP-06E Access Controller Configuration

I/O Capacities

IN Reader ----------------------------- 1

IN Keypad ----------------------------- 1

OUT Reader ----------------------------- 1

Electric Door Lock Output ----------------------------- 1

Auxiliary Relay Output ---------------------------- 1

Programmable Relay Output ---------------------------- 1

Parallel Printer Port ----------------------------- 1

Door Release Button Input ----------------------------- 1

Door Sensor Input ----------------------------- 1

RS232 Communication Interface ----------------------------- 1

RS485 Communication Interface ----------------------------- 1

Memory Capacities

Cardholders & Transactions --------------------------- 16,000

Access Time Zone --------------------------- 9

Pin Entry Time Zone --------------------------- 3

Cardholder Authority Levels --------------------------- 3

Holidays --------------------------- 100

IN Reader : Can be using LED Indication Lamp with Keypad

OUT Reader : Only LED Indication Lamp

System Characteristics

Multiple Technologies:

Supports Proximity and Magnetic Stripe Card

Selectable Acceptance Entrance Mode:

Card Only, Pin Code Only, Card + Pin Code

Complete Standalone:

Do not depend on other equipment for operation and programming.

Distributed Data:

Memory and processing located at every door. No degraded mode.

Optional Remote Terminal:

The optional remote terminal can be used for alarm monitoring and selected system

commands. The terminal can be located a few away or across the country via

modems.

Satcom Systems (International) Co., Ltd.

4

EXP-06E Access Control System Installation Instruction

Exit

A

B

Auxiliary Relay Output

Alarm Relay Output

Parallel Printer

Host PC

Modem

1

32

D

4. CONFIGURARTION DIAGRAM

Wiring Configurations

Entry

Communication Configurations

C
B
A

A

EXP-06 E

A
A

D

E

D

EXP-06EEXP-06E

Host PC

E

E

RS232/RS485

Converter

Modem

Telephone Line

DD

1

32

RS232/RS485

Converter

EXP-06EEXP-06E

Wire Label From To Function Gauge(AWG) No. of Pair Shielded Max. Length (M)
A EXP-06E I/O Device Control 24 1 Yes 150
B EXP-06E Reader Reader Comm. 24 4 Yes 150
C EXP-06E Keypad Keypad Comm. 24 4 Yes 8 /150 (EXP-02 Extension Module)
D EXP-06E PC RS485 Comm. 24/22 2 Yes 1,200
E EXP-06E PC RS232 Comm. 24 2 Yes 16

Satcom Systems (International) Co., Ltd.

5