Acoustic solutions LCD32761HDF User Manual

Download

OPERATING INSTRUCTIONS

LCD32761HDF

COLOUR TELEVISION WITH REMOTE CONTROL

If you require any further assistance with set up or

experience any technical difficulties please call

Helpline No: 0845 6040105

Contents

Features ............................................................... 3

Accessories ......................................................... 3

Introduction ........................................................... 4

Preparation ........................................................... 4

Safety Precautions ............................................... 4

Power Source .................................................. 4

Power Cord ...................................................... 4

Moisture and Water .......................................... 4

Cleaning ............................................................ 4

Ventilation ......................................................... 5

Heat and Flames ............................................... 5

Lightning ........................................................... 5

Replacement Parts ............................................ 5

Servicing ........................................................... 5

Waste Disposal ................................................. 5

Information for Users in

European Union Countries ................................ 5

Disconnecting the Device ................................. 6

Headphone Volume ........................................... 6

Installation ......................................................... 6

LCD Screen ...................................................... 6

Warning ............................................................ 6

Overview of the Remote Control .......................... 7

LCD TV and Operating Buttons ............................ 8

Viewing the Connections ..................................... 9

Power Connection .............................................. 11

Aerial Connection ............................................... 11

Connecting to a DVD Player ............................... 12

Using Other Connectors ..................................... 13

Connecting Other Equipment via Scart ............... 14

Inserting Batteries in the

Remote Control Handset ..................................... 15

Operating Range for the Remote Control ............ 15

Switching the TV On/Off .................................... 16

To Switch the TV On ...................................... 16

To Switch the TV Off ...................................... 16

Input Selection .................................................... 16

Basic Operations ................................................ 17

Operation with the Buttons on the TV ............ 17

Volume Setting ............................................ 17

Programme Selection .................................. 17

Viewing Main Menu ..................................... 17

AV Mode ..................................................... 17

Operation with the Remote Control ................. 17

Volume Setting ............................................ 17

Programme Selection (Previous or

Next Programme) ........................................ 17

Programme Selection (Direct Access) ........ 17

Initial Settings ...................................................... 18

General Operation .............................................. 18

Information Banner ......................................... 18

Electronic Programme Guide (EPG)................. 19

Displaying the Subtitles ................................... 20

Digital Teletext ................................................. 20

Over Air Download ......................................... 21

Widescreen .................................................... 21

IDTV Menu System ............................................. 21

Channel List .................................................... 21

Navigating the Entire Channel List ............... 22

Deleting the Channels in the Channel List ... 22

Renaming Channels .................................... 22

Adding Locks to Channels .......................... 23

Setting Favourites ....................................... 23

On Screen Help ........................................... 23

Installation ....................................................... 23

Add New Channels ..................................... 24

Automatic Search ................................. 24

Manual Search ...................................... 24

Configuration .................................................. 25

Audio Language .......................................... 25

Subtitle ........................................................ 25

Favourite Mode ........................................... 26

EPG Preference .......................................... 26

Receiver Upgrade ....................................... 26

Automatic Download

(Automatic Upgrade) ............................ 26

Search for New Version (Manual

Upgrade) ............................................... 26

Parental Settings ......................................... 27

Timers ............................................................. 27

Language ........................................................ 28

TV Setup ......................................................... 28

Common Interface ........................................... 29

Navigating the Analogue TV Menu System ......... 30

Analogue TV Menu System ................................ 30

Picture Menu ................................................... 30

Mode ........................................................... 30

Contrast/Brightness/Sharpness/Colour/Hue 30

Colour Temp ................................................ 30

Noise Reduction .......................................... 31

Game Mode (optional) ................................. 31

Film Mode .................................................... 31

3D Comb ......................................................... 31

Picture Zoom ............................................... 31

Reset .......................................................... 31

Store ........................................................... 31

Sound Menu.................................................... 31

Volume ........................................................ 31

Equalizer ..................................................... 31

Balance ....................................................... 32

Headphone.................................................. 32

Volume .................................................. 32

Balance ................................................. 32

Sound Mode ................................................ 32

AVL ............................................................. 32

Effect .......................................................... 32

Dynamic Bass ............................................. 32

Subwoofer .................................................. 32

3D Panorama ............................................... 32

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:331

English - 1 -

Store ........................................................... 33

Feature Menu.................................................. 33

PIP ............................................................... 33

PIP ON-OFF ........................................... 33

PIP Picture ............................................. 33

PIP Position............................................ 33

PIP Source ............................................ 33

PIP SWAP.............................................. 33

PAP ............................................................. 33

PAP ON-OFF ......................................... 34

PAP Picture ........................................... 34

PAP Source ........................................... 34

PAP SWAP ............................................ 34

Sleep Timer ................................................. 34

Child Lock ................................................... 34

Language .................................................... 34

EXT-2 Out .................................................... 34

Blue Background ......................................... 34

Menu Background ....................................... 34

Menu Timeout .............................................. 34

Teletext Language ....................................... 35

Default Zoom............................................... 35

HDMI Full Mode ............................................ 35

Install Menu ..................................................... 35

Program Table ............................................. 35

Name .................................................... 35

Insert .................................................... 35

Delete.................................................... 35

APS (Auto Programming System) ......... 36

Country ............................................ 36

Program ...................................................... 36

Band ........................................................... 36

Channel ....................................................... 36

Colour System............................................. 36

Sound System ............................................. 36

Fine Tune .................................................... 36

Search ........................................................ 36

Store ........................................................... 37

Install Menu in AV Modes ............................ 37

Colour System ...................................... 37

VCR ...................................................... 37

Store Program ............................................. 37

Source Menu .................................................. 37

Displaying TV Information ................................... 38

Mute Function ..................................................... 38

PIP (Picture-in-Picture) and

PAP (Picture-and-Picture) Modes ....................... 38

Picture Mode Selection ....................................... 38

Freezing Picture ................................................. 38

Zoom Modes ....................................................... 38

Auto ............................................................ 38

16:9 ............................................................. 39

4:3 ............................................................... 39

Panoramic ................................................... 39

14:9 Zoom ................................................... 39

Cinema ........................................................ 39

Subtitle ........................................................ 39

Teletext ............................................................... 40

Tips .................................................................... 41

Screen Care ................................................... 41

No Power ........................................................ 41

Poor Picture .................................................... 41

Input Sources ................................................. 41

CI Module ........................................................ 41

Appendix A: AV and HDMI Signal Compatibility ... 42

Appendix B: Pin Specifications ........................... 43

Appendix C: Important Instruction ....................... 44

Specifications ..................................................... 45

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:332

English - 2 -

Features

GHI

MNO

PQR

VWX

P<P/SWAP

TV/DTV

GUIDE

• Remote controlled colour LCD TV.

• Fully integrated digital TV (DVB-T).

• It has an HDMI connector for digital video

and audio. This connection is also designed

to accept high definition signals.

• 100 programmes from VHF, UHF bands or

cable channels can be preset.

• It can tune cable channels.

• OSD menu system.

• It has two scart sockets for external devices

(such as video, video games, audio set, etc.).

• Stereo sound system (3D Panorama).

• Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual search.

• Sleep timer.

• Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volume Limiting).

• When no valid signal is detected , after 5

minutes the TV switches itself automatically

to standby mode.

• PLL (Frequency Search).

• Audio line out.

• Game Mode (optional)

Accessories

Remote Controller

ABC DEF

1 2

JKL

STU

7 8

-/--

SOURCE

EXIT

INFO

I-II

P/CH

WIDE

Batteries

2 X AAA

Instruction Book

English - 3 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:333

Introduction

Than k yo u for choosing thi s

product. This manual will guide

you for the proper operation of

your TV. Before operating the TV,

please read this manual thoroughly.

Please do keep this manual in a safe place

for future references.

Preparation

For ventilation, leave a free space of at least

10 cm all around the set. To prevent any fault

and unsafe si tuations, please do not place

any objects on top of the set.

Use this device in moderate climates.

Safety Precautions

Please read the following recommended

safety precautions carefully for your safety.

Power Source

The TV set should be operated only from a

220-240 V AC, 50 Hz outlet. Ensure that you

select the correct voltage setting for your

convenience.

Power Cord

Do not place a piece of furniture etc. on the

power cord (mains lead) or pinch the cord.

Handle the power cord by the plug. Do not

unplug the appliance by pulling from the

power cord and never touch the power cord

with wet hands as this could cause a short

circuit or electric shock. Never make a knot in

the cord or tie it with other cords. The power

cords should be placed in such a way that

they are not likely to be stepped on. A damaged

powe r cord can cause fire or give yo u an

electric shock. When it is damaged and needs

to be replaced, it should be done by qualified

personnel.

Moisture and Water

Do not use this device in

a hum i d a n d d amp

plac e (av o i d th e

bathroom, the sink in the

ki tchen, an d nea r the

washing machine). Do

not expose this device to

rain or water, as this may be dangerous and

do not place objects filled with liquids, such

as flower vases, on top. Avoid from dripping

or splashing.

If any solid object or liquid falls into the cabinet,

unplug the TV and have it checked by qualified

personnel before operating it any further.

Cleaning

Before cleaning, unplug

the TV set from the wall

outlet. Do not use liquid or

aerosol cleaners. Use soft

and dry cloth.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:334

English - 4 -

Ventilation

The slots and openings on the TV set are

intended for ventilation and to ensure reliable

oper at ion. To prevent overheating, these

openings must not be blocked or covered in

anyway.

Heat and Flames

The set should not be placed

near to op en fla m e s a nd

sources of intense heat such as

an electric heater. Ensure that

no open flame sources, such as

lighted candles, are placed on top of the TV.

Batteries should not be exposed to excessive

heat such as sunshine, fire or the like.

Lightning

In case of storm and lightning

or when going on holid a y,

disconnect the power cord from

the wall outlet.

Replacement Parts

When replacement parts are required, make

sure that the service technician has used

replacement parts, which are specified by the

manufacturer or have the same specifications

as th e orig i n a l one. U nauthori z ed

substitutions may result in fire, electrical shock

or other hazards.

Servicing

Please refer all servic ing to

qu a lifi ed per sonn el. Do not

remove the cover yourself as

this may result in an electric

shock.

Waste Disposal

Instructions for waste disposal:

• Packaging and packaging aids are recyclable

and shou l d p r i n c ipally b e rec y c led.

Packaging materials, such as foil bag, must

be kept away from children.

• Batteries, including those which are heavy

metal-free, should not be disposed of with

household waste. Please dispose of used

battery in an environment friendly manner.

Find out about the legal regulations which

apply in your area.

• Cold cathode fluorescent lamp in LCD

PANEL contains a small amount of mercury;

please follow the local laws or regulations

for disposal.

Information for Users in European Union Countries

This symbol on the product or

on its packaging means that

your electrical and electronic

device should be disposed at

the end of its se rvice l i fe

sepa r a tely fro m yo u r

household wastes. There are

separate collection systems for recycling in

EU.

For more information, please contact the local

authority or the dealer where you purchased

the product.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:335

English - 5 -

Disconnecting the Device

The mains plug is used to disconnect TV set

from the mains and therefore it must remain

readily operable.

Headphone Volume

Excessive sound pressure from

ear p h ones and headph o n e s

can cause hearing loss.

Installation

To prevent injury, this device must be securely

attached to the wall in accordance with the

installation instructions when mounted to the

wall (if the option is available).

LCD Screen

The LCD panel is a very high technology

pro d u c t with abou t a mi l l i o n thin f i l m

transistors, giving you fine picture details.

Occasionally, a few non-active pixels may

appear on the screen as a fixed blue, green

or red point. Please note that this does not

affect the performance of your product.

Warning

Do not leave your TV in standby or operating

mode when you leave your house.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:336

English - 6 -

Overview of the Remote Control

EXIT

-/--

INFO

I-II

TV/DTV

P/CH

GUIDE

P<P/SWAP

Standby

Direct Programme

External Source

Info

Programme Up/

Programme Down

Okay / Freeze Picture

Cursor buttons

Green / Picture / Page Down

Red / Sound / Page Up

Time (in TXT mode) /

Subtitle on-off

Teletext

Mix (in TXT mode) / PIP mode

Image size / Expand (in TXT

mode)

Previous Programme

Personal Preference

Reveal (in TXT mode)

Index Page (in TXT mode) / Electronic Programme Guide

(EPG)

Update (in TXT mode) / PAP

mode

Hold (in TXT mode) / PIP position

Blue / Install

Yellow / Feature

TV / Digital TV

Mono-stereo / Dual I-II

Volume + / Volume -

No function

Mute

ABC DEF GHI

1 2

JKL MNO PQR

STU VWX

7 8

SOURCE

WIDE

English - 7 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:337

LCD TV and Operating Buttons

TV/AV

button

Volume Up/

Volume Down buttons

Programme Down buttons

Standby button

TV/AV

P/CH

Programme Up/

English - 8 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:338

Viewing the Connections

REAR VIEW

RF Input connects to an antenna or a cable.

Note that if you use a decoder or a media recorder, you should connect the aerial cable

through the device to the television with an appropriate antenna cable, as shown in the

illustration below.

Video Input is used for connecting video signals of external devices.

Connect the video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on

your device.

Audio Line Outs output audio signals to an external device such as an optional sound

system.

To connect the external speakers to your TV, use AUDIO LINE OUTS of the TV with an audio cable.

YPbPr Audio Inputs are used for connecting audio signals of a device that connects to the

TV via YPbPr.

Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device

to enable component audio.

Component Video Inputs (YPbPr) are used for connecting component video.

You can connect the component video and audio sockets with a device that has component

output. Connect the component video cables between the

the TV and the component video outputs of your device.

letters on your TV, “

SCART 2 inputs or outputs for external devices.

Y”, “Pb”, “Pr” correspond with your device’s connectors.

English - 9 -

COMPONENT VIDEO INPUTS on

While connecting, be sure that the

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:339

Headphone jack is used for connecting an external headphone to the system.

Connect to the HEADPHONE jack to listen to the TV from headphones (optional).

Audio Inputs are used for connecting audio signals of external devices.

Connect the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT

jacks on your device.

Note: If you connect a device to the TV via the VIDEO INPUT, you should also connect your

device with an audio cable to the AUDIO INPUTS of the TV to enable audio.

CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you

subscribe to. For more information, see “

Common Interface” section.

Subwoofer Out is for connecting an external, active subwoofer to the set to give a much

deeper bass effect.

Use an appropriate RCA cable to connect the set to a subwoofer unit.

S/PDIF Out is used for transferring digital audio signals. Use an RCA cable to transfer

audio signals to a device that has S/PDIF input.

SCART 1 inputs or outputs for external devices.

Connect the

SCART cable between SCART sockets on TV and SCART socket on your external

device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART sockets, the TV will automatically

switch to AV mode. If both sockets are employed at the same time,

SCART 1 will override

SCART 2 unless manually selected.

HDMI Inputs are for connecting a device that has an HDMI socket.

Your LCD Television is capable of displaying High Definition pictures from devices such as a

High Definition Satellite Receiver or DVD Player. These devices must be connected via the

HDMI sockets or Component Socket. These sockets can accept either 720p or 1080i signals.

No sound connection is needed for an HDMI to HDMI connection.

Note(optional) : When it is desired to watch HDMI-1 and HDMI-2 source with a DVI to HDMI

cable, in order to enable audio, there are two options that can be used:

- When you want to connect DVI and HDMI 1, the audio signal line must be connected to audio

input in the component terminal (YPbPr).

- When you want to connect DVI and HDMI 2, the audio signal line must be connected to PC

audio input.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3310

English - 10 -

Power Connection

Aerial Input

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you

connect the set to the mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3311

REAR VIEW

English - 11 -

Connecting to a DVD Player

SCART

cable

HDMI

cable

Component

Scart sockets

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD

players may have different connectors. Please refer to your DVD player’s instruction book for

additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD

player as illustrated below, switch to HDMI source. See, “

• Most DVD players are connected through

COMPONENT SOCKETS. Use a component video

cable to connect video input. For enabling audio, use a component audio cable as illustrated

below. When the connection is made, switch to YPbPr source. See, “Input selection” section.

• You may also connect through the

SCART 1 or SCART 2. Use a SCART cable as shown

below.

Component

video

inputs

REAR VIEW

Component

audio inputs

Input Selection” section.

HDMI inputs

Component

video cable

audio cable

Note: These three methods of connection perform the same function but in different levels of

quality. It is not necessary to connect by all three methods.

English - 12 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3312

Using Other Connectors

Headphones

Subwoofer

External speakers

You can connect a range of optional equipment to your LCD TV. Possible connections are

shown below.

•

For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For

selecting the related source, see the section “

• To connect external speakers, use an audio cable. Do not reverse the

AUDIO RIGHT jacks. Turn on the LCD TV and external speaker set after all connections are

made. Refer to your speaker set’s manual for further queries.

• To listen the sound from headphones, connect to the

• For connecting a subwoofer, connect to the

Note that cables shown in the illustration are not supplied.

Input selection” in the following parts.

AUDIO LEFT and

HEADPHONE jack of theTV.

SUBWOOFER OUT.

Camcorder

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3313

English - 13 -

Connecting Other Equipment via Scart

VCR

DVD Recorder

Decoder

Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder

to your LCD TV by using the SCART sockets. Note that cables shown in the illustration are not

supplied.

Power off both the TV and the devices before making any connections.

For more information, refer to your device’s own instruction book.

SCART sockets

REAR VIEW

English - 14 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3314

Inserting Batteries in the

ABC

DEF

GHI

JKL

MNO

PQR

STU

VWX

P<P/SWAP

TV/DTV

GUIDE

Remote Control Handset

• Remove the battery cover located on the back

of the handset by gently pulling backwards

from the indicated part.

• Insert two

in side . Pla ce the batterie s in the right

directions and replace the battery cover.

AAA/R3 or equivalent type batteries

Operating Range for the Remote Control

• Point the top of the remote control toward

the LCD TV's remote sensor LED while

pressing a button.

Note: Remove the batteries from the remote

control when it is not going to be used

for a l o ng t i m e. O t h erwis e t h e

batteries may leak and damage the

controller.

1 2

7 8

-/--

SOURCE

EXIT

INFO

I-II

P/CH

WIDE

Remote range is approximately 7m/23ft.

English - 15 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3315

Switching the TV On/Off

UKOkCancel

PLEASE CHECK ANTENNA CABLE

To Switch the TV On

• Connect the power cord to the 220-240V AC

50 Hz.

• Press STANDBY button. Then the standby

LED lights up.

• To switch on the TV from standby mode either:

• Press the

numeric button on the remote control.

• Press the

The TV will then switch on.

No t e: If y ou swi t c h on y our T V via

PROGRAMME UP/DOWN buttons on the

remo te control or on the TV set, the

programme that you were watching last

will be reselected.

By either method the TV will switch on. When

the TV is operated for the first time, th e

following screen appears:

button, P/Ch+, P/Ch- or a

-P/CH or P/CH+ button on the TV.

To Switch the TV Off

• Press the button on the remote control or

STANDBY button on the TV, so the TV will

switch to standby mode.

• To power down the TV completely, unplug

the power cord from the mains socket.

Input Selection

Once you have connected external systems

to your TV, you can switch to different input

sources.

• Press

or,

• Select “

“AV” button on your remote control for

directly changing sources.

Source” option from the main menu

by using

or button. Use then or

button to highlight an input and press

button to select.

Auto Program

Country

Language

TXT Language

AUTO. PROGRAMMING SYSTEM

By pressing “ ” or “ ” button, adjust the

Country item and press “ ” to hi ghlig ht

“Language” item. Use “ ” or “ ” button to

“Language”. Use “ ” or “ ” buttons to

set

select

“TXT Language” and set it by using ”

” buttons. Press “OK” button to continue.

or “

English - 16 -

SOURCE

DTV

EXT-1

EXT-2

EXT-2 S

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3316

Basic Operations

You can operate your TV using both the

remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press - button to decrease volume or

+ button to increase volume, so a volume

level scale (slider) will be displayed on the

screen.

Programme Selection

• Press P/CH + button to select the next

programme or

previous programme.

Viewing Main Menu

• Press the MENU button to enter main menu.

In the Main menu select sub-menu using

CH -

or P/CH + buttons and enter the sub-

menu using

the usage of the menus, refer to the menu

system sections.

AV Mode

• Press the TV/AV button at the control panel

on the TV to switch your TV to AV modes.

Operation with the Remote Control

• The remote control of your TV is designed to

control all the functions of the model you

selected. The functions will be described in

accordance with the menu system of your

TV.

• Functions of the menu system are described

in the following sections.

P/CH - button to select the

- or + buttons. To learn

Volume Setting

Press + button to increase the volume.

Press

- button to decrease the volume. AA

volume level scale (slider) will be displayed

on the screen.

Programme Selection (Previous or Next Programme)

• Press P/CH - button to select the previous

programme.

• Press P/CH + button to select the next

programme.

Programme Selection (Direct Access)

•Press numeric buttons on the remote control

to select programmes between 0 and 9. The

TV will switch to the selected programme.

To select programmes between 10 - 999 (for

IDTV) or 10-99 (for analogue), press the

numeric buttons consecutiv ely (e.g. for

programme 27, first press 2 and then 7).

When the pressing time is due for the second

numeric button, only the first digit programme

will be displayed. The limit of the delay time

is 3 seconds.

• Press directly the programme number to

reselect single digit programmes.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3317

English - 17 -

Initial Settings

DOkCancel

PLEASE CHECK ANTENNA CABLE

When the TV set is operated for the first time,

the IDTV turns on first.

Because this is the first time the TV is used, there

are no channels stored in the memory and the

following message appears on the screen:

Please ensure aerial is plugged in.

Do you want to start automatic search?

Yes

• To start installation process, select “Yes”,

to cancel select “No”.

• To select the “Yes” or “No” option, highlight

the item by using

the

OK button.

The IDTV will automatically tune to the UHF

transmissio n channels 21 to 68, searching

fo r dig ital terrest ria l TV broadcas ts and

displaying the names of channels found. This

process will take about five minutes. To cancel

searching, you can press the MENU button at

any time during the process.

AUTOMATIC SEARCH

Channels:

BBC ONE BBC TWO BBC CHOI CE

Searching UHF channels 30. Please wait. This will take a few minutes

12 %

Cancel search

After Automatic Search is completed, the

following message asking for analogue channel

search appears on the screen:

Do you want to search for analogue channels?

Yes

To searc h fo r analo gue chann els, select

“Yes”. TV switches to the analogue TV mode.

or buttons and press

The menu below is displayed to search for

analogue channels:

Country

Language

TXT Language

AUTO PROGRAMMING SYSTEM

Select your Country, Language and Text

language

Press

press the

by using or and  /  buttons.

OK or RED button to continue. To cancel,

BLUE button.

For more information on this process, see

“Install Menu” section.

NOTE: For proper functioning of digital teletext

in DTV mode, you should set

country

as UK in analogue AUTO PROGRAM.

General Operation

Pressing the TV/DTV button at any time while

watching television programmes will switch

the TV set between the d igital ter restrial

tel e v ision b r oadcas t i n g and it s norm a l

analogue broadcasting.

Information Banner

• Whenever you change channel, using the P-

/ P+ button or the numeric buttons, the TV

displays the broadcast picture along with an

information banner at the bo ttom of the

screen. This will remain on the screen for

approximately three seconds.

• Th e i n f o rmati o n b a nner can a lso be

displayed at any time while watching TV by

pressin g the

but ton on the remo te

English - 18 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3318

control:

Chuckle Vision 13:00-14:00

Change

Change Time

Now: 50/50 Next: Ace Lighting

1. BBC ONE

Signal Level:

09:25 - 11:00 11:00 - 11:25

13:15

• The inf orma tion banner gives information

on th e c h a n nel selec t e d a n d the

programmes on it. The name of the channel

is displayed, along with its cha nn el list

number and an indication of the strength of

the signal received.

Hin t : Not a ll cha n n e ls bro a d c a s t th e

programme data. If the name and time

of the programme are not availab le,

then “

No Information Available” will be

displayed in the information banner.

• Icons are also displayed in the information

banner and if this channel is a favourite

channel, favourite channel icon “ ” will

also be displayed.

If the selected channel is locked, you must

enter the correct four numeric code to view

the chan n e l . “E nter Lock Key” wi l l be

displayed on the screen in such a case:

Enter Lock Key

• In the EPG menu, all channels are displayed.

Current channel is highlighted. Use

buttons to change channels. Also press

GREEN/RED buttons to scroll up/down the

pages for the channels.

• If you high l ight an event , short event

description, extended event description, start

and end times of the event will be displayed

on the screen.

• If you press the

OK button when a next event

is highlighted , a reminder is set for the

highlighted programme and a clock appears

across the highlighted channel line.

Programme reminders can be set to signal

that a programme is about to start when you

are watching anoth er channel. If you set

reminder for a programme, then you will be

asked for switching to that channel when the

reminder time is reached.

• Press the MENU button to view the 7 day

EPG.

• Press or button to navigate in Channels

or Programmes.

• Press

or button to navigate through the

channel and programme list.

Electronic Programme Guide (EPG)

• Some, but not all, channels send information

about the current and next events.

• Please note that event information is updated

automatically. If there is no event information

data available in channels, only channel

names with

banner is displayed.

• Press

• In EPG menu, you can easily see the extended

help information by pressing

• Press this button again to close this window.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3319

“No Information Available”

GUIDE button to view the EPG menu.

button.

• With RED/GREEN buttons, you can change

the schedule time. By pressing

BLU E

backward/forward of a day.

English - 19 -

ELECTRONIC PROGRAMME GUIDE(7 Day) Saturday 21/8 13:49

Triple bill. In the Ring/Romany Days/On the Radio: Paul and Barry grapple with the world of wrestling; hunt for a mysterious Emperor's underpants; and record their first pop song.

Channels Programmes on Saturday 21/8, 13:00 - 15:00

30. CBBC Channel 13:00 Chuckle Vision (Now)

40. BBC NEWS 24 14:00 Tracy Beaker

41. ITV News 14:55 Newsround

50. Four Text

800. BLUE/LEFT 1k...

801. CCIR17/1kHz...

Navigate

Day

YELLOW/

you can ad vance the sc hedule

• If you press button you can see the

Change

Change Time

Interactive services cannot be used

while subtitles are on. Would you like

detailed help information easily. Press

button again to exit help menu.

• The starting time for

EPG is the current time.

You can see the event information for the

next two hours. By pressing or button,

you can go to the next/previous hours while

Programmes list is highlighted.

• lf you press the

OK button when a next event

is highlighted , a reminder is set for the

highlighted programme and a clock appears

on the screen.

• Programme reminders can be set to signal

that a programme is about to start when you

are watching another channel. If you set

reminder for a programme, then you will be

asked for switching to that channel when the

reminder time is due.

ELECTRONIC PROGRAMME GUIDE(7 Day) Saturday 21/8 13:51

Newsround 16:55-17:00

CBBC joins the Newsround team, keeping you up to date on the latest stories and eve nts happening at home and abroad.

Channels Programmes on Saturday 21/8, 15:00 - 17:00

30. CBBC Channel 15:00 Even Stevens

40. BBC NEWS 24 15:50 Newsround Showbiz

41. ITV News 16:00 Basil Brush

50. Four Text 16:55 Newsround

51. BBCI

800. BLUE/LEFT 1k...

801. CCIR17/1kHz...

DayNavigate

Displaying the Subtitles

With digital terrestrial broadcasting (DVB-T),

some p r o g rammes a r e broadc a s t with

subtitles. Subtitles can be displayed while

watching these programmes.

Press the

menu, highlight the

or button and press the OK button to

display the configuration menu.

Highlight the “Subtitle” item in configuration

menu and use

Off or a language.

MENU button to display the main

Configuration line using

or button to set Subtitle to

English - 20 -

“Subtitle” is on and a language option is

se t, pres sing the

bu tto n ca uses the

following warning message display on the

screen:

to turn subtitles off now?

NoYes

Digital Teletext

With digital terrestrial broadcasting (DVB-T),

in addition to pictures and sound, you can also

view digital teletext.

Digital teletext is sometimes broadcast at the

same time with the normal broadcasting.

• Press the

• The digital teletext information appears.

• Operate it with the coloured buttons, / / /

buttons and OK button.

The operation method may differ depending

on the contents of the digital teletext.

Follow the instructions displayed on digital

teletext screen.

• When “

message appears on the screen, press the

OK button.

• When the

TV returns to television broadcasting.

• With digital terrestrial broadcasting (DVB-

T), in addition to digital teletext broadcasting

together with the normal broadcasting, there

are also channels with just digital teletext

broadcasting.

• The aspect ratio (picture sha pe) when

watching a channel with just digital teletext

broadcasting is the same as the aspect ratio

of the picture viewed previously.

• When you press the

the digital teletext screen will be displayed.

button.

Press SELECT” button or similar

(Text) button is pressed, the

(Text) button again,

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3320

Over Air Download

Configuration

To ensure that your IDTV always has the most

up-to-date information, please ensure that,

after use, it is set to standby mode. At 3 A.M.

each day, the IDTV automatically searches for

any updates which may be broadcast and will

download this to your IDTV automatically. This

operation will normally take approximately 30

seconds.

If you want to perform this, you need to set

Automatic Download to

“Enabled” in Receiver

Upgrade setting.

Widescreen

Depending on the type of the broadcast being

transmitted, programmes can be viewed in a

number of formats. Press the WIDE button

repeatedly to select between

Panoramic, 14:9 Zoom, Cinema

When Auto is selected, the format being

displayed is determined by the picture being

broadcast.

PLE A S E N O T E: Me n u size change s

depe n d ing o n the

chosen image size.

Auto, 16:9, 4:3,

or Subtitle.

IDTV Menu System

The IDTV menu can only be viewed when

watc hing dig ita l terrestrial broa dca sti ng.

Press the TV/DTV button to turn IDTV on while

the TV is in analogue mode.

Press the

appears on the screen:

Channel List

Using the or button on the remote control,

make sure that the first item, Channel List, is

highlighted and press the OK button to display

Channel List.

the

The following op erations can be performed

in this menu:

• Navigating the entire list of channels

• Deleting channels

• Renaming channels

• Adding locks to channels

• Setting favourites

Channel List is the place where the channels

are managed.

MENU button. The menu below

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

English - 21 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3321

SELECT

CHANNEL LIST 1 BBC ONE

1. BBC ONE

SELECT

CHANNEL LIST 1 BBC ONE

SELECT

CHANNEL LIST 1 BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Watch More

Navigating the Entire Channel List

Press or button for selecting the previous

or next channel. You can press

RED or GREEN

button to move page up or page down.

To watch a specific channel, highlight it using

or button and then press OK button, while

Select” item on Channel List menu is

the “

highlighted by using

or button.

Then the name and number of the selected

channel will be displayed in the top-left and

top-right of the channel display at the top-right

of the screen, respectively.

Deleting the Channels in the Channel List

Press or button to select the channel

that will be deleted.

Press or button to select the “Delete’’

item on Ch ann el List menu. As seen on

Channel List menu, SELECT is displayed next

Delete item at the bottom of the screen to

indicate that you must press the

delete the highlighted channel in the channel

list.

OK button to

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Delete More

Press the OK button to delete the highlighted

channel in the channel list. Then the message

below appears on the screen:

The selected service will be permanently deleted. Are you sure?

Yes No

Press or button to highlight the desired

option. If

OK button is pressed while “Yes” is

high l i g hted, the hi g hlighted channe l is

deleted. Selecting “No” cancels the deletion.

Renaming Channels

To rename a specific channel, the channel

must be highl ighted by pressing

button. Then highlight the Edit Name item by

pressing

Press the

or button as illustrated below..

OK button to activate the rename

feature.

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Edit Name More

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3322

Now pressing or button moves to the

previous/next character. Pressing

button toggles the current character, i.e., ‘b’

English - 22 -

character becomes ‘a’ by and ‘c’ by .

SELECT

CHANNEL LIST 1 BBC ONE

SELECT

CHANNEL LIST 1 BBC ONE

Press the SELECT button on your remote control to tune to the

Pressing the numeric buttons ‘

0...9’ replaces

the highlighted character with the characters

printed above the button one by one as the

button is pressed.

Press the

OK button to save the new name.

MENU button to cancel the editing

Adding Locks to Channels

Cha n n e l lock i n g prov i d e s a pa s s word-

protected access to channels selected by

parents. In order to lock a channel you should

know the parental loc k password (default

value is set to 0000 in the factory and can only

be changed from the

Select the channel to be locked by highlighting

it and select the Lock option by pressing or

button. When the OK button is pressed, a

dialog OSD asking for the password will be

displayed.

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Enter Lock Key

Configuration menu).

Select Channel Lock/Unlock More

Setting Favourites

You can set various channels as favourites

so th at only the fav ourit e chan n els are

naviga ted. To set a favo urite you should

highlight the

Favourites item at the bottom of

the Channel List menu.

Us e the or butto n to hig hlig ht the

“Favourites” item at the bottom of the screen

and then, in turn, highlight each channel you

want to add to the favourites list, using the

and bu ttons (or red/green buttons), and

press the

OK button.

A channel selected as a favourite appears in

the main channel list with a favourites icon

(

) against the channel name as illustrated

below:

1. BBC ONE

2. BBC TWO

3. ITV 8

4. Channel 4

5. BBC THREE

6. Teletext

7. BBC FOUR

8. Sky Travel

9. UKHistory

10. RTL

Select

Delete Edit Name Lock Favourites

Function

Select Channel Add/Remove... More

On Screen Help

For all menus, press the button to display

the help information about the menu functions.

For Ch a nnel L i st m enu t h e f o l lowin g

message is displayed on the screen:

Enter the pass word by using the numeric

buttons on the remote control. The lock icon

“ ” will now be displayed next to the selected

channel. Repeat the same operation to cancel

the lock.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3323

highlighted channel. Press MENU to exit this screen.

Installation

The Installation menu is mainly intended to

help you for creating a

most efficient way.

English - 23 -

Channel Table in the

Main Menu

Configuration

First Time Installation

Channel List

Installation

Timers

Language

TV Setup

Common Interface

This menu includes the following items:

• Add New Channels.

• First Time Installation.

Add New Channels

This tuning menu consists of two parts:

• Automatic Search

• Manual Search

Installation

Add New Channels

First Time Installation

Automatic Search

Automatic search is started by pressing the

OK button in the auto-search pop up menu.

All the services will be searched and a channel

table will be created automatically.

All channels found are stored in a sorted form

with respect to their channel numbers. Some

services may not appear with the correct

chann el number. Thi s may occ ur due to

missing information when the broadcaster

does not transmit any channel information.

Manual Search

In manual search, the number of the multiplex

is entered manually and only that multiplex is

searched for the channels. For every valid

Automatic Search

Manual Search

channel number, signal level, signal quality

and network name are shown at the bottom

of the screen.

In both manual and auto search, any existing

channel in the database is not re-stored to

avoid redundant duplicates of that channel.

First Time Installation

The user can use this item to load default

settings, which were loaded to the receiver at

the factory.

To install factory settings, highlight

Installation”

menu and press the OK button.

Installation

Add New Channels

“First Time

Then you will be asked to confirm for deleting

all channels and settings:

Your previous digital channel list will be destroyed. Are you sure you want to delete all digital channels and settings for first time installation?

Yes

By selecting Yes and pressing the OK button,

the existing channel table will be deleted.

After factory settings are loaded, “First Time

Installation

” menu will be displayed:

Please ensure aerial is plugged in.

Do you want to start automatic search?

Yes

Press the OK button to start installation. After

search is completed for digital channels , a

mess a g e as k i n g wh ether to searc h for

analogue channels appears on the screen:

Do you want to search for analogue channels?

Yes

Press the OK button to search for analogue

channels. The following menu appears on

the screen for analogue channel search:

English - 24 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3324

DOkCancel

PLEASE CHECK ANTENNA CABLE

P 03 - C 04

Cancel

APS is running...

display the configuration menu. Press the

Configuration

CONFIGURATION

Parental Settings

Change Default Audio Language

MENU button to leave the menu screen.

Country

Language

TXT Language

AUTO PROGRAMMING SYSTEM

Select your Country, Language and Text

language

Press

press

by using or and  /  buttons.

OK or RED button to continue. To cancel,

BLUE button. The following menu will

be displayed during the automatic tuning:

63.75 MHz

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

Th e var ious con figu rati on func t ions are

displayed in a list, along with a quarter-screen

image of the currently selected channel. You

can select a function by highlighting the

corresponding menu line using the or

button. Configuration menu will look like this:

Audio Language Subtitle Favourite Mode EPG Preference Receiver Upgrade

English Off Off Now&Next V.1.5

63.75 MHz

After APS is finalized, the programme table

will appear on the screen. In the programme

table you will see the programme numbers

and names assigned to the programmes.

If you do not accept the locations and/or the

programme names, you can change them in

the program table.

Configuration

Press the MENU button to display the main

menu and press the

Configuration. Then press the

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3325

button twice to highlight

OK button to

Audio Language

Digital terre strial television c hannels can

broadcast simultaneous soundtracks in more

than one language. This function selec ts

which languag e sou ndtrack you will hear

when switching to a channel broadcasting with

the multiple soundtracks.

Highlight the

Configuration menu and use the or

button to cycle through the language options.

Subtitle

Digital terre strial television c hannels can

broadcast subtitles displayed on the screen

English - 25 -

Audio Language line in the

for har d-of-hearing peopl e. This functi on

CONFIGURATION

Parental Settings

selec ts the desired subtitle language and

ena bles the automatic dis play of subtitles

whenever subtitle information is broadcast.

Highlight the

menu and use the

through

Subtitle line in the Configuration

or button to cycl e

“Off” and language options.

Favourite Mode

This function enables or disables the favourite

channel list mode.

Use or button to turn on/off favourite

mode. If the

normal operating mode, pressing

“Favourite Mode” is on; while in

P/CH+ and

P/CH- buttons will only navigate through the

channels that were previously defined as

favourites in the channel list.

EPG Preference

Digital terre strial television c hannels can

broadcast simultaneous Next&Now and 7-

Day electronic programme.

Highlight the

EPG Preference line in the

Configuration menu and use the or

button to select Next&Now or 7-Day.

Receiver Upgrade

Th e I D T V c an b e u p g raded via the

configuration menu, entered from the main

menu.

In the config ura tion menu , hig hlig ht th e

“Receiver Upgrade” item by pressing or

button and press the OK button to start

upgrade process.

There are two options for receiver software to

be upgraded:

automatic and manual.

Audio Language Subtitle Favourite Mode EPG Preference Receiver Upgrade

Automatic Download Search for New Version

Exit

English Off Off Now&Next V.1.5

Enabled

Automatic Download (Automatic Upgrade)

Au toma tic Down load can be enab led or

disabled by pressing

or button. If it is

enab l e d, t h e n t h e re a r e t wo ways f o r

automatic upgrade:

• The first one is checking the existence of a

new software every time the IDTV goes to

standby.

• The second one is being activated at 03:00

A.M. every night, provided that the IDTV is left

in standby mode.

• Both automatic upgrade methods result in

standby mode either the upgraded or not.

If the automatic upgrade is set to “

Disabled”

then this function will not work.

Search for New Version (Manual Upgrade)

Manual upgrade starts if the “Search for New

Version”

item is highlighted by using or

button and activated by pressing the OK

button.

After

“Search for New Version” is activated,

the IDTV tunes to each frequency that have

been stored in its database and looks for the

new so f twa r e. Duri n g th is proc e s s, the

following OSD is displayed:

Software Upgrade

Searching for upgrade. Please wait, or press MENU to cancel.

Search Progress:

English - 26 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3326

Parental Settings

Wrong Lock Key

Installation

Configuration

SELECT

No Channel Name Start End Date Mode

1. ITV 1 20:00 21:00 12/05/2005 Active

Some channels broadcast material which you

do not want younger members of the family to

watch. Any channel can be ‘locked’ so that it

cannot be selected for viewing unless a four-

digit PIN code is entered. In this way, any

channel not suitable for younger viewers can

be prohibited.

This function enables or disables the menu

protection system and allows the PIN code to

be changed.

Use

or button to highlight Parental

Settings

Parental Settings menu. A dialog box asking

for the lock key is displayed:

There is only one key which is set to “0000”

initially. Enter lock key. If wrong lock key is

entered, the following message is displayed

and the TV then returns to the previous menu:

If it is correct, the Parental Settings menu will

be displayed including the following items:

Here, you can set/reset locking for the main

menu or the installation menu to restrict

access. If the menu lock is disabled, there

will be free access to the menu system. Also

in this menu you can change the lock key and

set/change parental lock mode.

Disabled: All menus are unlocked.

Main Menu: Main menu is accessible only with

option. Press the OK button to enter

Enter Lock Key

Menu Lock

Set Lock Key

the correct lock key. So the user

cannot add, delete, rename, or

move the channels and cannot

set the timers.

Installation: Installation menu is locked, so

the user cannot add channels.

Note: Changes will be updated after exiting

configuration menu.

Timers

You can set a timer to switch the TV to any

channel without your intervention. This is also

useful for recording the programmes when

you are out.

Display the main menu by pressing the MENU

button. Highlight the Timers line by pressing

or button and press the OK button to

display the Timer menu:

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

Up to five separate timer events can be set

and each is displayed in the Timer screen,

showing the event number, the channel to be

selected, the start time, end time, date and

the mode - whether that event is active (and

will be acted on) or not.

TIMER MENU

2. BBC ONE 00:00 00:00 01/01/2005 Inactive

3. BBC ONE 00:00 00:00 01/01/2005 Inactive

4. BBC ONE 00:00 00:00 01/01/2005 Inactive

5. BBC ONE 00:00 00:00 01/01/2005 Inactive

6. BBC ONE 00:00 00:00 01/01/2005 Inactive

Toggle Mode

Edit Timer More

Exit

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3327

English - 27 -

• To set an event, highlight its mode button

Name:

Configuration

using the

or button and press the OK

button to display the timer entry window.

3. ITV 1 Start: End: Date: Mode:

00:00 00:00 03/06/2005 Once

• Here the five settings con sisting of the

channel name, start time, end time, date and

frequency mode can be set. You can move

freely between each setting using the

buttons.

• The channel name is set using the

butt o n to display the channe l whi c h

broadcasts the programme.

• The start time, end time and date are each

set with the numeric buttons on the remote

control in 24-hour format.

• The frequency mode determines how often

the receiver operates this event and is set

with the

or button to be either Once,

Daily, or Weekly.

If an invalid number for the start or end times

or the date is entered, “Entered time is not

mes s a g e appea r s on th e menu

va l i d”

screen.

If timer action occurs while the TV is being

watched, the TV switches to the selected

channel. When timer expires, the TV switches

back to the channel which it is switched from.

Selected digital channel will be output via

Scart-2. You should connect your VCR to Scart-

2 for recording digital broadcasts.

Language

Some programmes are broadcast in two or

more l a n g uages sim u l taneo u s l y. The

languag e thus can be selec ted from the

Language menu.

• Press the MENU button to display the main

English - 28 -

menu and use

Language line and press the

or button to highlight the

OK button:

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

• Use the or button to highlight the

soundtrack language required and press the

OK button. Normal viewing, with the required

language soundtrack, can be resumed by

pressing the MENU button.

Languages

English

TV Setup

You can use this ite m to display the TV

functions.

Th e d i g i tal T V S etup m e n u s c r een i s

accessed from the main menu. Press the

MENU button to display the main menu and

or button to highlight “TV Setup”,

use

press the

screen.

OK button to display TV Setup menu

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3328

You can find detailed information for all menu

Configuration

items in “Analogue TV Menu System” section.

Common Interface

• Press the MENU button to display the main

menu and use the

“Common Interface” line and press the

the

OK button:

Some Digital Terrestrial channels operate on

a Pa y Per Vi ew ba sis. These requi re a

subscription and a hardware decoder.

Obtain the Conditional Access Module (CAM)

and the viewing card by subscribing to a pay

channel company, then insert those to the TV

using the following procedure.

• Switch off the TV and unplug from the mains.

• Insert the CAM and then the viewing card to

the slot that is located in the terminal cover

at the left-hand side of the TV (from front

view).

• The CAM should be correctly inserted, it is

impossible to insert fully if reversed. The

CAM or the TV terminal may be damaged if

the CAM is forcefully inserted.

• Connect the TV to the mains supply, switch

on and then wait for few moments until the

card is activated.

or button to highlight

Main Menu

Channel List

Installation

Timers

Language

TV Setup

Common Interface

• Some CAMs may require the following set

up. Please set the CAM by entering the IDTV

menu, Common Interface then pressing the

OK butt o n . (C A M set up menu is not

displayed when it is not required.)

• To see the viewing contract information: enter

IDTV; press the

MENU button, then highlight

Common Interface and press the OK button.

• When no module is inserted, “

Inte rface module detected

No Common

” message

appears on the screen.

• Refer to the module instruction manual for

details of the settings.

English - 29 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3329

Navigating the Analogue TV

To Confirm Choices

PICTURE

Contrast

Brightness



Menu System

For Navigation

Analogue TV Menu System

Picture Menu

For Displaying Menu Options

MENU TV/DTV

• Press MENU to display the main menu.

• Press or button to select an icon.

• Use or button to highlight.

• Press or buttons to change the settings.

• Press

for more options.

OK to store.

• To exit the menu or return from sub-menu

screen, press

MENU.

Note: These explanations are valid for the

navigation of the analogue TV menu

sy stem. To select options that are

explained in the following parts, refer to

“Navigat in g the Analogue TV Menu

System”.

Mode

Sharpness

Colour

Mode

For your viewing requirements, you can set

the related

Press

mode option.

or button to select Mode. Press

or button to choose from one of these

options:

Cinema, Dynamic and Natural.

Contrast/Brightness/Sharpness/Colour/ Hue

Press or button to se lect the desired

option. Press

/  button to set the level.

Note: Hue option can only be visible when

the TV receives an NTSC signal.

Colour Temp

Press or button to select Colour Temp.

Press

options:

Note:

• Setting

• Setting Warm option gives white colours a

• For normal colours, select Normal option.

/  to choose from one of these

Cool, Normal and Warm.

Cool option gives white colours a

slight blue stress.

slight red stress.

English - 30 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3330

Noise Reduction



/ 



Sound Mode



If the broadcast signal is weak and the picture

is noisy, use

Noise Reduction setting to

reduce the noise amount.

Pre s s or b u t ton to s elect N o i se

Reduction

these options:

. Press  /  to choose from one of

Low, Medium, High or Off.

Game Mode (optional)

Select Game Mode by pressing or button.

/  button to set Game Mode as On or

Use

Off. When Game Mode is set to On, specific

game mode settings, which are optimized for

better video quality, will be loaded.

Also; Picture Mode, Contras t, Brightness,

Sharpness, Colour and Colour Temp settings

will be invis ible and disabled while Game

Mode is on.

Note:

-Picture mode selection button on the remote

control will have no function while Game Mode

is on.

-If the TV is switched to PIP/PAP mode, Game

Mode setting will be disabled and be removed

from the Picture menu.

Film Mode

Films are recorded at a different number of

fr ames pe r seco nd to no rmal te levision

program me s.

Press

or button to select Film Mode.

/  button to set this feature On or Off.

Turn this feature on when you are watching

films to see the fast motion scenes clearly.

3D Comb

3D Comb is used to improve colour transitions

and colour quality of pictures.

Select

3D Comb by pressing  /  button.

Press

Note: 3D Comb feature is not functional in SECAM

/  button to set this feature On or Off.

picture mode.

English - 31 -

Picture Zoom

Select Picture Zoom by pressing  /  button.

Use

/  buttons, to change picture zoom to

Auto, 16:9, 4:3 , Panoramic, 14:9 Zoom,

Cinema, Subtitle

or Zoom.

Reset

Press or button to select Reset. Press

or OK button to reset the picture modes to

factory default settings.

Store

Press or button to select Store. Press

or OK button to store the settings. “Stored”

will be displayed on the screen.

Sound Menu

SOUND

Volume

Equali zer

Balanc e

Headph one

Volume

Press or button to select Volume. Press

/  button to change the level of the Volume.

Equalizer

Press or button to select Equalizer. Press

/  or OK button to enter equalizer menu.

In equalizer menu the sound mode can be

changed to Pop, Rock, Jazz, Flat, Classic or

User by pressing  /  button. Select the

desired freque ncy by

increase or decrease the frequency gain by

pressing  /  button.

or button and

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3331

Press the MENU button to return to the previous















menu.

Not e : Equa l i zer menu s e t tings c a n be

changed only when the

is in User.

Equalizer Mode

Balance

This setting is used for emphasizing left or

right speaker balance.

Press or button to select Balance. Press

/  button to change the level of the balance.

Balance level can be adjusted between

and + 32.

-32

Headphone

Press or button to select Headphone.

Press

Headphone sub-menu options are described

below:

Volume

Press or button to select Volume. Press

Pr ess

volume level. Headphone volume level can

be adjusted between 0 and 63.

Balance

Press or button to select Balance. Press

Balance level can be adjusted between -32

and +32.

Press the

menu.

button to view the headphone menu.

button to increase headphone volume level.

butt on to dec r ease he adph o ne

button to increase balance to the right. Press

butt on to decrease balance to the lef t.

MENU button to return to the previous

Sound Mode

Press or button to select Sound Mode.

Using

Stereo, Dual I or Dual II mode, only if the

selected channel supports that mode.

/  button, you can select Mono,

AVL

Automatic Volume Limiting (AVL) function adjusts

the sound to obtain fixed output level between

programmes (For instance, volume level of

advertisement s tend to be louder than

programmes).

Press

button to set the AVL as On or Off.

or button to select AVLVL. Press  /

Effect

If you are watching a mono broadcast, set

Effect on to obtain a better sound effect which

will be more stereo-like. If the current sound

system is stereo, switching this effect on will

give a more spatial effect.

Press or button to select Effect. Press

/  button to set Effect as On or Off.

Dynamic Bass

Dynamic Bass is used to increase bass effect

of the TV set.

Press or button to select Dynamic Bass.

Use

/  button set Dynamic bass to Low,

High or Off. It is not recommended to select

High while listening at high volume levels.

Subwoofer

It is possible to connect an external, active

subwoofer to the TV set to give a much deeper

bass effect.

Press

Subwoofer can be set to

Dynamic Bass is not available if

is set to On.

Set

external subwoofer to the set.

or button to select Subwoofer.

On or Off.

Subwoofer

Subwoofer to On when you connect an

3D Panorama

This feature is used to create the impression

that sound is coming from around the room

instead of from the speakers of the TV set.

Press

Use

Off.

or button to select 3D Panorama.

/  button to set 3D Panorama as On or

English - 32 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3332

Store



FEATURE



Off











Press or button to select Store.

Press

Stored” will be displayed on the screen.

“

or OK button to store the settings.

Feature Menu

PIP

PAP

Sleep Timer

Child Lock

Language

PIP

In the Feature menu, highlight PIP item by

pressing

enter

/  buttons. Press  button to

PIP submenu:

PIP

( PIP ON-OFF

PIP Picture

PIP Position

PIP Source

PIP SWAP

Sharpness, Colour, Reset and Store items in

this part are identical with

Picture menu in

the analogue TV menu System. Refer to

Picture menu explanations in the previous

parts.

PIP Position

This setting is used for moving the sub picture.

Select

PIP Position item by using  /

button. Use  /  button to adjust PIP position.

PIP Position info will be displaye d at the

bottom of the menu OSD. You can directly

chang e PI P position by pressin g  /

buttons.

Positions available are: Bottom Right, Bottom

Center, Bottom Left, Top Left, Top Center and

Top Right.

PIP Source

PIP Source setting enables you to select the

source of the sub picture.

Select PIP Source item by using

/  button to set PIP source.

Use

Note: When main picture source is TV, EXT-1, EXT-

2 or BAV, PIP window can only be set to HDMI,YPbPr or vice versa.

/  button.

PIP SWAP

Select PIP SWAP item by using  /  button.

/  button to set. This function enables

Use

to swap between the main and the PIP picture.

PAP

In the Feature menu, highlight PAP item by

pressing

enter

/  bu ttons. Press  bu tton to

PAP submenu:

PIP ON-OFF

You can activate or deactivate PIP mode by

pressing

/  button.

PIP Picture

Press  button to enter PIP Picture submenu.

Adj u s t ments o f C o ntrast , Brig h t ness,

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3333

English - 33 -

PAP

Off

PAP Picture

( PAP ON-OF F







PAP Source

PAP SWAP

PAP ON-OFF

You can activate or deactivate PAP mode by

pressing

/  button.

PAP Picture

Press  button to enter PAP Picture submenu.

Adj u s t ments o f C o ntrast , Bri g h t ness,

Sharpness, Colour, Reset and Store items in

this part are identical with

the Menu System. Refer to

Picture menu in

Picture menu

explanations in the previous parts.

PAP Source

Select PAP Source item by using  /

button. Use  /  button to set PAP source.

Note: When main picture source is TV, EXT-1, EXT-

2 or BAV, PIP window can only be set to

HDMI,YPbPr or vice versa.

PAP SWAP

Select PAP SWAP item by using  /

button. Use  /  button. This function enables

to swap between the main and the PAP picture.

Sleep Timer

Press or button to select Sleep Timer.

Use

/  button to set the Sleep Timer.

The timer can be programmed between

and 120 minutes in steps of 10 minutes.

Sleep Timer is activated, at the end of the

selected time, the TV goes automatically to

standby mode.

Off

English - 34 -

Child Lock

Press or button to select Child Lock.

Use

/  button to set the Child Lock On or

Off. When On is selected, the TV can only be

controlled by the remote control handset. In

this case the control panel buttons (except for

the

STANDBY button) will not work.

Hence, if one of those buttons is pressed,

“Child Lock On” will be displayed on the

screen when the menu screen is not visible.

Language

Press or button to select Language. Use

/  button to select the Language.

EXT-2 Out

Use this setting to define Ext-2 signal output.

Press

or button to select Ext-2 Out. Use

/  button to set Ext-2 Out to TV/DTV, EXT1,

BAV

or YPbPr Audio.

Note:

• For copying from a DVD or VCR device, you

should set desired option for

you plug your device to

EXT-2 output. If

EXT-1, you will copy

the picture that comes from the tuner.

Blue Background

If the signal is weak or absent, the TV will

automatically change to a blue screen. To

enable this, set Blue Background to On.

By pressing

Background.

Background

or but ton, sele ct Blue

Press  /  button to set Blue

as On or Off.

Menu Background

Pre s s o r b utton t o s e lect M e n u

Background.

level by pressing

You can set menu background

/  button.

Menu Timeout

To set a specific display timeout fo r menu

screens, set a value for this option.

Press or button to select Menu Timeout.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3334

Use / button to change menu timeout to



INSTALL



P04 BBC 1

P06 BBC 2

APS

Program Table

15 sec, 30 sec or 60 sec.

Teletext Language

Pr ess or but ton to sel ect Teletext

Language

. Use / button to change

Teletext Language to West, East, Turk/Gre,

Cyrillic or Arabic.

Default Zoom

While zoom mode is set as AUTO, the TV will

set the zoom mode in accordance with the

signal of the broadcast. If there is no WSS or

aspect ratio information, the TV will then use

this setting to adopt.

Press

You can set

4:3

or button to select Default Zoom.

Default Zoom to Panoramic, 16:9,

or 14:9 Zoom by pressing  /  button.

HDMI Full Mode

Press or button to select HDMI Full mode.

/  button to set the HDMI Full mode On

Use

or Off.

This feature will be visible while in HDMI

mode s in 1080i or 720 P. Feature will be

invisible while in other resolution and Pip/Pap

modes. If an overflow happens in the picture,

you can set HDMI Full mode as on to watch

more properly.

Install Menu

Program Table

Program

Band

Channel

Colour System

English - 35 -

Program Table

Select Program Table by pressing  /

button. Press “ ” to display Program Table:

P01 BBC 1 P02 C 04 P03 C 05

P05 CH 4

P07 C 04 P08 C 07 P09 C 12 P10 C 15

By moving the cursor in four directions you

can reach 20 programmes in the same page.

You can scrol l th e pa ges up or down by

pressing the navigation buttons to see all the

programmes in TV mode (except for the AV

mode s ) . B y c u r s o r a c t i o n, p rogra m m e

selection is done automatically.

Name

To change the name of a programme, select

the programme and press the

The first letter of the selected name will be

highlighted. Press or button to change

that letter and

/ button to select the other

letters. By pressing the

store the name.

Insert

Select the programme which you want to insert

by navigation buttons. Press the

bu tton . By na vig atio n butt ons move th e

sele c t e d p r o gramme to th e d e c i ded

programme space and press the GREEN

button again.

Delete

To delete a programme, press the YELLOW

button. Pressing the YELLOW button again

erases the selected programme from the

P11 S 18 P12 S 29 P13 S 31 P14 S 33 P15 S 34 P16 S 35 P17 S 36 P18 S 37 P19 S 40 P20 C 21

Name

Delete

Insert

RED button.

RED button, you can

GRE EN

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3335

pro g r amme li s t , and th e follow ing

All Prestored Programs

UKOkCancel

Auto Program

P 03 - C 04

Cancel

APS is running...

programmes shift one line up.

APS (Auto Programming System)

When you press the BLUE button for starting

automatic tuning,

Auto Programming System

menu will appear on the screen:

Country

WARNING!

will be deleted

Country

Press or button to select your country. If

you want to exit from A.P.S. function, press the

BLUE button.

When you press

OK or RED button for starting

automatic tuning, all stored programmes will

be erased and the TV will search for available

channels. During the search, the following

OSD will be displayed:

63.75 MH z

Whenever you press the BLUE button, APS

function stops and

Program Table appears

on the screen.

If you wait until the end of APS, Program Table

will be displayed with the programmes found

and located.

Program

Press or button to select Program. Use

/ button to select the program number..

You can also en ter a numb er usin g the

numeric buttons on the remote control. There

are 100 programme storage between 0 and

99.

Band

Band can be selected either C or S. Press

/ button to select Band.

Channel

Channel can be changed by / button or

numeric buttons.

Colour System

Press or button to select Colour System.

/ button to change the colour system

Use

PAL, SECAM or AUTO.

If sound system is set to I

(the UK setting),

SECAM will not be available for the colour

system settings.

Note:In AV modes, you can choose NTSC

3.58, NTSC 4.43 or PAL60 as well.

Sound System

Press or button to select Sound System.

Press

system to

/ button to change the sound

BG,DK, L or L’.

Fine Tune

Press or button to select Fine Tune. Press

/ button to adjust the tuning.

Press or button to select Search. Use

/ button to start programme searching. You

can also enter the desired frequency using the

English - 36 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3336

nu m eric but tons whi l e Sea rch it em is

INSTALL

Colour System

highlighted.

Store

Press or button to select Store. Press

or OK button to store the settings. “Program

” will be displayed on the screen.

Stored

Install Menu in AV Modes

The following screen appears in the install

menu when the TV is in AV modes. Note that

limited options will be available. Switch to TV

mode for viewing complete version of the

Install menu.

Source Menu

Press or button and select the sixth icon.

Then press

appears on the screen:

SOURCE

DTV

EXT-1

EXT-2

EXT-2 S

or OK button. Source menu

VCR

Store

Colour System

Press or button to select Colour System.

Use

/ button to change the colour system

PAL, SECAM, PAL 60, NTSC 4,43, NTSC 3,58

or AUTO.

VCR

Press or button to select VCR. Use /

button to set the VCR as On or Off.

Store Program

Press or button to select Store Program.

Press

Program Stored” will be displayed on the

“

screen.

or OK button to store the settings.

In sourc e menu, high l i g h t a sourc e by

pressing

mode by pressing

TV, DTV, EXT-1, EXT-2, EXT-2 S, BAV, HDMI

are;

or button and switch to that

button. Source options

or YPbPr.

Note: Once you have connected optional

equipme nt systems to your TV, you

should select the required input to view

pictures from that source.

English - 37 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3337

Displaying TV Information



Programme Number, Programme Name,

Sound Indicator

is displayed on t he scree n when a new

pro g ramme is ent e r ed or butto n is

pressed.

and Zoom Mode information

Mute Function

Press button to disable so und. Mute

indicator will be displayed in the upper side

of the screen.

Mute

To cancel mute, there are two alternatives; the

first one is pressing the

second one is increasing the volume level.

button and the

PIP (Picture-in-Picture) and PAP (Picture-and-Picture) Modes

Press the button to switch to PIP mode.

At PIP Mode, a small picture (PIP picture) is

displayed on the main picture. There are 1

size and 4 positions (upper left, upper right,

bottom left and bottom right) available for the

PIP window. You can use button to change

the PIP position. Aspect Ratio of the PIP

window is fixed and 4:3.

When PIP Mode is entered, the default active

window is the PIP window and the active

window is indicated by a red frame around it.

Th e ac t ive windo w can be ch anged by

pressing

belongs to active window. The place of the

status OSDs are same for both windows.

Press the

mode.

Press the button to switch to PAP mode.

At PAP Mode, two pictures with equal sizes

are displayed on the screen. Aspect Ratios of

the windows are fixed.

/  button. The status info OSD

button again to exit the PIP

When you switch to PAP Mode, main window

in PIP Mode will be displayed on the right side

of the screen. The active window can be

changed by pressing

Press the

mode.

Note: When main picture source is TV, EXT-1,

EXT-2, or BAV; PAP or PIP window can

only be set to HDMI, YPBPR or vice

versa.

button again to exit the PAP

/  button.

Picture Mode Selection

By pressin g PP button, you can change

Picture Mode settings in accordance with

your viewing requirements.

Freezing Picture

You can freeze the picture on the screen by

pressing the

Press the

again to quit freeze mode.

Note: This feature will be unavailable to be used

OK button on the remote control.

OK button to freeze picture. Press

while watching YPBPr and HDMI sources.

Zoom Modes

You can change the aspect ratio (image size)

of the TV for viewing the picture in different

zoom modes.

WIDE button to directly change the zoom

Press

mode.

Available zoom modes are listed below.

Note:

• In YPbPr and HDMI modes, while in 720p-

1080 i r esoluti o n s, onl y

available.

Auto

Whe n a WSS (Wide Screen Signalling)

signal, which shows the aspect ratio of the

picture, is included in the broadcast signal or

the signal from an external device, the TV

16: 9 m ode is

English - 38 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3338

au toma tica lly chang es the ZOOM mo de

according to the

• When the

correctly due to poor

when you want to change the

change to another

WSS signal.

AUTO mode does not function

WSS signal quality or

ZOOM mode,

ZOOM mode manually.

16:9

This uniformly stretches the left and right sides

of a normal picture (4:3 aspect ratio) to fill the

wide TV screen.

• For 16:9 aspect ratio pictures that have been

squeezed into a normal picture (4:3 aspect

ratio), use the 16:9 mode to restore the

picture to its original shape.

4:3

Use to view a normal picture (4:3 aspect ratio)

as this is its original size.

Cinema

This zooms up the wide picture (16:9 aspect

ratio) to the full screen.

Subtitle

This zooms up the wide picture (16:9 aspect

ratio) with subtitles to the full screen.

Panoramic

This stretches the left and right sides of a

normal picture (4:3 aspect ratio) to fill the

screen, without making the picture appear

unnatural.

The top and bottom of the picture are slightly

cut off.

14:9 Zoom

This zooms up the wide picture (14:9 aspect

ratio) to the upper and lower limits of the

screen.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3339

English - 39 -

Teletext

Teletext system transmits information such as

news, sports and weather on your TV. Note

that if the signal degrades, for example in poor/

adverse weather conditions, some text errors

ma y occ ur or the tel ete xt mode may be

aborted.

Teletext function buttons are listed below:

Teletext On-Off / PAT Mode

Activates teletext mode when pressed once.

Pressing this button again will split the screen

into two windows, one displaying the teletext

and the other displaying the current channel.

Pressing again will quit the teletext mode.

Index

Selects the teletext index page.

Mix

Places the teletext screen over the programme.

Expand

Press once to enlarge top half of the page,

press again to enlarge the bottom half of the

page. Press again to revert back to normal

size.

Reveal

Shows hidden information (e.g. solutions of

games).

Hold

Holds a text page when convenient. Press again to

resume.

Subcode Pages / Time

Selects subcode pages if available when the

teletext is activated. When the teletext is not

activated, displays time info if the programme

has teletext transmission.

P+ / P- and numbers (0-9)

Press to select a page.

Note: Most TV stations use code 100 for their

index pages.

Coloured Buttons

(RED/GREEN/YELLOW/BLUE)

Your TV supports both FASTEXT and TOP text

systems. When these systems are available,

the pages are divided into groups or topics.

When FASTEXT system is available, sections

in a teletext page will become colour-coded

and can be selected by pressing the coloured

butt o n s. Press a coloured button that

corresponds to your needs.

The coloured writings will appear, showing

you which coloured buttons to use when TOP

text

transmission is present. Pressing P - or

P + co m mand s wil l reque s t the ne xt or

previous page respectively.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3340

English - 40 -

Tips

Screen Care

Clean the screen with a slightly damp, soft

cloth. Do not use abrasive solvents as they

may damage the coating layer of the TV

screen.

For your safety, unplug the mains plug when

cleaning the set. When moving the TV, hold it

properly from the bottom part.

Image Persistence

Please note that ghosting may occur while

disp laying a persis tent image. LCD TVs’

image persistence may disappear after a short

time. Try turning off the TV for a while.

To avoid this, do not leave the screen in still

picture for extended periods.

No Power

If your TV system has no power, please check

the main power cable and connection to the

mains socket outlet.

Poor Picture

Have you selected the correct TV system? Is

your TV set or house aerial located too close

to a non-earthed audio equipme nt or neon

lights, etc.?

Mountains or high buildings can cause double

pictures or ghost images. Sometimes you can

improve the picture quality by changing the

direction of the aerial.

Is the picture or teletext unrecognisable?

Che c k if you h ave entered the c orrec t

frequency. Please retune the channels.

The picture quality may degrad e when two

peripherals are connect ed to the TV at the

same time. In such a case, disconnect one of

the peripherals.

No Picture

Is the aerial connected properly? Are the plugs

connected tightly to the aerial socket? Is the

aerial cable damaged? Are suitable plugs

used to connect the aerial? If you are in doubt,

consult your dealer.

No Picture means that your TV is not receiving

a transmission. Have you selected the correct

button on the remote control? Try once more.

Also make sure the correct input source has

been selected.

Sound

You can not hear any sound. Did you perhaps

interrupt the sound, pressing the

Sou n d is coming from only o ne of the

speakers. Is the balance set to one extreme?

Sound menu.

See

button?

Remote Control

Your TV no longer responds to the remote

control. Perhaps the batteries are exhausted.

If so you can still use the local buttons at the

bottom of the TV.

Input Sources

If you cannot select an input source, it is

possible that no device is connected.

Check the AV cables and connections if you

have tried to connect a device.

CI Module

If you are experiencing a problem with the CI

module, it is possible that CI module is not

properly inserted. Remove the CI card and

then reinsert.

If the problem persists, it is possible that your

CI module is not recognized. Try inserting a

different CI module.

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3341

English - 41 -

Appendix A: AV and HDMI Signal Compatibility

may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc…).

Source Available

Supported Signals

PAL 50/60

EXT-1

(SCART 1)

NTSC 60

RGB 50 RGB 60

PAL 50/60

NTSC 60

EXT-2

(SCART-2)

RGB 50

RGB 60 S-VHS 50 S-VHS 60

BAV

PAL 50/60

NTSC 60

480I 60Hz

480P 60Hz

576I 50Hz

YPbPr

576P 50Hz 720P 50Hz 720P 60Hz 1080I 50Hz 1080I 60Hz

480I 60Hz

480P 60Hz

576I 60Hz 576P 60Hz 720P 60Hz

HDMI

720P 50Hz 1080I 50Hz 1080I 50Hz

1080P 50Hz 1080P 60Hz

1080P 24 HZ

O O O O O O X X O O O O O O O O O O O O O O O O O O O O X X X

(X: Not Available, O: Available)

: In some cases a signal on the LCD TV may not be displayed properly. The problem

Note

If you do expereince such a problem please contact your dealer and also the manufacturer of the source equipment.

English - 42 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3342

Appendix B: Pin Specifications

HDMI connector pin specifications

Pin Input signal Pin Input signal

1 TMDS Data2+ 11 TMDS Clock Shield 2 TMDS Data2 Shield 12 TMDS Clock3 TMDS Data 2- 13 CEC 4 TMDS Data 1+ 14 Reserved (N.C. on device) 5 TMDS Data1 Shield 15 SCL 6 TMDS Data1- 16 SDA 7 TMDS Data0+ 17 DDC/CED Ground 8 TMDS Data0 Shield 18 +5V Power 9 TMDS Data0- 19 Hot Plug Detect

10 TMDS Clock+

SCART connector pin specifications

Pin Input signal Pi n Input signal

1 AUDIO OUT (RIGHT) 12 Not used 2 AUDIO IN (RIGHT) 13 RGB-R GND 3 AUDIO OUT (LEFT/MONO) 14 GND 4 AUDIO GND 15 RGB-R / S.V HS CHROMINANCE IN 5 RGB-B GND 16 B LANKING SIGNAL 6 A UDIO IN (LEFT/MONO) 17 COMPOSITE VIDEO GND 7 RGB-B IN 18 BLANKING SIGNAL GND 8 AUDIO / RGB SWITCH / 16:9 19 COMPOSITE VIDEO OUT

9 RGB-G GND 20 COMPOSITE VIDEO / S.VHS LUMINANCE IN 10 Not used 21 GND / SHIELD (CHASSIS) 11 RGB-G IN

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3343

English - 43 -

Appendix C: Important Instruction

For your own safety read following instruction carefully before attempting to connect this unit to

the mains supply.

MAINS (AC) OPERATION

The wires in the mains lead are coloured in accordance with the following code :

GREEN

YELLOW

(Earth)

(if there is

earth cable)

BLUE (Neutral)

IMPORTANT

As the colours of the wires in the mains lead of this appliance may not correspond

with the coloured markings identifying the terminals in your plug, proceed as follows:

The Green and Yellow coloured wire must be connected to the terminal which is

marked with the letter E, or by the earth symbol, or with Green or Green and Yellow

colors.

The Blue or Black coloured wire must be connected to the terminal which is marked

with the letter N or black colour.

The Brown or Red coloured wire must be connected to the terminal which is marked

with the letter L or Red colour.

For continued protection against risk of fire, replace only with a fuse with the same

type and rating. (ASTA approved 5A 250VAC fuse).

FUSE

BROWN (Live)

CAUTION

TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE

REMOVING COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

SAFETY PRECAUTION

THIS DEVICE MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO

NOT ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.

English - 44 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3344

Specifications

DIMENSIONS (mm)

TV BROADCASTING

PAL/SECAM B/G D/K K' I/I' L/L'

RECEIVING CHANNELS

VHF (BAND I/III)

UHF (BAND U)

HYPERBAND

CABLE TV (S1-S20/ S21-S41)

AUDIO

3D Panorama

AUDIO OUTPUT POWER (W

2 x 8 W

POWER CONSUMPTION (W)

180 W

<1 W (Standby)

) (10% THD)

RMS.

NUMBER OF PRESET CHANNELS

100

CHANNEL INDICATOR

On Screen Display

RF AERIAL INPUT

75 Ohm (unbalanced)

OPERATING VOLTAGE

220-240V AC, 50 Hz

PANEL

16:9 display, 32” Screen Size

DIMENSIONS (mm)

P L H

210 120

804 804

602 560

Poids (kg)

16,1 14,5

Avec pied

Sans pied

English - 45 -

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3345

ARGOS

Product Guarantee

This product is guaranteed against manufacturing defects for a period of

1 Year

This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of

unauthorised modifications or alterations, or has been the subject of

commercial use

In the event of a problem with the product within the guarantee period please

return it to your nearest Argos store

If the item is shown to have had an inherent defect present at the time of sale,

the store will provide you with a replacement

Your statutory rights remain unaffected

Guarantor; Home Retail Group

ENG-32761W-1055 UK-32INCH-17MB12 UK IDTV-(1 HDMI-3D PAN-WO SVHS-BASIC PIP-WO VGA)-C2-50130604.p6521.07.2008, 18:3346

489 - 499 Avebury Boulevard

Central Milton Keynes

MK9 2NW

English - 46 -

50128147

Acoustic solutions LCD32761HDF User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual