Acnodes RPW 1190 User Manual

User Manual

RPW1190: 1U 19” 1440x900 Widescreen Industrial Rackmount LCD Monitor

RPW1190

19” 1440x900 Widescreen LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All righ ts reserved. Product descripti on and product speci ficat ions are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

RPW1190

Legal Information

First English printing, October 2002 Information in this document has been carefully checked for accuracy; howeve r, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.

¦ Unplug equipment before cleaning. Don’t use liquid or spray de tergent; use a moist cloth. ¦ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

¦ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

¦ When the equipment is in an open position, do not cove r, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating. ¦ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it. ¦ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label. ¦ Observe all precautions and wa rnings attached to the equipment. ¦ If you don’t intend on using the equ ipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage. ¦ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the powe r

supply or on other hardware may cause damage, fire or electrical shock. ¦ Only qualified service personnel should open the chassi s. Opening it yourself could damage the equipment and

invalidate its warranty. ¦ If any part of the equipment becomes damaged or stops functi oning, have it checked by qualified service personnel.

What the warranty does not cover

¦ Any product, on which the serial number has been defaced, modified or removed. ¦ Damage, deterioration or malfunction resulting from:

? Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or

failure to foll ow instructions supplied with the product. ? Repair or attempted repair by anyone not authorized by us. ? Any damage of th e product due to shipment. ? Removal or installation of the product. ? Causes external to the product, such as electric power fluctuation or failure. ? Use of supplies or parts not meeting our specifications. ? Normal wear and tear. ? Any other caus es which does not relate to a product defect .

¦ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are design ed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This e quipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions , m ay cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause h armful interference to radio or television reception, which can be determined by turning the equ ipment off and on, the user is encou raged to try to correct the interference by one or more of the foll owing measures: ¦ Re-position or relocate the receiving antenna. ¦ Increase the separation between the equipment and receiver. ¦ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

19” 1440x900 Widescreen LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Contents

< Part. 1 > RPW1190

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Installation

P.1 P.1 - 2 P.3

< Part. 2 > Specifications / OSD

2.1 Product Specifications

2.2 On-screen Display Operation ( OSD )

P.4 - 5 P.6 - 7

< Part. 3 > Options

3.1 3G / HD / SD-SDI Broadcast-grade input

3.2 HDMI, S-Video + BNC & Audio

3.3 48V, 24V or 12VDC power

P.8 P.9 P.10

RPW1190

19” 1440x900 Widescreen LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

RPW1190

Before Installation

¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediatel y.

How To Clean Your LCD Monitor

Caution :

¦ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

¦ When you clean your monito r, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warrant y.

¦ Use only cleansers m ade specifically for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip o ff the finish.

¦ Do not spray any kind of liquid directly onto the screen or case of your monito r. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warrant y.

¦ Do not use paper towels or abrasive pads to clean your monito r. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non -abrasive cleanser on a microfiber cloth.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfiber cloth first, not directly on the parts you are cleaning.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

19” 1440x900 Widescreen LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

< Part 1 >

< 1.1 > Package Content

RPW1190 unit X 1

- 6ft VGA cable X 1

- Power cord X 1

- M6 screw, ca ge nut & cup washer X 8

The above package content is only for the pure model ( VGA and DVI-D only ). It varies with options such as SDI, HDMI , AV, audio & DC power.

< 1.2 > Structure Diagram

1 LCD panel

Installation Slide

LCD OSD membrane

Audio speaker

Carry handle to release the 2-pt lock

2-point lock

RPW1190

19” 1440x900 Widescreen LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

+ 9 hidden pages