Acnodes RPS 1200 User Manual

Download

Page 1

User Manual

RPS1200: 1U 20” 1152x900 SUN Native Resolution Industrial Rackmount LCD Monitor

RPS1200

20” 1152 x 900 SUN LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All righ ts reserved. Product descripti on and product speci ficat ions are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 2

RPS1200

Legal Information

First English printing, October 2002 Information in this document has been carefully checked for accuracy; howeve r, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.

¦ Unplug equipment before cleaning. Don’t use liquid or spray de tergent; use a moist cloth. ¦ Keep equipment away from excessive humidity a nd heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

¦ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

¦ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating. ¦ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it. ¦ If you are using a power cord that didn’t ship with the e quipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label. ¦ Observe all precautions and warnings attach ed to the equipment. ¦ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage. ¦ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, fire or electrical shock. ¦ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty. ¦ If any part of the equipment becomes damaged or stops functioning, have it checked by qu alified service personnel.

What the warranty does not cover

¦ Any product, on which the serial number has been defaced, modified or removed. ¦ Damage, deterioration or malfunction resulting from:

? Accident, misuse , neglect, fire, water, li ghtning, or other acts of nature, unauthorized product modification, or

failure to follow instructions supplied with the product. ? Repair or attempted repair by anyone not authorized by us. ? Any damage of the product due to shipment. ? Removal or installation of the product. ? Causes external to the product, such as electric power fluctuation or failure. ? Use of supplies or parts not meeting our specifications. ? Normal wear and tear. ? Any other ca uses which does not relate to a product defect.

¦ Removal, installation, and set-up servi ce charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been te sted and found to comply with the limits for a Class B digital de vice, pursuant to Part 15 of the FCC rules. These limits are design ed to provide reasonable protection a gainst harmful interference in a residential installation. Any changes or modifica tions made to this equipme nt may void the user’s authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions , m ay cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause h armful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encou raged to try to correct the interference by one or more of the following measures: ¦ Re-position or relocate the receiving antenna. ¦ Increase the separation between the equipment a nd receiver. ¦ Connect the equipment into an outlet on a circuit different from that to whic h the receiver is connected.

20” 1152 x 900 SUN LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 3

RPS1200

Contents

< Part. 1 > RPS1200

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Installation

P.1 P.1 - 2 P.3

< Part. 2 > Specifications / OSD

2.1 Product Specifications

2.2 On-screen Display Operation ( OSD )

P.4 - 5 P.6 - 7

< Part. 3 > Options

3.1 48V, 24V or 12VDC power P.8

20” 1152 x 900 SUN LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

Page 4

RPS1200

Before Installation

¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anyt hing is missing, or damaged, contact the supplier immediatel y.

How To Clean Your LCD Monitor

Caution :

¦ To avoid the r isk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

¦ When you clean your monito r, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warrant y.

¦ Use only cleansers m ade specifically for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip o ff the finish.

¦ Do not spray any kind of liquid directly onto the screen or case of your monito r. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warrant y.

¦ Do not use paper towels or abrasive pads to clean your monito r. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To rem ove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non -abrasive cleanser on a microfiber cloth.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfiber cloth first, not directly on the parts you are cleaning.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

20” 1152 x 900 SUN LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 5

< Part 1 >

< 1.1 > Package Content

RPS1200 unit X 1

- 6ft VGA cable X 1

- Power cord X 1

- M6 screw, cage nut & cup washer X 8

The above package content is only for the pure model ( VGAand DVI-D only ). It varies with options such as DC power.

< 1.2 > Structure Diagram

1 LCD panel

Installation Slide

LCD OSD membrane

Audio speaker

Carry handle torelease the 2-pt lock

2-point lock

RPS1200

20” 1152 x 900 SUN LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

Page 6

< 1.2 > Dimension

Front View

Side View

UNIT : mm

1mm = 0.03937 inch

Top View

Model

Product Dimension

(W x D x H)

Packing Dimension

(W x D x H)

Net

Weight

Gross

Weight

RPS1200

439.6 x 650 x 44 mm

17.3 x 25.6 x 1.73"

595 x 860 x 140 mm

23.4 x 33.9 x 5.5”

13.5 kg 30 lb

17.5 kg 39 lb

The weight is only for the pure models. It varies with accessories & options such as DC power.

RPS1200

20” 1152 x 900 SUN LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 7

< 1.3 > Installation - How to install 1U 20" LCD Tray

Rear side

Lef t bracket

Right bracket

Front side

Step

¦ Attach the left and right mounting bracket to

rack 19" mounting rails.

¦ Adjust the mounting bracket to fit your rack. ¦ M6 screw x 8 pcs included.

Leave all M6 screws slightly loose, until you complete the installation in step 3

Mounting bracket

Step

¦ Pick up the LCD tray. ¦ Insert the LCD tray into the mounting bracket. ¦ Pull and hold the left & right black arrow buttons

on the rails.

¦ Return the LCD tray to park position.

Black arro w butt on

Front side

M3 .2 sc rew

Step

¦ Fix the rear kit to the mounting bracket with M3.2

screw x 4 pcs included.

This step is necessary. Failure to complete this will cause damage.

Rear kit

M6 sc rew

Step

Complete the installation

¦ Tighten all 8 pcs of M6 s crew to complete the

installation.

Page 8

< Part 2 >

< 2.1 > Product Specifications

LCD Panel

Manufacturer

Panel Size ( diagonal )

20-inch TFT color LCD

Display pixel ( dots x lines )

1152 x 900 ( Direct )

1600 x 1200 ( Native )

Brightness ( typ. )

300

Contrast Ratio ( typ. )

800:1

Color

16.7 M

Viewing Angle ( L/R/U/D )

89/89/89/89

Response Time ( ms )

Dot pitch ( mm )

0.255

Display Ar ea ( mm )

408.00H x 306.00V

Surface treatment

Anti-glare, Hard-coating

Surface hardness

Backlight Type

CCFL

MTBF ( hrs )

45,000

Video Connectivity

Digital

DVI

DVI-D, TMDS single link

Analog

VGA

Analog 0.7Vp-p

Plug & Play

DVI / VGA

VESA EDID structure 1.3

Synchronization

VGA

Separate, Composite & SOG

Audio Connectivity

Audio Input

Connector

3.5mm stereo jack

Impedance / Power level

30kΩ / 750mV

Audio Output

Connector

3.5mm stereo jack

Resistance / Power level

30kΩ / 2.8V

Speaker Output

Power

2 x 2W

*When the audio output is conn ecte d, speaker output is OFF

Power

Power Supply

Range

Auto-sensing 100 to 240VAC, 50 / 60Hz

Power Consumption

Screen display ON

48W or less

Power saving mode

4W or less

Power button OFF

1W or less

RPS1200

20” 1152 x 900 SUN LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 9

Regulatory Safety Approval FCC & CE

Environmental Conditions

Operating

Temperature

0 t o 50°C degree

Humidity

20~90%, non-condensing

Storage

Temperature

-5 to 60°C degree

Humidity

5~90%, non-condensing

Shock

10G acceleration (11ms duration)

Vibration

5~500Hz 1G RMS random

Physical Specification

Product ( W x D x H )

439.6 x 650 x 44 mm

17.3 x 25.6 x 1.73 inch

Packing ( W x D x H )

595 x 860 x 140 mm

23.4 x 33.9 x 5.5 inch

Net Weight

13.5 kgs / 30 lbs

Gross Weight

17.5 kgs / 39 lbs

Applicable Format

DVI-D / VG A Input

PC Signal

1152 x 900 x 66Hz

1600 x 1200 x 60Hz

1400 x 1050 x 60Hz

1440 x 900 x 60Hz

1360 x 768 x 60Hz

1280 x 1024 x 60 / 75Hz

1280 x 960 x 60Hz

1280 x 760 x 60 / 75Hz

1152 x 864 x 75Hz

1024 x 768 x 60 / 70 / 75Hz

848 x 480 x 60Hz

800 x 600 x 60 / 72 / 75Hz

720 x 400 x 70Hz

640 x 480 x 60 / 72 / 75Hz

640 x 400 x 70Hz

640 x 350 x 70Hz

RPS1200

20” 1152 x 900 SUN LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

Page 10

< 2.2 > On-screen Display Operation ( OSD )

Membrane Switch Function

Turn the monitor on or off

Display the OSD menu

Act as an Enter key to select screen setting options

Scroll through menu options and adjust

the displayed control

Exit the OSD screen Go back to the previous on-screen sub-menu or main menu

Remark : All LED to uch buttons in WHITE light.

The LED of Power touch button will flash continuously when there is no signal input.

1 All th e LED touch buttons will automaticall y turn off after 10 minutes of idle status ( except the Power ).

2 Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power ).

RPS1200

20” 1152 x 900 SUN LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 11

< 2.2 > On-screen Display Operation ( OSD )

OSD Configuration Page

Image:

for the brightness, contrast, color temp, red, green, and blue

Geometry:

for the auto adjust, H posi tion, V position, phase and clock

Video:

for the colour, tint, sharpness, noise reduction, DCDi and TV Setup

Audio:

for volume, bass, treble, balance, AVL and mute

Misc:

for the language, OSD position, graphic mode, ratio, reset and timer

RPS1200

20” 1152 x 900 SUN LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

Page 12

<Part 3> < 3.1 > Options : DC Power

Model

12V

24V

48V

Input rating

Input voltage:

12-Vol t

24-Volt

48-Volt

Input range:

9 ~ 18V

18 ~ 36V

36 ~ 75V

Input current

- No load

50 mA

- Full load

4950 mA

2450 mA

1220 mA

Output rating

Output voltage:

12-Vol t

12-Volt

Output current:

4.16A

Efficiency

84%

85%

DC power

DVI-D

VGA

***

Option excludes 1 x power cord and 1 x AC po wer adapter

RPS1200

20” 1152 x 900 SUN LCD Monitor 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.