Acnodes RP 2117 User Manual

Download

Page 1

User Manual

RP2117: 1U 17” WUXGA 1920x1200 Full HD Widescreen Industrial Rackmount LCD Monitor

RP2117

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All righ ts reserved. Product descripti on and product speci ficat ions are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 2

RP2117

Legal Information

First English printing, October 2002 Information in this document has been carefully checked for accuracy; howeve r, no guarantee is given to the correctness of the contents. The information in this docum ent is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.

Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.

¦ Unplug equipment before cleaning. Don’t use liquid or spray de tergent; use a moist cloth. ¦ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

¦ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

¦ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating. ¦ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it. ¦ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label. ¦ Observe all precautions and wa rnings attached to the equipment. ¦ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage. ¦ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the powe r

supply or on other hardware may cause damage, fire or electrical shock. ¦ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and

invalidate its warranty. ¦ If any part of the equipment becomes damaged or stops functi oning, have it checked by qualified service personnel.

What the warranty does not cover

¦ Any product, on which the serial number has been defaced, modified or removed. ¦ Damage, deterioration or malfunction resulting from:

? Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or

failure to foll ow instructions supplied with the product. ? Repair or attempted repair by anyone not authorized by us. ? Any damage of the product due to shipment. ? Removal or installation of the product. ? Causes external to the product, such as electric power fluctuation or failure. ? Use of supplies or parts not meeting our specifications. ? Normal wear and tear. ? Any other causes which does not relate to a product defect.

¦ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are design ed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This e quipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, m ay cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encou raged to try to correct the interference by one or more of the foll owing measures: ¦ Re-position or relocate the receiving antenna. ¦ Increase the separation between the equipment and receiver. ¦ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 3

Contents

< Part. 1 > RP2117

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Installation

P.1 P.1 - 2 P.3

< Part. 2 > Specifications / OSD

2.1 Product Specifications

2.2 On-screen Display Operation ( OSD )

2.3 Picture In Picture ( PIP ) / Picture By Picture ( PBP )

P.4 - 5 P.6 - 7 P.8 - 9

< Part. 3 > Options

3.1 3G / HD / SD-SDI Broadcast-grade input

3.2 HDMI & Audio

3.3 X17” Touchscreen : Resistive, Capacitive

3.4 48V, 24V or 12VDC power

P.10 P.11 P.12 P.13

RP2117

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

Page 4

RP2117

Before Installation

¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediatel y.

How To Clean Your LCD Monitor

Caution :

¦ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

¦ When you clean your monito r, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warrant y.

¦ Use only cleansers m ade specifically for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip o ff the finish.

¦ Do not spray any kind of liquid directly onto the screen or case of your monito r. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warrant y.

¦ Do not use paper towels or abrasive pads to clean your monito r. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non-abrasive cleanser on a microfi ber cloth.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfiber cloth first, not directly on the parts you are cleaning.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 5

< Part 1 >

< 1.1 > Package Content

RP 2117 unit X 1

- 6ft VGA cable X 1

- P ower cord X 1

- M6 scre w, cage nut & cup washer X 8

The above package conte nt is only for the pure model ( VGA and DVI-D on ly ). It v aries with options such as SDI, HDMI, audio, touchscreen & DC powe r.

< 1.2 > Structure Diagram

1 LCD panel

Installatio n Slide

3 Audio speaker ( for HDMI or Audio option )

LCD OSD membrane

Carry handle to release the 2-pt lock

6 2-point lock

RP2117

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

Page 6

< 1.2 > Dimension

Front View

Side View

UNIT : mm

1mm = 0.03937 inch

Top View

Model

Product Dimension

(W x D x H)

Packing Dimension

(W x D x H)

Net

Weight

Gross

Weight

RP2117

441.6 x 480 x 44 mm

17.4 x 18.9 x 1.73"

590 x 687 x 120 mm

23.2 x 27 x 4.7”

11 kg

24 lb

15 kg

33 lb

The weight is only for the pure models. It varies with accessories & options such as SDI, HDMI, audio, touchscreen & DC powe r.

RP2117

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 7

< 1.3 > Installation - How to install Installation Slides

Step

¦ Insert the left and right rear mounting brackets into

the display drawer.

Step

¦ Measure the depth of the front and rear mounting rails. ¦ Align each rear mounting bracket to a suitable length.

Step

Complete the installation

¦ Fix the display drawer into the rack.

M6 screw, cage nut & cup washer x 8 are provided.

Page 8

< Part 2 >

< 2.1 > Product Specifications

LCD Panel

Panel Size ( diagonal )

17.1-inch Widescreen TFT color LCD

Display pixel ( dots x lines )

1920 x 1200

Brightness ( typ. )

210

Contrast Ratio ( typ. )

600:1

Color

16.7 M, 8-bit

Viewing Angle ( L/R/U/D )

65/65/55/55

Response Time ( ms )

Dot pitch ( mm )

0.191

Display Area ( mm )

367.20H x 229.50V

Surface treatment

Anti-glare, Hard-coating

Surface hardness

Backlight Type

LED

MTBF ( hrs )

20,000

Video Connectivity

Digital

HDMI

HDMI 1.1, CEA-861-D

DVI

DVI-D, TMDS single link

Analog

VGA

Analog 0.7Vp-p

Plug & Play

DVI / VGA

VESA EDID structure 1.3

Synchronization

VGA

Separate, Composite & SOG

Audio Connectivity

Audio Input

Connector

3.5mm stereo jack

Impedance / Power level

30kΩ / 750mV

Audio Output

Connector

3.5mm stereo jack

Resistance / Power level

30kΩ / 2.8V

Speaker Output

Power

2 x 2W

*When the audio output is conn ected, speaker o utput is OFF

Regulatory Safety Approval FCC & CE

RP2117

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 9

RP2117

Power

Power Supply

Range

Auto-sensing 100 to 240VAC, 50 / 60Hz

Power Consumption

Screen display ON

34W or less

Power saving mode

4W or less

Power button OFF

1W or less

Environmental Conditions

Operating

Temperature

0 to 50°C degree

Humidity

20~90%, non-condensing

Storage

Temperature

-5 to 60°C degree

Humidity

5~90%, non-condensing

Shock

10G acceleration (11ms duration)

Vibration

5~500Hz 1G RMS random

Physical Specification

Product ( W x D x H )

441.6 x 480 x 44 mm

17.4 x 18.9 x 1.73 inch

Packing ( W x D x H )

590 x 687 x 120 mm

23.2 x 27 x 4.7 inch

Net Weight

11 kgs / 24 lbs

Gross Weight

15 kgs / 33 lbs

Applicable Format

DVI-D / VGA Input

PC Signal

1920 x 1200 x 60Hz

1920 x 1080 x 60Hz

1280 x 1024 x 60 / 75Hz

1280 x 960 x 60Hz

1280 x 768 x 60 / 75Hz

1152 x 864 x 75Hz

1024 x 768 x 60 / 70 / 75Hz

848 x 480 x 60Hz

800 x 600 x 60 / 72 / 75Hz

720 x 400 x 70Hz

640 x 480 x 60 / 72 / 75Hz

640 x 400 x 70Hz

640 x 350 x 70Hz

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

Page 10

< 2.2 > On-screen Display Operation ( OSD )

Membrane Switch Functi on

Turn the monitor on or off

Display the OSD menu

Act as an Enter k ey to select screen setting options

Scroll through menu options and adjust

the displayed control

Exit the OSD screen Go back to the previous on-screen sub-menu or main menu

Remark : All LED touch buttons in WHITE light.

The LED of Power touch button will flash continuously when there is no signal input.

1 All th e LED touch buttons will automatically turn off after 10 minutes of idl e status ( except the Power ).

2 Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power ).

RP2117

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 11

< 2.2 > On-screen Display Operation ( OSD)

Picture

Picture mode : Standard / Vivid / Soft / User mode to choose

Brightness : Adjust background black level of the screen image

Contrast : Adjust the difference between the image background

(black level) and the foreground (white level)

Hue: Adjust the screen hue value

Saturation : Adjust the saturation of the image color

Picture size : Adjust the image size

Color temp : Standard / Cool / Warm / User to choose

Noise reduce : Reduce the noise of the image

Sharpness : Adjust the image from weak to sharp

Auto adjust : Automatically adjust sizes, centers and fine tunes the

video signal to eliminate waviness and distortion.

Clock : Adjust the clock value

Phase : Adjust the phase value

H. Position : Align the screen image left or right

V. Position : Align the screen image up or down

Audio

Audio mode : Movie / Voice / Normal / Music mode to choose

Volume : Adjust the volume of sound

Bass : Set the value of bass sound

Treble : Set the value of treble sound

Balance : Set the balance value of treble and bass sound

Analog TV audio : Set the value of analog TV audio sound

Mute : Turn off the surrounding sound

4 MISC

Language : Select the language in which the OS D menu is

displayed - English

Sleep timer : Set the off time

PIP mode : Adjust picture in picture setting

PIP position : Enter into PIP position

PIP source : Enter into the Sub source and sound source

System reset : Return the adjustment back to factory setting

Information : Select for Help

Page 12

< 2.3 > How to Use Picture In Picture ( PIP ) / Picture By Picture ( PBP )

< 2.3.1 > Picture in Picture ( PIP )

Mode

Display the Sub screen in the Main screen.

OSD Menu ? MISC ? PIP Mode ? Large / Small / OFF

Main screen

Sub screen

Position

Adjust the position of the Sub screen ( top left, bottom left, top right, bottom right )

OSD Menu ? MISC ? PIP Position ? top left / top right / bottom left / bottom right

top left top right

bottom left bottom right

Size

Adjust the size of the Sub screen ( Large / Small )

OSD Menu ? MISC ? PIP Mode ? Large / Small

Size of Sub screen

LCD Monitor

Large Sub screen

Small Sub screen

1920 x 1200

552 x 414

480 x 360

1920 x 1080

552 x 414

480 x 360

1440 x 900

414 x 310

360 x 270

1366 x 768

392 x 294

340 x 254

1280 x 1024

368 x 276

320 x 240

Page 13

< 2.3.2 > Picture By Picture ( PBP )

Mode

Display the Sub screen next to the Main screen.

OSD Menu ? MISC ? PIP Mode ? PBP

Main screen Sub screen

Size

LCD Monitor

Main / Sub screen

1920 x 1200

955 x 716

1920 x 1080

955 x 716

1440 x 900

715 x 536

1366 x 768

678 x 508

1280 x 1024

635 x 476

< 2.3.3 > PIP / PBP Source

To select an input signal for PIP / PBP Sub screen.

OSD Menu ? MISC ? PIP Source ? VGA / S-Video / Composite / DVI / HDMI / SDI / YPbPr / TV

The PIP / PBP is operable in the following table :

Sub

Main

VGA

S-Video

Composite

DVI-D

HDMI

SDI

YPbPr

VGA

xoooooo

S-Video

oxxoooo

Composite

oxxoooo

DVI

oooxxoo

HDMI

oooxxoo

SDI

oooooxx

YPbPr

oooooxx

oxxoooo

Page 14

< P art 3 >

< 3 .1 > O ptio ns : 3G / H D / SD -S DI input

Acnod es ’ S D I in pu t is an i d ea l s o luti o n for th e bro ad cast grad e v id e o an d h i g h re solutio n CC T V m a rke t.

D es i g ne d fo r u s e wit h F ul l H D 1080 p a n d ultr a h ig h res o luti o n 192 0 x 120 0 L C D d is pl ay s , Acn od es pro v ide s a S D I i np u t m o d ul e witho u t us in g ad dition a l s p ac e or p o we r an d it c om e s stan dar d wit h a 2- ye a r wa rrant y.

Po w e r

A u dio

S DI

in - out

HD M I

VG A

DVI - D

***

P C in ou t

Fo r S D I o ptio n, cas in g depth w ill b e e xte nd ed fro m 480mm ( 18 .9 " ) to 530 m m ( 2 0.9" )

IN P UT

3G -S D I I N

BN C x 1 / 0.8 V p -p ( 75 o h m )

3G -S D I O UT

BN C x 1 / A c t ive t hro ugh , equ al ized & r el oc ked

Sta nda r d C om plian c e

V id e o

SM P T E 4 25M / 2 74 M / 2 96 M / 1 25 M ITU -R B T.656

Au di o

SM P T E 2 99M / 2 72 M -C

C om pa tibl e Vi d e o F orma t

3G -S D I

10 80p @ 6 0 / 50 Hz, 4: 2 :2 10 80p @ 3 0 / 25 / 24 H z, 4 :4 :4 10 80i @ 6 0 / 5 0 Hz, 4: 4:4 72 0p @ 60 / 5 0Hz , 4:4 :4

H D -SD I

10 80p @ 3 0 / 25 / 24 H z, 4 :2 :2 10 80i @ 6 0 / 5 0 Hz, 4: 2:2 72 0p @ 60 / 5 0Hz , 4:2 :2

SD -SD I

48 0i @ 6 0H z , 4:2 :2

IT U - R B T.6 56

57 6i @ 5 0H z , 4:2 :2

C om pa tibl e A udio F o r m a t

3G -S D I

48 k Hz, 1 6 / 2 0 / 24 b it, 2 CH , Synch ro ni zed Video

H D -SD I

48 k Hz, 1 6 / 2 0 / 24 b it, 2 CH , Synch ro ni zed Video

SD -SD I

48 k Hz, 1 6 / 2 0 / 24 b it, 2 CH , Synch ro ni zed / As ynchron ized V ide o

M a x . T ransm issi o n Distance 75 o hm coax ia l c ab le

3G -S D I

15 0m at 2.9 7G b/s

H D -SD I

25 0m at 1.4 85Gb /s

SD -SD I

48 0m at 270 M b /s

RP2117

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 15

RP2117

< 3.2 > Options :

- HDMI ( HDMI 1.1, CEA-861-D )

- Audio

( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )

For the above options, casing depth will be extended from 480mm ( 18.9" ) to 530mm ( 20.9" )

Power

Audio

PC in out

HDMI

VGA

DVI-D

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

All righ ts reserved. Product descripti on and product speci ficat ions

are subj ect to change w ith out n oti ce. F or lates t product inform ati on,

ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 16

< 3.3 > Options : Touchscreen & driver

17" USB Touchscreen Specification

Mod el

Technology

Touch Point

Method

Activation Force

Durability

Response Time

Optical Transmittance

Surface Hardness

Haze

Glass

Connector

Compatibility

TRB e-Resistive

TCB e-Capacitive

5-W ire Resistive

Capacitive

Single

Stylus or Finger

Finger

= 50g / Stylus=R0.8

= 50g

10 million touches

300 million touches

15 ms

20 ms

80% ± 3%

92% ±2%

8% ± 3%

2.2 ±0.2 mm

2.8 mm ±10%

USB Type A

Windows 7 / XP / Vista, Linux

¦ USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc ¦ For detailed information, please refer to the attached CD disc ¦ As the touchscreen unit is not made of toughened glass, please handle it carefully

USB Touchscreen

Power

VGA

DVI-D

***

For touchscreen option, casing depth will be extended from 480mm ( 18.9" ) to 530mm ( 20.9" )

RP2117

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 17

RP2117

Please follow the below steps to setup the touch screen: -

Step 1. Run the bundled CD disc

Step 2. Double click the Setup.exe

Step 3. Follow the installation instruction to finish the setup

Step 4. After installation, run the TouchKit program & the “4 point calibration”

Please do the initial calibration after the first setup

17” 1920x1200 Full HD Widescreen LCD

1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

All righ ts reserved. Product descripti on and product speci ficat ions

are subj ect to change w ith out n oti ce. F or lates t product inform ati on,

ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 18

RP2117

< 3.4 > Options : DC Power

Model

12V

24V

48V

Input rating

Input voltage:

12-Volt

24-Volt

48-Volt

Input range:

9 ~ 18V

18 ~ 36V

36 ~ 75V

Input current

- No load

50 mA

- Full load

4950 mA

2450 mA

1220 mA

Output rating

Output voltage:

12-Volt

Output current:

4.16A

Efficiency

84%

85%

DC power

DVI-D

VGA

***

For DC power option :

( 1 ) Option excludes 1 x power cord and 1 x AC power adapte r.

( 2 ) Casing depth will be extended from 480mm ( 18.9" ) to 530mm ( 20.9" )

17” 1920x1200 Full HD Widescreen LCD 1U Rackmount Display Panel

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.