Acnodes RP 1195 User Manual

User Manual
RP1170/1195: 1U 17/19” Industrial Rackmount LCD Monitor
RP1170/1195
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All righ ts reserved. Product descripti on and product speci ficat ions are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
RP1170/1195
Legal Information
First English printing, October 2002 Information in this document has been carefully checked for accuracy; howeve r, no guarantee is given to the correctness of the contents. The information in this document is subject to change wi thout notice. We are not liable for any i njury or loss that results from the use of this equipment.
Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
¦ Unplug equipment before cleaning. Don’t use liquid or spray de tergent; use a moist cloth. ¦ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
¦ When installi ng, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
¦ When the equipment is in an open position, do not cove r, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating. ¦ Arrange the equipment’s power cord in suc h a way that others won’t trip or fall over it. ¦ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rati ng on the cord should be higher than the o ne listed
on the equipment’s ratings label. ¦ Observe all precautions and wa rnings attached to the equipment. ¦ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage. ¦ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock. ¦ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty. ¦ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
¦ Any product, on which the serial number has been defaced, modified or removed. ¦ Damage, deterioration or malfunction resulting from:
? Accident, misuse , neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplie d with the product. ? Repair or attempted repair by anyone not authorized by us. ? Any damage of the product due to shipment. ? Removal or installation of the product. ? Causes external to the product, such as electric power fl uctuation or failure. ? Use of supplies or parts not meeting our specifications. ? Normal wear and tear. ? Any other ca uses which does not relate to a product defect .
¦ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are design ed to provide reasonable protection a gainst harmful interference in a residential installation. Any changes or modifica tions made to this equipme nt may void the user’s authority to operate this equipme nt. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, m ay cause harmful interference to radio communications. However, there i s no guarantee that interference will not occur in a particular installation. If thi s equipment does cause h armful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encou raged to try to correct the interference by one or more of the foll owing measures: ¦ Re-position or relocate the receiving antenna. ¦ Increase the separation between the equipment and receiver. ¦ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
Contents
< Part. 1 > RP1170 / RP1195
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Installation
P.1 P.1 - 2 P.3
< Part. 2 > Specifications / OSD
2.1 Product Specifications
2.2 On-screen Display Operation ( OSD )
P.4 - 5 P.6 - 7
< Part. 3 > Options
3.1 HDMI, S-Video + BNC & Audio
3.2 17” / 19” Touchscreen : Resistive, Capacitive
3.3 48V, 24V or 12VDC power
P.8 P.9 P.10
RP1170/1195
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All righ ts reserved. Product descripti on and product speci ficat ions are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
RP1170/1195
Before Installation
¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediatel y.
How To Clean Your LCD Monitor
Caution :
¦ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
¦ When you clean your monito r, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warrant y.
¦ Use only cleansers m ade specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip o ff the finish.
¦ Do not spray any kind of liquid directly onto the screen or case of your monito r. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warrant y.
¦ Do not use paper towels or abrasive pads to clean your monito r. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1
Disconnect the power cord.
2
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please f ollow these steps :
1
Disconnect the power cor d.
2
Spray a small amount of non -abrasive cleanser on a microfiber cloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your microfiber cloth first, not directly on the parts you are cleaning.
3
Gently wipe the surface. Use as little pressure as possible.
4
Wait until your monitor is completely dry before plugging it in and powering it up.
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
< Part 1 >
< 1.1 > Pac kag e Content
RP 117 0 or R P 119 5 un it X 1
- 6ft VG A c ab le X 1
- Pow er c ord X 1
- M6 scre w, c age nut & cup washer X 8
Th e ab ove packag e co ntent is onl y for the pu re m o del ( VG A and D V I -D on ly ).
It varies w ith op tion s suc h as H D M I, AV, au dio , to uchs creen & D C p ow e r.
< 1.2 > Stru cture Diag ram
1
4
2
5
3
6
1 LCD panel
2
Insta llatio n Sl ide
3
Audio sp eaker ( for HDMI or Audi o optio n )
4
LCD O SD m em brane
5
Carry handl e to releas e the 2 - pt lock
6
2-poin t lock
RP1170/1195
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All righ ts reserved. Product descripti on and product speci ficat ions are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
< 1.2 > Dimension
Front V i ew
Side View
UNIT : mm
1mm = 0.03937 i nch
Top Vi ew
Mod el
Pro duct Dim e ns ion
(W x D x H)
Pa c king D im ension
(W x D x H)
Net
Weight
Gross
Weight
RP117 0 series
441.6 x 50 0 x 44 mm
17.4 x 18. 1 x 1.7 3"
590 x 687 x 12 0 mm
23.2 x 27 x 4.7”
10.5 k g 23 lb
16.5 k g 36 lb
RP119 5 series
441.6 x 50 0 x 44 mm
17.4 x 19. 7 x 1.7 3"
590 x 687 x 120 mm
23.2 x 27 x 4.7”
12.5 k g 28 lb
18.5 k g 41 lb
The w ei ght is onl y for the pure mo dels . It v aries with a ccessories & op tion s such as HDMI, AV, audio , to uchscre en & DC p ow e r.
RP1170/1195
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
< 1.3 > Installation - How to install Installation Slides
Step
1
¦ Insert the left and right rear mounting brackets into
the display drawer.
Step
2
¦ Measure the depth of the front and rear mounting rails. ¦ Align each rear mounting bracket to a suitable length.
Step
3
Complete the installation
¦ Fix the display drawer into t he rack.
M6 screw, cage nut & cup washer x 8 are provided.
< Part 2 >
< 2.1 > Product Specifications
LCD Panel
RP1170
RP1195
Manufacturer
Panel Size ( diagonal )
17-inch TFT color LCD
19-inch TFT color LCD
Display pixel ( dots x lines )
1280 x 1024
1280 x 1024
Brightness ( typ. )
250
250
Contrast Ratio ( typ. )
1000:1
1000:1
Color
16.7 M
16.7 M
Viewing Angle ( L/R/U/D )
80/80/80/80
80/80/80/80
Response Time ( ms )
5
5
Dot pitch ( mm )
0.264
0.294
Display Area ( mm )
337.92H x 270.33V
376.32H x 301.05V
Surface treatment
Haze 25%, Hard-coating
Surface hardness
3H
3H
Backlight Type
CCFL
CCFL
MTBF ( hrs )
50,000
50,000
Video Connectivity
Digital
HDMI
HDMI 1.1, CEA-861-D
DVI
DVI-D, TMDS single link
Analog
VGA
Analog 0.7Vp-p
Composite ( BNC )
NTSC & PAL
S-Video ( 4-pin )
NTSC & PAL
Plug & Play
DVI / VGA
VESA EDID structure 1.3
Synchronization
VGA
Separate, Composite & SOG
Audio Connectivity
Audio Input
Connector
3.5mm stereo jack
Impedance / Power level
30kΩ / 750mV
Audio Output
Connector
3.5mm stereo jack
Resistance / Power level
30kΩ / 2.8V
Speaker Output
Power
2 x 2W
*When the audio out put is co nnected, speaker output is OFF
Regulatory Safety Approval FCC & CE
RP1170/1195
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
RP1170/1195
Power
Power Supply
Range
Auto-sensing 100 to 240VAC, 50 / 60Hz
Power Consumption
Screen display ON
25W or less
Power saving mode
4W or less
Power button OFF
1W or less
Environmental Conditions
Operating
Temperature
0 to 50°C degree
Humidity
20~90%, non-condensing
Storage
Temperature
-5 to 60°C degree
Humidity
5~90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random
Physical Specification
RP1170
RP1195
Product ( W x D x H )
441.6 x 500 x 44 mm
17.4 x 19.7 x 1.73 inch
441.6 x 500 x 44 m m
17.4 x 19.7 x 1.73 inch
Packing ( W x D x H )
590 x 687 x 120 mm
23.2 x 27 x 4.7 inch
590 x 687 x 120 mm
23.2 x 27 x 4.7 inch
Net Weight
10.5 kgs / 23 lbs
12.5 kgs / 28 lbs
Gross Weight
16.5 kgs / 36 lbs
18.5 kgs / 41 lbs
Applicable Format
DVI-D / VGA Input
PC Signal
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 760 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All righ ts reserved. Product descripti on and product speci ficat ions are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
< 2.3 > On-screen Display Operation ( OSD )
Membrane Switch Function
Turn the monitor on or off
Display the OSD menu
Act as an Enter key to select screen setting options
Scroll through menu options and adjust
the displayed control
Exit the OSD screen Go back to the previous on-screen sub-menu or main menu
Remark : All LED to uch buttons in WHITE light.
The LED of Power touch button will flash continuously when there is no signal input.
1 All the LED touch buttons will automatically turn o ff after 10 minutes of idle status ( except the Power ).
2 Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power ).
RP1170/1195
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
< 2.3 > On-screen Display Operation ( OSD )
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green , and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
RP1170/1195
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All righ ts reserved. Product descripti on and product speci ficat ions are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
RP1170/1195
< Part 3 >
< 3.1 > Options :
- HDMI ( HDMI 1.1, CEA-861-D )
- AV
- Audio
( S-Video + Composite, BNC )
( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
( 1 ) For AV2.2 upgrade, either HDMI or DVI-D is provided.
( 2 ) For the above options, casing depth will be extended from 500mm ( 19.7" ) to 570mm ( 22.4" )
Power
Audio
in - in - out
PC Video
S-Video BNC
HDMI
VGA
DVI-D
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
< 3.2 > Options : Touchscreen & driver
17” / 19" USB Touchscreen Specification
Model
Technology
Touch Point
Method
Activation Force
Durability
Response Time
Optical Transmittance
Surface Hardness
Haze
Glass
Connector
Compatibility
17’
19”
17”
19”
TRB e-Resistive
TCB e-Capacitive
5-Wire Resistive
Capacitive
Single
Single
Stylus or Finger
Finger
= 50g / Stylus=R0.8
= 50g
35 million touches
300 million touches
15 ms
20 ms
80% ± 3%
93% ±2%
3H
9H
8% ± 3%
7%
1.4 ±0.2 mm
3.2 ±0.2 mm
2.8 mm ±10%
2.8 mm ±10%
USB Type A
USB Type A
Windows 7 / XP / Vista, Linux
Windows 7 / XP / Vista, Linux
¦ USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc ¦ For detailed information, please refer to the attached CD disc ¦ As the touchscreen unit is not made of toughened glass, please handle it carefully
USB Touchscreen
Power
VGA
DVI-D
***
For touchscreen option, casing depth will be extended from 500mm ( 19.7" ) to 570mm ( 22.4" )
RP1170/1195
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All righ ts reserved. Product descripti on and product speci ficat ions are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
RP1170/1195
Please follow the below steps to setup the touch screen:-
Step 1. Run the bundled CD disc
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to finish the setup
Step 4. After installation, run the TouchKit program & the “4 point calibration”
Please do the initial calibration after the first setup
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
RP1170/1195
< 3.3 > Options : DC Power
Model
12V
24V
48V
Input rating
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 ~ 18V
18 ~ 36V
36 ~ 75V
Input current
- No load
50 mA
50 mA
50 mA
- Full load
4950 m A
2450 mA
1220 m A
Output rating
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
DC power
DVI-D
VGA
***
For DC power option :
( 1 ) Option excludes 1 x power cord and 1 x AC power adapte r.
( 2 ) Casing depth will be extended from 500mm ( 19.7" ) to 570mm ( 22.4" )
14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939
© Copyright 2013 Acnodes, Inc. All righ ts reserved. Product descripti on and product speci ficat ions are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.
Loading...