Acnodes RMS 9200 User Manual

RMS7170/8190/9200

17/19/20” 1152x900 SUN LCD Monitor
7/8/9U Rackmount Display Panel

User Manual

RMS7170/8190/9200: 7/8/9U 17/19/20” 1152x900 SUN Native
Resolution Industrial Rackmount LCD Monitor

14628 Ce ntral Ave,
Chino , CA 91710
tel:[phone], fax:[phone]

© Copyright 2013 Acnodes, Inc.
All righ ts reserved. Product descripti on and product speci ficat ions
are subj ect to change w ith out n oti ce. F or lates t product inform ati on,
ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

RMS7170/8190/9200

Legal Information

First English printing, October 2002
Information in this document has been carefully checked for ac curacy; however, no guarantee is given to the correctnes s of the
contents. The information in this docum ent is subject to change without notice. We are not liable for any injury or loss that results from
the use of this equipment.

Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for future reference.

¦ Unplug equipment before clean ing. Don’t use liquid or spray de tergent; use a moist cloth.
¦ Keep equipment away from exc essive humidity a nd heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

¦ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing

damage to other equipment or injury to persons nearby.

¦ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.
¦ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
¦ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the o ne listed

on the equipment’s ratings label.
¦ Observe all precautions and warnings attach ed to the equipment.
¦ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.
¦ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, fire or electrical shock.
¦ Only qualified service personnel should open the chassis. Open ing it yourself could damage the equipment and

invalidate its warranty.
¦ If any part of the equipment becomes damaged or s tops functioning, have it checked by qualified service personnel.

What the warranty does not cover

¦ Any product, on which the serial number has been defaced, modified or removed.
¦ Damage, deterioration or malfunction resulting from:

? Accident, misuse, neglect, fire, water, li ghtning, or other acts of nature, unauthorized product modification, or

failure to follow instructions supplied with the product.
? Repair or attempted re pair by anyone not authorized by us.
? Any damage of the product due to shipment.
? Removal or installation of the product.
? Causes external to the product, such as electric power fluctuation or failure.
? Use of supplies or parts not meeting our specifications.
? Normal wear and tear.
? Any other ca uses which does not relate to a product defect.

¦ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been te sted and found to comply with the limits for a Class B digital de vice, pursuant to Part 15 of the F CC
rules. These limits are design ed to provide reasonable protection a gainst harmful interference in a residential installation.
Any changes or modifica tions made to this equipme nt may void the user’s authority to operate this equipme nt. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause h armful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encou raged
to try to correct the interference by one or more of the following measures:
¦ Re-position or relocate the receiving antenna.
¦ Increase the separation between the equipment a nd receiver.
¦ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

17/19/20” 1152x900 SUN LCD Monitor
7/8/9U Rackmount Display Panel

14628 Ce ntral Ave,
Chino , CA 91710
tel:[phone], fax:[phone]

© Copyright 2013 Acnodes, Inc.
All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns
are subj ect to change w ith out n oti ce. F or lates t product inform ati on,
ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

RMS7170/8190/9200

Contents

< Part. 1 > RMS 7170 / 8190 / 9200

1.1 Package Content

1.2 Structure Diagram & Dimension

1.3 Installation

P.1
P.1 - 4
P.5

< Part. 2 > Specifications / OSD / Remote Controller

2.1 Product Specifications

2.2 On-screen Display Operation ( OSD )

P.6 - 9
P.10 - 11

< Part. 3 > Options

3.1 48V, 24V or 12VDC power

P.12

17/19/20” 1152x900 SUN LCD Monitor
7/8/9U Rackmount Display Panel

14628 Ce ntral Ave,
Chino , CA 91710
tel:[phone], fax:[phone]

© Copyright 2013 Acnodes, Inc.
All righ ts reserved. Product descripti on and product speci ficat ions
are subj ect to change w ith out n oti ce. F or lates t product inform ati on,
ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

RMS7170/8190/9200

Before Installation

¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediatel y.

How To Clean Your LCD Monitor

Caution :

¦ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

¦ When you clean your monito r, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warrant y.

¦ Use only cleansers m ade specifically for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip o ff the finish.

¦ Do not spray any kind of liquid directly onto the screen or case of your monito r. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warrant y.

¦ Do not use paper towels or abrasive pads to clean your monito r. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

1

Disconnect the power cord.

2

Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To rem ove tough marks and smudges, please follow these steps :

1

Disconnect the power cord.

2

Spray a small amount of non -abrasive cleanser on a microfiber cloth.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.

3

Gently wipe the surface. Use as little pressure as possible.

4

Wait until your monitor is completely dry before plugging it in and powering it up.

17/19/20” 1152x900 SUN LCD Monitor
7/8/9U Rackmount Display Panel

14628 Ce ntral Ave,
Chino , CA 91710
tel:[phone], fax:[phone]

© Copyright 2013 Acnodes, Inc.
All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns
are subj ect to change w ith out n oti ce. F or lates t product inform ati on,
ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

< Part 1 >

< 1.1 > Package Content

< 1.2 > Structure Diagram

RMS7170 or RMS8190 or RMS9200 X 1

6ft VGA cable X 1

Powe r adapter X 1

Powe r cord X 1

Front view

RMS7170

1

RMS8190 RMS9200

2

Rea r view

Power ada pte r

1

LCD panel

3

2

LCD membrane

3 Power adapter basket

Power cord

DVI-D

Standard : VGA + DVI-D

Option : DC power

Power VGA