Acnodes MKD 6219M User Manual

MKD6219M

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc.
All rights reserved. Product description and product specifi cations
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave,
Chin o, CA 91710
tel: [phone], fax:[phone]

User Manual

MKD6219M: 1U Rackmount 19” Industrial Widescreen Monitor
Keyboard Drawer

MKD6219M

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc.
All rights rese rved. Product descri pt ion and produc t specif ication s
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave,
Chin o, CA 91710
tel: [phone], fax:[phone]

Legal Information

First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the
contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from
the use of this equipment.

Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for future reference.

■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■ When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.

■ When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.

■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.

■ Observe all precautions and warnings attached to the equipment.

■ If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being

damaged by transient over-voltage.

■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.

■ Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.

■ If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.

What the warranty does not cover

■ Any product, on which the serial number has been defaced, modified or removed.

■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or

failure to follow instructions supplied with the product.

□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fluctuation or failure.
□ Use of supplies or parts not meeting our specifications.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.

■ Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:

■ Re-position or relocate the receiving antenna.

■ Increase the separation between the equipment and receiver.

■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

MKD6219M

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc.
All rights reserved. Product description and product specifi cations
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave,
Chin o, CA 91710
tel: [phone], fax:[phone]

Matrix
DB-15 KVM

Loc al Rem ote IP

8-

port

16-port

1 1 1

MKP813

MKP1613

1 1 2

MKP824

MKP1624

1 1 0

MKS802

MKS1602

1 2 0

MKS803

MKS1603

1 3 0

MKS804

MKS1604

< Part. 1 >

1.1 Package Content

MKD6219D

Contents

P.1

1.2 Structure Diagram & Dimension

1.3 Installation

< Part. 2 > Specifications / OSD

2.1 Product Specifications

2.2 Keyboard / Mouse Specifications

2.3 On-screen Display Operation ( OSD )

< Part. 3 > Options

3.1 Audio

3.2 48V, 24V or 12VDC power

< Part. 4 >

KVM Integration

htt p:// www. acnodes.com/files/downloads/MKVM-UM.pdf

P.1 - 2
P.3 - 5

P.6 - 7
P.8
P.9 - 10

P.11
P.12

MKD6219M

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc.
All rights rese rved. Product descri pt ion and produc t specif ication s
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave,
Chin o, CA 91710
tel: [phone], fax:[phone]

Before Installation

■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

How To Clean Your LCD Monitor

Caution :

■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■ Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the finish.

■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■ Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, pleas e follow these steps :

1

Dis connect the power cord.

2

Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To rem ove tough m arks and smudges, please follow these steps :

1

Disconnect the power cord.

2

Spray a small amount of non-abrasive cleanser on a microfiber cloth.

Cauti on : Do not spra y or apply any liquids directl y onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.

3

Gently wipe the surface. Use as little pressure as possible.

4

Wait until your monitor is com pletely dry before plugging it in and powering it up.

< Part 1 >

< 1.1 > Package Content

< 1.2 > Structure Diagram

1

2

3

4

1

LCD interchangeable module kit

2

Installation S lides

3

LCD membrane

4

Membrane switch (KV M option)

5

Micro swit ch for screen auto power off

6 Audio speaker ( for HDMI or A udio option )

MK D6219M unit X 1

- 6ft VGA console cable X 1

- Power cord X 1

- M6 s crew, cage nut & cup w asher X 8

7

Keyboard interchangeable module kit

8

Mouse interchangeable module kit

9

Blue Po wer LED

10

Front USB port for device access ( USB Hub K VM only )

11

Molded front handle

5

6

7

8

9

10

11

< 1.2 > Dimension

Model

Product

Dimension

(W x D x

H)

Packing

Dimension

(W x D x

H)

Net

Weight

Gross

Weight

MKD6219M

441.6 x 580 x 44 mm

17.4 x 22.84 x 1.73"

590 x 823 x 140 mm

23.2 x 32.4 x

5.5”

11.5 kg
25

lb

16.5 kg
36

lb

Fr ont View

Side View

Top View

580

UNIT :

1mm = 0 .039 37 inch

mm

580

< 1.3 > Installation - How to install Installation Slides

Step

1

¦ Insert the left and right rear mounting brackets into

the LCD c onsole drawer.

Step

2

¦ Measure the depth of the front and rear mounting rails.
¦ Align each rear mounting bracket to a suitable length.

Step

Complete the installation

3

¦ Fix the LCD console drawer into the rack .

M6 screw, cage nut & cup washer x 8 are provided.

< 1.3 > Installation - How to install

2 post rack brackets

Rear mounting

Front mounting

1

Step

¦ Release front mounting ears before applying 2

r

ac k brackets.

post

¦ Insert rear m ounting brack ets into the LCD console

drawer.

Opt

Model :

Step

ion

MB-751-12

2

Step

Complete the installation

3

¦ Fix the LCD cons ole drawer into the 2 post r ack.

M6 screw, cage nut & cup washer x 8
are not provided.

¦ Align each rear mounting bracket to a suitable length.

< 1.3 > Installation- How to use the drawer

¦ Hold the handle and slide out the

drawer.

¦ Flip up the LCD to a suitable angle.

¦ Operate the LCD cons ole drawer.

LCD
Panel

Manufacturer

Panel Size ( diagonal )

19-inch Widescreen TFT color LCD

Display pixel ( dots x lines )

1440 x

900

Brightness ( typ. )

250

Contrast Ratio ( typ. )

1000:1

Color

16.7

M

Viewing Angle ( L/R/U/D )

80/80/80/80

Response Tim e ( ms )

5

Dot pitch ( mm )

0.2835

Display Area ( mm )

408.24H x

255.15V

Surface treatm ent

Haze 25%, Hard-coating

Surface hardness

3H

Back light Type

LED

MTBF ( hrs )

30,000

Video
Connectivity

Analog

VGA

Analog 0.7Vp-p

Power

Power Supply

Range

Auto-sensing 100 to 240VAC,
50 / 60Hz

Power Consumption

Screen display ON

25W or less

Power saving mode

4W or less

Power button OFF

1W or less

Environmental
Conditions

Operating
Temperature

0 to 50°C degree

Humidity

20~90%, non-condensing

Storage

Temperature

-5 to 60°C degree

Humidity

5~90%, non-condensing

Shoc k

10G acceleration (11ms duration)

Vibration

5~500Hz 1G RMS random

MKD6219M

1U Rackmount LCD Keyboard Drawer

< Part 2 >

< 2.1 > Product Specifications

Regulatory Safety Approval cUL, FCC & CE

14628 Central Ave,
Chin o, CA 91710
tel: [phone], fax:[phone]

© Copyrigh t 2013 Acnodes, Inc.
All rights rese rved. Product descri pt ion and produc t specif ication s
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.

MKD6219M

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc.
All rights reserved. Product description and product specifi cations
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave,
Chin o, CA 91710
tel: [phone], fax:[phone]

Physical
Specification

Product ( W x D x H )

441.6 x 580 x 44 mm

17.4 x 22.84 x 1.73 inch

Packing ( W x D x H )

590 x 823 x 140 mm

23.2 x 32.4 x 5.5 inch

Net Weight

11.5 kgs / 25

lbs

Gross Weight

16.5 kgs / 36

lbs

Applicable
Format

DVI-D / VGA Input

PC Signal

1440 x 900 x 60Hz

1280 x 1024 x 60 / 75Hz

1280 x 960 x 60Hz

1280 x 760 x 60 / 75Hz

1152 x 864 x 75Hz

1024 x 768 x 60 / 70 / 75Hz

848 x 480 x 60Hz

800 x 600 x 60 / 72 / 75Hz

720 x 400 x 70Hz

640 x 480 x 60 / 72 / 75Hz

640 x 400 x 70Hz

640 x 350 x 70Hz

Key force

55 ± 5g

Travelling distance

3 ± 0.3m m

Switch life

> 10 million life cycle time

Soft ware support

MS Windows 7 / 2008 / 2003 / 2000 / XP / ME / 98 / DOC
Linux / Mac

< 2.2 > Keyboard / Mouse Specifications

Ge

G keyboard integrated with touchpad

Gb

G keyboard integrated with tr ackball

Supporting layouts

America

EMEA

United States

United Kingdom Germany France Spain

Italy Russia Switzerland Netherlands Portugal

Norway

Asia

China Japan Korea Arabia

Turkey

MKD6219M

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc.
All rights reserved. Product description and product specifi cations
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave,
Chin o, CA 91710
tel: [phone], fax:[phone]

< 2.3 > On-screen Display Operation ( OSD )

M embrane Switch Funct ion

Turn the monitor on or off

Display the OSD menu

Act as an Enter key to select screen setting options

Scroll through menu options and adjust

the displayed co ntrol

Exit t he OSD screen
Go back to the previous on-screen sub-men u o r
main menu

Remark : All LED touch buttons in WHITE light.

The LED of Power tou ch button will flash continuously when there is no signal input.

1 All the LED touch buttons will au tom atically turn off after 10 minutes of idle status ( excep t the Power ).

2 Light up all membran e bu tton s, please press any button for 1 - 2 seconds ( excep t the Power ).

MKD6219M

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc.
All rights rese rved. Product descri pt ion and produc t specif ication s
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave,
Chin o, CA 91710
tel: [phone], fax:[phone]

< 2.3 > On-screen Display Operation ( OSD )

OSD C onfiguration Page

Image:

for the brightness, contrast, color temp , red, green, and blue

Geometry:

for the auto adjust, H position, V position, phase and clock

Video:

for the colour, tint, sharpness, noise reduction, DCDi and TV Setup

Audio:

for volume, bass, treble, balance, AV L and mute

Misc:

for the language, OSD position, graphic mode, ratio, reset and timer

MKD6219M

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc.
All rights reserved. Product description and product specifi cations
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave,
Chin o, CA 91710
tel: [phone], fax:[phone]

< Part 3>
<3.1 > Options :

-

Audio

( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )

MKD6219M

1U Rackmount LCD Keyboard Drawer

© Copyrigh t 2013 Acnodes, Inc.
All rights rese rved. Product descri pt ion and produc t specif ication s
are subj ect to c han ge with out notic e. For l atest produ ct informati on,
please visit Acnodes’ web site at www.acnodes.c om.

14628 Central Ave,
Chin o, CA 91710
tel: [phone], fax:[phone]

Model

12V

24V 48V

Input rating

Inp ut voltage:

1 2-Volt

24-Volt

48-Volt

Inp ut range:

9 ~ 18V

18 ~ 36V

36 ~ 75V

Inp ut current

- No load

50 mA

50 mA

5 0 mA

- Full load

4950 mA

2450 mA

1220 mA

Output rating

Output voltage:

1 2-Volt

12-Volt

12-Volt

Output current :

4.16A

4.16A

4.16A

Efficiency

84%

85%

85%

< 3.2 > Options : DC Power

***

For DC power option :

( 1 ) Option excludes 1 x power cord and 1 x AC power adapter.