Acnodes KVH 801 User Manual

Download

Page 1

User Manual

KVH801/1601: 1U rackmount USB Hub KVM switch 8/16-port with 1 user console

KVH801/1601

1U Rackmount USB Hub KVM Switch

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All righ ts reserved. Product descripti on and product speci ficat ions are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 2

KVH801/1601

Le gal Informa tion

Fi rst Englis h p rinting , O ct ober 2 002 Inform ati on i n this docum ent has be en carefully che cked for ac curacy ; howev e r, no g uara ntee is g iven to th e correctne s s o f th e conten ts. The information in thi s doc u men t is subject to cha nge wit hout no tice. W e are n ot liable fo r any injury o r loss that res ul ts from the use o f this equipmen t.

Safety Instruc tions Plea se read all of these ins tructions carefully before you use the devi ce. Save this manual for future refer enc e.

¦ Un pl ug equ ipm ent bef ore c lean in g. Do n’ t us e l iquid or spray deterge nt; use a mois t c lo th. ¦ Keep eq uipme nt away from exc es s ive humi di ty and he at. Prefe rabl y, keep it in an a ir -conditione d e nvironm ent with

tempe ratures not e x ce eding 40º Cel sius (104º Fah renh eit).

¦ When installing , place th e eq uipme nt o n a sturd y, level s urface t o pre ven t it from accidenta lly falling and causing da m

age t o ot her eq uipment o r in ju ry to persons n earb y.

¦ When t he e qui pment is in an open po sition , do not co ve r, block or in an y way obs tru ct the gap between it an d the

power s up pl y. Proper air convection is ne cessary to keep it from o verheating. ¦ Arrang e th e eq uipment ’s powe r co rd in s uch a way th at others wo n’t trip or fa ll over i t. ¦ If you a re using a po wer cord th at d idn’t ship with th e eq uipme nt, ensure that it is r ate d fo r the vo lta ge and c urrent

labeled o n the eq uipme nt ’s electrical ratings l abel. The voltage ra tin g on the c ord s ho uld be h igh er tha n th e one l isted

on th e eq ui pme nt ’s ratings label. ¦ Obs er ve a ll precautions an d wa rnings att ac hed to t he e qui pm ent . ¦ If you d on’t i nte nd o n using the e quipm ent for a long t im e, d isc onnect it from the pow er out let to prev ent being dam

aged by transi ent over -voltage. ¦ Keep al l liquids aw ay from the equ ip ment to minimize the risk of a cciden tal sp illage. Liqui d s pilled on to th e p ower

supply or on o the r hardwa re m ay c aus e d ama ge, fire or elec trical sho ck. ¦ Onl y qua lified s e rvice pers on nel shou ld ope n th e chassis. Op eni ng it yourse lf cou ld damage the eq uipme nt a nd invali

date its warra nt y. ¦ If an y p art of the equ ipmen t becomes d ama ged or stops fun ction in g, h ave it checked b y q uali fie d s ervice p ers onnel.

What the w arranty does not cove r

¦ Any product, on w hich the serial n umb er has b een def aced, mod ified or rem oved. ¦ Da mage, d eteriorat ion or m al fun ction resultin g from :

? Ac cide nt, m isus e , ne gle ct , fi re, wa te r, lightning, o r o the r acts of nature , un auth orized prod uc t modifica tion, or

failure to follow instruction s su ppl ied with the produ ct. ? Re pai r or attemp ted repa ir by anyone not aut horize d by us. ? Any damag e of th e product d ue to shipme nt. ? Re mov al or insta llation of th e prod uct. ? Ca us es ex te rn al to th e p ro duc t, s u ch as electr ic power f luctu ati on or failu re . ? Use of s up plies o r p arts not mee ting o ur s pec ifications. ? No rmal wea r and tea r. ? Any other causes whi ch doe s not relate to a p roduc t defect.

¦ Re mo val, ins ta llati on, and se t -up service charges.

R egulatory Notice s Fede ra l Communic ations C ommiss ion (FCC)

Th is eq uipme nt has be en te sted and fou nd t o c om ply with the limi ts for a Class B di gi tal de vice, p ursu ant to P art 1 5 of th e F CC rul es . The se lim its a re des igned to provide reason abl e protection ag ain s t ha rmful interfe rence in a reside ntial inst al - l ati on. Any chan ges o r mod ific ations m ade to t his equi pm ent ma y void the u se r’s autho rity to ope ra te this e quipm ent. This e quipm ent gene ra tes , u ses, and c an ra dia te rad io frequen cy en ergy an d, if n ot i ns tal led a nd u se d i n a ccorda nc e w ith the in struction s, m ay cause ha rm ful inte rfe rence to radi o c om mu ni ca tio ns . H owever, t here is no guarante e that int erferen ce will not oc cur in a p arti cular ins tal la tion. If this equip ment does cause harmfu l interfe rence to radio or tel ev ision rec eption, which c an be determined by tu rn ing the e qui pment of f and on , the use r is enco urage d to try t o correct th e i nte rfer enc e by one or mo re of the foll owing m eas ure s: ¦ Re -posi tio n or relocate the rec ei ving ante nna . ¦ Increas e the sep aration b etwe en the equi pm ent and receive r. ¦ Co nne ct the equipmen t into an o utlet on a circuit di fferent from that to w hich the receiver is conn ec ted.

1U Rackmount USB Hub KVM Switch

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 3

Contents

< Part 1 > USB Hub DB-15 KVM

KVH801 KVH1601

1.1 Package contents

1.2 KVM port connection

1.3 Built-in USB hub usage & connection

1.4 Specifications

P.1 P.2 P.3 P.4

< Part 2 > Usage

2.1 KVM Button

2.2 Password

2.3 KVM OSD

2.4 KVM Hotkey & Remote Console Hotkey

2.5 DC power 12V, 24V, 48V Input

P.5 P.6 P.7 P.8 P.9

KVH801/1601

1U Rackmount USB Hub KVM Switch

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

Page 4

KVH801/1601

Before Installation

¦ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ¦ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

Unpacking

The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediatel y.

Installation for standalone KVM

Screw A: 2 pcs Screw B: 8 pcs

M3.2 x 4.5 m m M4 x 10 mm

¦ Install each bracket using screws

B provided shown in Figure 1.

¦ Fix the KVM into the rack

Figure 1.

1U Rackmount USB Hub KVM Switch

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 5

Part 1. USB Hub DB-15 KVM

< 1.1 > Package Contents

KVH801 / KVH1601

KVM unit

• KVH801 or KVH1601 KVM unit x 1

• Mounting set w/ bracket & screws x 1

• Power cord ( for KV M ) x 1

Powe r Loca l Co nsole

KVH801

8 7 6 5 4 3 2 1

2 x US B 2.0

( U SB h ub for dev ice conne ctio n )

KVH1601

16 15 14 13 12 11 10 9

8 7 6 5 4 3 2 1

Daisy-chain feature for this model is NOT available.

KVH801/1601

1U Rackmount USB Hub KVM Switch

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

Page 6

KVH801/1601

< 1.2 > KVM port connection

CB-6 / CB-10 / CB-15

¦ 6 / 10 / 15 ft USB KVM cable ¦ Support USB server

USB Servers

USB KVM port

16 15 14 13 12 11 10 9

8 7 6 5 4 3 2 1

USB Servers

USB KVM cable

support USB server

1U Rackmount USB Hub KVM Switch

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

© Copyright 2013 Acnodes, Inc. All right s reser ved . Produc t descr ipt ion and product speci fi cat io ns are subj ect to change w ith out n oti ce. F or lates t product inform ati on, ple ase vis it Acnod es’ we b site at www.ac nodes.c om.

Page 7

< 1.3 > Built-in USB Hub Usage & Connection

16 15 1 4 13 12 11 10 9

8 7 6 5 4 3 2 1

2 x USB 2.0 ( USB hub for device connection )

Flash D isk

Hard disk storage

Keyboard / Mouse

Scanner

Printer

Camera

Page 8

< 1.4 > Specifications

KVH801 KVH1601

¯ KVM Port

Number of ports: 8 or 16

Connector: Combo connector

Connectivity: Combo 2-in-1 VGA + USB KVM cable, 6, 10 or 15 feet

¯ Local Console

Graphic connector: 1 x DB-15

Resolution: Up to 1920 x 1200

Input device: 2 x USB type A for keyboard & mouse

USB hub: 2 x USB type A for sharing other peripheral devices among the computers

¯ Management

Multilingual OSD: English, France, German, Spanish, Italian, Russian, Simplified Chinese,

Japanese

Hotkey combination: Scroll-lock, Cap-lock, Num-lock, Alt, Ctrl & W in

Security: Password enable & disable, up to 8 users profile for port access

PC Selection: Front button, OSD menu & hotkey

¯ Compatibility

Multi-platform: Mix PCs, SUN and Mac G3 / G4 Mac / iMac

Support: Windows 7 / Vista / 2003 / XP, Linux, Unix

¯ Power

Input: 100 or 240V AC at 50 or 60 Hz via IEC type cord

Option DC: 12V / 24V / 48V DC input

Consumption: Max. 12 Watt, Standby 5 Watt

Regulatory Approval: FCC, CE

¯ Environmental

Operating: 0 t o 50°C

Storage: -5 t o 60°C

Relative humidity: 90%, non-condensing

Shock: 50G peak acceleration (11ms, half-sine wave)

Vibration: 58~100Hz / 0.98G (11ms / cycle)

¯ Product Information

Dimension (W x D x H): 443 x 171 x 43.6 mm / 17.4 x 6.7 x 1.72 inch

Net weight: 3 kg / 6.5 lb

¯ Packing Information

Dimension (W x D x H): 500 x 400 x 90 mm / 19.7 x 15.7 x 3.5 inch

Gross weight: 5 k g / 11 lb

Page 9

KVH801/1601

Part 2 . Usage

2.1 KVM Button

Power ON

¦ Turn o ff all se rvers a nd KVM switche s ¦ M ake sure all cables / c onnectors are properly connected

¦ Re comm end Power ON se quence is m onito r, KVM switch finally co mputer

Front Panel - Port LED Indications

8 ports

Bank no . PC port LEDs Channel

button

Bank button

16 ports

Ba n k no. 7-Segm en t BAN K LED indication

PC por t LEDs On lin e : Blue LED o n indicat in g a PC is conne ctin g to the port

Active : Gree n LED o n indicating a selecte d channel

Chan ne l butt on Pres s to selec t channe l fro m 01 t o 16

Ba n k button Selec t th e ban k from 1 to 8

1U Rackmount USB Hub KVM Switch

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939

Page 10

2.2 Password

The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on number pad)

¦ Enable password

1. Press the KVM hotkey Scroll Lock + Scroll Lock + U

2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P

3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field

(Do not use “0” on number pad)

4. In USER level, press Space bar + Enter in user name & password field

Remark: Automatic logout after 10 minutes of inactivity

¦ Set your own user name & password

1. Login the KVM in SUPERVISOR level by pressing “00000000” eight zeros in user name & password field

2. Call KVM OSD menu by pressing t he KVM hotkey Scroll Lock + Scroll Lock + Space Bar

3. Press F1 to the MAIN MENU

4. Select “USER SECURITY”

5. Set password in SUPERVISOR & USER level a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name & password b. In the row 1 to 8 (USER), press Enter to set your own user name & password

6. Press Enter to save the setting or press Esc to cancel the editing without any change

Remark: a. B lank has underscore, while S PACE doesn’t have

b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid

character

¦ Change your password

1. Login the KVM in SUPERVISOR level by pressing your own user name & password

2. Call KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar

3. Press F1 to the MAIN MENU

4. Select “USER SECURITY”

5. Change password in SUPERVISOR & USER level a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name & password b. In the row 1 to 8 (USER), press Enter to change your user name & pass word

6. Press Enter to save the setting or press Esc to cancel the editing without any change

Remark: a. B lank has underscore, while S PACE doesn’t have

b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid

character

¦ Disable your password

1. Press the KVM hotkey Scroll Lock + Scroll Lock + U

2. Logout the KVM by pressing the KVM hotkey Scroll Lock + Scroll Lock + P

3. You don’t need user name & password to access the KVM OSD menu

¦ Forget your password

Please contact your supplier for further support

Remark:

¦ You must press the KVM hotkey within 2 seconds ¦ A beep sound will be heard for successful entering KVM hotkey

Page 11

2.3 KVM OSD

OSD Menu

OSD operation

next to the system name The PC is powered on

next to the system name The PC is selected

F1 Access F1 MAIN MENU F2 Logout the OSD menu F3 Previous menu

Esc Cancel / Quit Enter Complete / Switch to selected port

Switch to previous or next port

PgUp/PgDn Switch to previous bank or next bank

Display port 01 ~ 08 / 09 ~ 16 / 17 ~ 24 / 25 ~ 32

1 / 2 / 3 / 4

Remark: Display port 17 ~ 32 for 32 port model only

F1 Main Menu

LANGUAGE

OSD language change

PORT NAME EDIT

Define port name

PORT SEARCH

Quick searching by port name

USER SECURITY

Change password

ACCESS LIST

Define user access authority

HOTKEY

Change hotkey

TIME SETTINGS

Modify scan display time interval

OSD MOUSE

Modify OSD mouse speed

Page 12

Scroll Lock + Scroll Lock +

Space Bar

Calling OSD menu

Right-button mouse + Esc

Calling OSD menu

Port no.

Switch to specific port

Turn the buzzer ON and OFF

* Default the buzzer is ON

Logout the KVM if password security is

ON. Show up the status windows

2.4 KVM Hotkey & Remote Console Hotkey

Local Console Hotkey Function

Scroll Lock

Switch to previous port

Scroll Lock

Switch to next port

Scroll Lock

PgUp / PgDn

Switch to previous bank or next bank

Scroll Lock + Scroll Lock + Bank no.

Scroll Lock + Scroll Lock + B

Scroll Lock + Scroll Lock + P

Advance hotkeys (for Supervisor login only)

Scroll Lock + Scroll Lock + S

Scroll Lock + Scroll Lock + R

Activate auto-scan mode for connected servers *Press any key to exit the auto-scan mode

Reset all the KVM settings to factory default *Except User Security settings

Scroll Lock

Disable and enable password security *Default security is ON

To enable / disable the screen saving

Scroll Lock

function and 10 minutes auto-logout

*Default the screen saving is OFF

¦ Example of “Scroll Lock + Scroll Lock + Bank no. + Port no.”

- Bank No. : 1 to 8

- Port No. : 01 to 16

- e.g. Bank 1 Port 4 : Scroll Lock + Scroll Lock + 1 + 0 + 4

- e.g. Bank 2 Port 16 : Scroll Lock + Scroll Lock + 2 + 1 + 6 ¦ You must press the hotkey within 2 seconds ¦ A beep sound will be heard for successful entering ¦ The numeric keypad is not supported, while in OSD screen, the arrow keys, PgUp, PgDn, and Enter keys

are supports

Remote Console Hotkey Function

Scroll Lock + Scroll Lock + C Toggle switch between remote & local port

Scroll Lock + Scroll Lock + Q

Turn the buzzer ON & OFF

*Default the buzzer is ON

Scroll Lock

Activate auto-scan mode for remote & local port *The scan time interval is 5 seconds

Scroll Lock

Auto-adjust the video signal

Page 13

KVH801/1601

2.5 DC Power 12V, 24V, 48V Input

Model

12V

24V

48V

Input rating

Input voltage:

12-Volt

24-Volt

48-Volt

Input range:

9 ~ 18V

18 ~ 36V

36 ~ 75V

Input current

- No load

50 mA

- Full load

4950 mA

2450 mA

1220 mA

Output rating

Output voltage:

12-Volt

Output current:

4.16A

Efficiency

84%

85%

Remarks:

¦ Package does not include power cord

1U Rackmount USB Hub KVM Switch

14628 Ce ntral Ave, Chino , CA 91710 tel:909.597.7 588, fax:909.597.1939