Product type
Product category B C D
Manufacturer name, address
Product model number
Year of manufacture
E
TEC
allowance with capability
adjustments when discrete graphics cards
are disabled (from 1 July 2014)
172 kWh/year 188 kWh/year 223 kWh/year
E
TEC
allowance with capability
adjustments when discrete graphics cards
are enabled (from 1 July 2014)
Not applicable Not applicable Not applicable
E
TEC
allowance with capability
adjustments when discrete graphics cards
are disabled (from 1 January 2016)
126 kWh/year 134 kWh/year 162 kWh/year
E
TEC
allowance with capability
adjustments when discrete graphics cards
are enabled (from 1 January 2016)
Not applicable Not applicable Not applicable
Whether all discrete graphics card are
enabled during the test
No No No
Whether switchable graphics mode with
UMA is driving the display during the test
Not applicable Not applicable Not applicable
E
TEC
of highest power-demanding
configuration
95.21 kWh/year 85.29 kWh/year 87.37 kWh/year
Idle state power demand 28.57 Watt 22.87 Watt 23.76 Watt
Sleep mode power demand 1.79 Watt 2.19 Watt 1.82 Watt
Sleep mode with WOL enabled power
demand
1.95 Watt 2.18 Watt 1.94 Watt
Off mode power demand 0.36 Watt 0.35 Watt 0.36 Watt
Off mode with WOL enabled power
demand
0.36 Watt 0.35 Watt 0.36 Watt
Maximum power demand Not applicable Not applicable Not applicable
Internal power supply (IPS) efficiency at
10 %, 20 %, 50 % and 100 % of rated
output power
Not applicable Not applicable Not applicable
External power supply's (EPS) average
active efficiency
89.80% 89.80% 89.80%
Noise levels (the declared A-weighted
sound power level, L
WAd
) of idle mode
3.2 B 3.2 B 3.2 B
Noise levels (the declared A-weighted
sound power level, L
WAd
) of "HDD random
seek" mode
3.2 B 3.2 B 3.2 B
Technical Documentation of (EU) No 617/2013
Desktop computer
Acer Italy s.r.l,
Via Lepetit, 40, 20020 Lainate (MI) Italy
Veriton L4620;
Veriton L6620.
2014
Minimum number of loading cycles that
the batteries can withstand
Not applicable Not applicable Not applicable
Configuration of memory 2 ~ 16 GB 2 GB 4 ~16 GB
Configuration of internal storage 1 piece 1 piece 1 piece
Configuration of discrete television tuner 0 piece 0 piece 0 piece
Configuration of discrete audio card 0 piece 0 piece 0 piece
Configuration of discrete graphics cards 0 piece 0 piece 0 piece
Configuration of discrete graphics cards
category
Not applicable Not applicable Not applicable
The battery in this product cannot be
easily replaced by users themselves
Not applicable Not applicable Not applicable
For products with an integrated display,
the total content of mercury is
Not applicable Not applicable Not applicable
Measurement methodology for ETEC
Measurement methodology for idle mode
Measurement methodology for sleep
mode
Measurement methodology for off mode
Measurement methodology for IPS
efficiency
Measurement methodology for EPS
efficiency
EN 62623:2013 — Desktop and notebook computers —
Measurement of energy consumption:
5.2. Test setup;
5.3.5. Measuring short idle mode;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy;
Annex E.2 (informative) ENERGY STAR® V5 compliant testing
methodology.
EN 62623:2013 — Desktop and notebook computers —
Measurement of energy consumption
5.2. Test setup;
5.3.3. Measuring sleep mode;
5.4. Test conditions;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy.
EN 62623:2013 — Desktop and notebook computers —
Measurement of energy consumption
5.2. Test setup;
5.3.2. Measuring off mode;
5.4. Test conditions;
5.7. True RMS watt meter specification;
5.8. True RMS watt meter accuracy.
Generalized Test Protocol for Calculating the Energy Efficiency
of Internal Ac-Dc and Dc-Dc Power Supplies Revision 6.6
(April,2012).
Not applicable
COMMISSION REGULATION (EU) No 617/2013 of 26 June
2013 implementing Directive 2009/125/EC of the European
Parliament and of the Council with regard to ecodesign
requirements for computers and computer servers:
ANNEX II Ecodesign requirements and timetable:
1.1.1. E
TEC
formula.
Measurement methodology for noise level
Measurement methodology for battery
loading cycles
Sequence of steps for achieving a stable
condition with respect to power demand
Description of how sleep mode was
selected or programmed
Description of how off mode was selected
or programmed
Sequence of events required to reach the
mode where the equipment automatically
changes to sleep mode
Sequence of events required to reach the
mode where the equipment automatically
changes to off mode
The length of time after a period of user
inactivity in which the computer
automatically reaches a power mode that
has a lower power demand requirement
than sleep mode
The length of time before the display
sleep mode is set to activate after user
inactivity
30 minutes
10 minutes
Not applicable
ECMA-109 2nd edition (December 1987) Declared Noise
Emission Values of Computer and Business Equipment:
4. Determination of the declared noise emission values.
ECMA-74 11th edition (December 2010) Measurement of
Airborne Noise emitted by Information Technology and
Telecommunications Equipment:
5. Installation and operating instructions;
6. Method for determination of sound power levels of equipment
in reverberation test rooms;
7. Method for determination of sound power levels of equipment
under essentially free-field conditions over a reflecting plane;
Annex C.15 Equipment category: personalcompute rs and
workstations.
Not applicable
EN 62623:2013 — Desktop and notebook computers —
Measurement of energy consumption:
5.2. Test setup;
5.3.2. Measuring off mode;
5.3.3. Measuring sleep mode;
5.3.5. Measuring short idle mode.
EN 62623:2013 — Desktop and notebook computers —
Measurement of energy consumption
5.2. Test setup;
5.3.3. Measuring sleep mode;
EN 62623:2013 — Desktop and notebook computers —
Measurement of energy consumption
5.2. Test setup;
5.3.2. Measuring off mode;
ENERGY STAR® Program Requirements Product Specification
for Computers, Eligibility Criteria Version 6.0, Rev. Oct-2013:
1.D.4 Sleep Mode.
User information on the energy-saving
potential of power management
functionality
User information on how to enable the
power management functionality
Test parameter for ambient temperature
Test parameter for test voltage
Test parameter for frequency
Test parameter for total harmonic
distortion of the electricity supply system
Test parameter for information and
documentation on the instrumentation,
set-up and circuits used for electrical
testing
50 Hz
3 %
AC source- Chroma 6530
Digital meter- YOKOGAWA WT210
http://www.energystar.gov/index.cfm?c=power_mgt.pr_power_m
gt_users
http://www.energystar.gov/index.cfm?c=power_mgt.pr_power_m
gt_users
25 ℃
230 V
Loading...