Acer VERITON 7500GE User Manual

Veriton 7500GE series
User’s guide
Copyright © 2002 Acer Incorporated All Rights Reserved.
Veriton 7500GE!series User’s guide
Original Issue December 2002
Changes may be made periodically to the information in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.
Record the model number, serial number, purchase date, and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your computer. All correspondence concerning your unit should include the serial number, model number, and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or otherwise, without the prior written permission of Acer Incorporated.
Model Number : _________________________________
Serial Number: ___________________________________
Purchase Date: ___________________________________
Place of Purchase: ________________________________
Acer and the Acer Logo are registered trademarks of Acer Inc. Other company’s product names or trademarks are used herein for identification purposes only and belong to their respective companies.

Notices

FCC notice

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the device and receiver
Connect the device into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/television technician for help
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with noncertified peripherals is likely to result in interference to radio and TV reception.
iii
Caution! Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this computer.
iv
Use conditions
This part complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Remarque à l’intention des utilisateurs canadiens
Cet appareil numérique de la classe B respected toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Important safety instructions

Read these instructions carefully. Save these instructions for future reference.
1 Follow all warnings and instructions marked on the product.
2 Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3 Do not use this product near water.
4 Do not place this product on an unstable cart, stand, or table. The product
may fall, causing serious damage to the product.
5 Slots and openings in the housing and the back or bottom are provided for
ventilation; to ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.
6 This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult your dealer or local power company.
7 Do not allow anything to rest on the power cord. Do not locate this
product where persons will walk on the cord.
8 If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.
9 Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in a fire or electric shock. Never spill liquid of any kind on the product.
10 Do not attempt to service this product yourself, as opening or removing
covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
11 Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a When the power cord or plug is damaged or frayed
b If liquid has been spilled into the product
c If the product has been exposed to rain or water
d If the product does not operate normally when the operating
instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.
e If the product has been dropped or the cabinet has been damaged
f If the product exhibits a distinct change in performance, indicating a
need for service.
12 Replace the battery with the same type as the product's battery we
recommend. Use of another battery may present a risk of fire or explosion. Refer battery replacement to a qualified serviceman.
13 Warning! Batteries may explode if not handled properly. Do not
disassemble or dispose of them in fire. Keep them away from children and dispose of used batteries promptly.
14 Use only the proper type of power supply cord set (provided in your
accessories box) for this unit. It should be a detachable type: UL listed/CSA certified, type SVT, rated 7A 125V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6 meters).
v

Laser compliance statement

The CD or DVD drive in this computer is a laser product. The CD or DVD drive’s classification label (shown below) is located on the drive.
CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM.

Lithium battery statement

CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the
vi
same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.

Macrovision® statement

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Year 2000 compliance statement

Your computer carries the "Hardware NSTL Tested Year 2000 Compliant" logo, which certifies that this model has been tested by NSTL using the YMark2000 test, and has been found to meet NSTL's standards for Year 2000 hardware compliance
.
Notices iii
FCC notice iii Important safety instructions iv Laser compliance statement v Lithium battery statement v Macrovision® statement vi Year 2000 compliance statement vi
1 First things first 1
Package contents 3 Taking care of your computer 4
Important tips 4 Cleaning and servicing 4 Asking for technical assistance 5
Accessing the user’s guide 6
2 System tour 7
Features 9
Performance 9 Multimedia 9
Connectivity 9 Front panel 11 Rear panel 13 Keyboard 15
Function keys 16
Lock keys 16
Windows keys 17
Cursor keys 17
Palm rest 17
Volume control/Mute knob 18
Multimedia keys 18
Internet/Suspend keys 19
Programmable keys 19 Mouse 20 Disk drives 21
Floppy drive 21
CD-ROM/DVD-ROM/CD-RW drive 22
Hard disk 24
Contents
3 Setting up your computer 25
Arranging a comfortable work area 28
viii
Adjusting your chair 28 Positioning your PC 28 Positioning your monitor 29 Positioning your keyboard 29 Positioning your mouse 29
Connecting peripherals 30
Connecting your mouse 30 Connecting your keyboard 32 Connecting a monitor 34
Connecting the power cable 35 Turning on your computer 36 Turning off your computer 37 Connecting options 38
Connecting your printer 38
Connecting the modem (optional) 39
Connecting to the network 40
Connecting multimedia devices 41
Connecting USB devices 44
4 Upgrading your computer 47
Installation precautions 50
ESD precautions 50
Preinstallation instructions 50
Post-installation instructions 51 Opening your computer 52
To remove the side panel 52
To replace the side panel 53 Internal components 55 System boards 56
Mainboard layout 56
Audio board 59 Upgrading your computer 60
Installing additional memory 60
Replacing the hard disk 62
Installing an expansion card 64
5 System utilities 67
Acrobat Reader 70 Acer LANScope (optional) 71 Norton AntiVirus 72 NTI CD-Maker (for models with CD-RW) 73 PowerDVD (for models with DVD) 74
BIOS utility 75 Reinstalling programs 76
Recovering your system 76
6 Frequently asked questions 77
Index 83
ix
x

1 First things first

This chapter describes the contents of your computer package and also provides important tips on how to take care of your computer.

Package contents

Before you unpack your computer, make sure that you have enough space to set up your computer.
Carefully unpack the carton and remove the contents. If any of the following items are missing or damaged, contact your dealer immediately:
Veriton 7500GE series
Items contained in the accessory box
USB or PS/2 keyboard
USB or PS/2 mouse
User’s guide and installation poster
Other user documentation and third-party software
3
1 First things first4

Taking care of your computer

Please read the important instructions listed in this section. Following these instructions will help you maximize the durability of your computer.

Important tips

Do not expose the computer to direct sunlight. Do not place it
near sources of heat, such as a radiator.
Do not subject the computer to magnetic fields.
Do not expose the computer to rain or moisture.
Do not spill water on the computer.
Do not subject the computer to heavy shock or vibration.
Do not expose the computer to dust and dirt.
Never place the system on uneven surfaces.
Do not step on the power cord or place heavy objects on top of it.
Carefully route the power cord and any cables away from personal traffic.
When unplugging the power cord, do not pull on the cord itself
but pull on the plug.
The total ampere rating of the equipment plugged in should not
exceed the ampere rating of the cord if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating.
Check the documentation that came with your software programs
to see if you can select other combinations of resolution and color. These adjustments could make viewing the screen more comfortable.

Cleaning and servicing

To clean your computer and keyboard
1 Turn off the computer and unplug the power cord.
2 Use a soft cloth moistened with water and gently wipe the exterior
of the computer and the keyboard. Do not use liquid or aerosol cleaners.
To clean your pointing device
To clean a regular mouse (with rubber ball)
1 Open the circular cover underneath the mouse.
2 Take out the rubber ball and wipe it with a soft, damp cloth.
3 Put the ball back and close the cover.
To clean an optical mouse
For users of an optical mouse, refer to the documentation that came with your mouse for maintenance instructions.
To clean your monitor
Make sure that you keep your screen clean. For cleaning instructions, refer to the documentation that came with your monitor.
When to contact a service technician
If you dropped and damaged the computer
If liquid has been spilled into the computer
If the computer is not operating normally
If a computer problem persists even after you have checked and done the troubleshooting tips discussed in the “Frequently-asked questions” section on page 77
If your problem is not listed in the “Frequently-asked questions” section on page 77
If you want to replace or upgrade any of your computer’s internal components
5

Asking for technical assistance

For technical assistance, contact your local dealer or distributor. You may also access the Web site (www.acersupport.com on how and where to contact the service centers available in your area.
) for information
1 First things first6

Accessing the user’s guide

This user’s guide is also available on your computer as an Adobe Acrobat PDF file.
To access the user’s guide (for Windows XP)
1 On the Windows XP taskbar, click on the Start button then select
Help and Support Center.
2 On the Help and Support Center home page, double-click the
Veriton 7500GE series Online icon.
To access the user’s guide (for Windows 2000)
1 Double-click on the Veriton 7500GE series Online icon on your
Windows desktop.

2 System tour

This chapter discusses the features and components of your computer.

Features

Here are just a few of your computer’s many features:

Performance

Intel Pentium®/Celeron CPU
Intel 845GE/ ICH4
System memory DDR-SDRAM 266/333, 2 DIMM slots, Expandable to 2GB
Power management function
3.5-inch floppy drive
DVD-ROM, CD-ROM or CD-RW drive
High-capacity, Enhanced-IDE hard disk
Supports USB 2.0 high-performance peripherals

Multimedia

3-D quality audio system via onboard audio controller
Audio-in/Line-in, Audio-out/Line-out, Headphone-out, and Microphone-in interfaces
9
Note: The system has two microphone-in jacks (front and rear). However, you can not use both of them at the same time. By default, your system enables the microphone-in jack in front and disables the one at the back.

Connectivity

Two PS/2 interfaces for mouse and keyboard
One serial port
2 System tour10
One parallel port
One VGA port
Six Universal Serial Bus (USB)1.1/1.2 ports (two on the front and four on the rear panel)
High-speed V92, 56K Fax/modem (optional)
10Base-T/100Base-TX network support with remote wake-up function

Front panel

Your computer’s front panel consists of the following:
Label Icon Component
1 CD-ROM/DVD-ROM/CD-RW tray
11
2 Stop/Eject button
3 Skip/Forward button
4 Hard disk activity light-emitting diode (LED)
5 LAN activity LED
6Power LED
7 Power button
8 CD-ROM/DVD-ROM/CD-RW LED
9 Volume control
10 CD-ROM/DVD-ROM/CD-RW Headphone/Earphone port
Label Icon Component
11 5.25-inch drive bays
12 3.5-inch floppy drive
13 Floppy drive LED
14 Floppy drive eject button
15 Speaker-out/Line-out port
2 System tour12
16
Microphone-in jack (front)
17 USB ports
Note: The system has two microphone-in jacks (front and rear). However, you can not use both of them at the same time. By default, your system enables the microphone-in jack in front and disables the one at the back.
see note

Rear panel

Your computer’s rear panel consists of the following:
Label Icon Color Component
1 Voltage selector switch
13
2 Power cord socket
3 Burgundy Parallel/Printer port
4 White Network port
5 Power jack (for external speakers)
6 Power supply
7 Green PS/2 mouse port
8 Purple PS/2 keyboard port
9 Black USB ports
Label Icon Color Component
2 System tour14
10 Teal or
Tur quoi se
11 Blue CRT/LCD monitor port
12 Pink Microphone-in jack (rear)
13 Lime Audio-out/Line-out jack
14 Light blue Audio-in/Line-in jack
15 Handset line port
16 Telephone line port
17 Expansion slots
Serial port
For information on how to connect the peripherals, see “Connecting peripherals” on page 30 and “Connecting options” on page 38.
15

Keyboard

The keyboard has full-sized keys that include separate cursor keys, two Windows keys, and twelve function keys.
For information on how to connect your keyboard, see “Connecting peripherals” on page 30.
No. Description
1 Function keys
2Caps lock
3 Windows logo key
4 Application key
5 Cursor keys
6 Palm rest
7 Num lock key
8 Scroll lock key
9 Volume control/Mute knob
2 System tour16
No. Description
10 Multimedia keys
11 Internet/Suspend keys
12 Programmable keys

Function keys

The function keys, F1 - F12, let you perform specific functions, depending on the application that uses them.

Lock keys

The keyboard has three lock keys which you can toggle on and off to switch between two functions.
Lock key Description
Caps Lock When activated, all alphabetic characters typed
appear in uppercase (same function as pressing Shift + <letter>).
Num Lock When activated, the keypad is set to numeric
mode; i.e., the keys function as a calculator (complete with arithmetic operators such as +, -, * and /).
Scroll Lock When activated, the screen moves one line up or
down when you press the up arrow or down arrow respectively. Take note that Scroll Lock may not work with some applications.

Windows keys

The keyboard has two keys that perform Windows-specific functions.
Key Description
Windows logo key Start button. Combinations with this key
perform special functions, such as:
Windows + Tab: Activate the next Taskbar button
Windows + E: Explore My Computer
Windows + F: Find Document
Windows + M: Minimize All
Shift + Windows + M: Undo Minimize All
Windows + R: Display the Run dialog box
Application key Opens the applications context menu (same
function as clicking the right button of the mouse).
17

Cursor keys

The cursor keys, also called the arrow keys, let you move the cursor around the screen. They serve the same function as the arrow keys on the numeric keypad when the Num Lock is toggled off.

Palm rest

The detachable palm rest provides you a comfortable place to rest your hands while typing.

Volume control/Mute knob

The volume control/mute knob controls the speaker volume. Turn it clockwise or counterclockwise to adjust the volume. Press it to toggle between mute and sound.
2 System tour18

Multimedia keys

Allow you to conveniently play, pause, stop, step forward, or step back a song or movie using your keyboard.
Icon Key Description
Play/Pause Press to start playing the audio track or
video file. Press again to pause.
Stop Press to stop playing the audio track or
video file.
Forward Press to skip forward to the next track or
video file and start playing.
Icon Key Description
Backward Press to skip backward to the previous
track or video file and start playing.

Internet/Suspend keys

The Internet/Suspend keys consist of three buttons:
Icon Key Description
Email Launches your email application.
19
Web browser
Suspend Press this button to put system to sleep.
Launches your current default browser.

Programmable keys

The programmable keys help you directly access a URL (Web site) or launch any program, files, or application in your system. The fifth key is set to launch the Windows Media Player. If you want to configure the settings of each key, right click on the Magic Keyboard icon located on the desktop.
Loading...
+ 65 hidden pages