Acer UM.QB6EE.A01 Quick Start Guide
LCD monitor
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
Turn off the LCD monitor and unplug the power cord.
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor
outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
Monitor-to-PC signal cable is frayed or damaged.
Liquid spills onto the LCD monitor or the monitor is exposed to rain.
The LCD monitor or case is damaged.
English
Package contents
LCD
monitor
Power cord
Audio
cable
(optional)
VGA cable
(optional)
DVI cable
(optional)
DP cable
(optional)
USB cable
(optional)
Quick start
guide
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models)
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected
models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power
cord.
2. Connect the signal cable to the VGA and/or DVI-D (optional)
and /or DP (optional) input socket of the monitor, and the
VGA and/or DVI-D (optional) and/or DP (optional) output
socket of the graphics card on the computer. Then tighten
the thumbscrews on the signal cable connector.
3. Optional: Connect the audio input socket (AUDIO IN) of the
LCD monitor and the line-out port on the computer with
the audio cable.
4. Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
5. Insert the monitor power cable into the power port at the
back of the monitor.
6. Plug the power cords of your computer and your monitor
into a nearby electrical outlet.
USB
USB
USB3.0 port
-supporting fast charge
USB3.0 port
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This device generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this device does cause harmful interference to radio
or television reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain
compliance with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B
limits may be attached to this equipment. Operation with non-certified peripherals is likely to result
in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user
authority, which is granted by the Federal Communications Commission, to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Notice: Canadian users
English
&$1 ,&(6%10%%
External controls
1&2 Power button Turns the monitor on/off. Blue indicates power on. Amber indicates
standby/ power saving mode.
3&4 </> Minus / Plus If the OSD is active, press the Minus or Plus buttons to toggle between
the OSD options. If the OSD is inactive, press the Minus or Plus buttons to
adjust the volume. (Optional)
5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.
6 Auto Auto If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive,
press Auto and the monitor will automatically optimize the display
position, focus, and clock of your display.
7
Empowering
Key
a. When the OSD menu is active, this button will act as the exit key ( exit
OSD menu).
b. When the OSD menu is inactive, press this button to select scenario
mode.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements
and other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and
RoHS Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for
the setting of ecodesign requirements for energy-related product.
English
Find manuals and other documents for your Acer
product on the official Acer support website.
SPECIFICATION
LCD Panel
Driving system TFT Color LCD
Size
Pixel pitch
Brightness 250cd/m
2
(Typical)
Contrast 100,000,000:1Max. (ACM)
Panel Type
Video R, G, B Analog Interface
H-Frequency 30KHz – 80KHz
V-Frequency 55-75Hz
Display Colors 16.7M Colors
Dot Clock 180MHz
Max. Resolution 1920 x 1080@60Hz
Plug & Play VESA DDCCI/DDC2B
Power consumption
@200cd/m
2
ON Mode
Sleep Mode 0.45W(typ.)
Off Mode 0.35W(typ.)
Input Connector
D-Sub
DVI-D 24pin (Only Dual-Input Model)
DisplayPort 19pin (Only DP Model)
USB Hub / USB3.0 x 4 (Only USB Hub Model)
Input Video Signal
Analog:0.7Vp-p(standard), 75 OHM, Positive
Digital signal (Only Dual-Input Model)
DP signal (Only DP Model)
Speakers 2W x 2(Only Audio-Input Model)
Maximum Screen Size
Power Source 100-240V~, 50/60Hz
Environmental
Considerations
Operating Temp: 5° to 35°C
Storage Temp: -20° to 60°C
Operating Humidity: 10% to 85%
Dimensions
Weight (N. W.)
Mechanism spec
Tilt: -5° to +35° Only at the highest point can 35 degrees of
recline be offered for the angle of elevation.
Swivel: +60° to -60°
Height adjustment: 0mm to 150mm
Pivot: 0° to 90°
Detachable foot stand: Detachable foot stand with screw release
External
Controls:
Switch / Buttons
Power Button
Left(<) /Right(>)
MENU/ENTER
Auto/ Exit
E(Empowering) Key
Functions
Contrast
Brightness
ACM On\Off
Focus
Clock
H. Position
V. Position
(Warm) Color
(Cool) Color
RGB Color temperature
Language
OSD position. timeout
Auto configuration (only Analog input model)
Input signal Selection (only Dual input model)
DDCCI On/Off
Display information
Reset
Exit
* All specifications are subject to change without notice.
Regulatory Compliance
ME61
N214
R33037
R
LR60441
C US
LR60441
&86
ᑒኁጒ
LR60441
&86
$*;.
Disposal of waste equipment by user in private household in the European Union
Warning Message for Magnet
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more
information ab ut where you can drop off your waste equipment for recycling,
please contact your local city office, your household waste disposal service or the
shop where you purchased the product.
Certain electronic devices such as hard drives, USB devices, tablet computers,
laptops, cellphones, watches, earphones, speakers, credit cards, magnetic ID
cards, etc. are sensitive to magnetic fields and may be damaged permanently
or temporarily disabled if exposed to a magnetic field that is too strong.
Magnet
Electronic devices should not be put close to or directly on the magnetic
area of monitor base.
English
Viewable angle 178° (H) 178° (V) (CR=10)
Response time 6ms (on/off)
23. "W (6cm)
0.27mm(H) x 0.27mm(V)
,36
21.9W(typ.)
Horizontal:527mm
Vertical:296mm
554.4 (W) x 379.1~529.1(H) x 221.2(D)mm
6.42kg Unit (net)
08/=
Q41G24M1786A
Loading...