Acer TravelMate 6000 User Manual

Notice for EasyPort connection

For TravelMate 5000

Follow these steps to connect Acer EasyPort:

1 Remove the cap from the orange power jack on the back of the EasyPort, next

to the connector cable.

2 Insert the cap into the 90W DC-in jack on the front of the EasyPort.

3 Plug the EasyPort power cord into the orange power jack on the back of the

EasyPort.

4 Connect the EasyPort power cord (1) and cable to the computer (2).

5 Plug the power adapter that came with your notebook into the 135W DC-in

jack (3) on the EasyPort.

Warning: When you plug in the power adapter, please make sure you use the right
port. using the wrong port will cause serious damage

Note:

1.The LAN port on Acer EasyPort III supports 10/100Mbps Fast Ethernet. When
connected, the Giga LAN on TravelMate 5000 will be disabled. Acer EasyPort III will
also disable the system VGA and S-Video ports when connected.

2.The Acer EasyPort III supports USB 2.0 on all computer models manufactured after
2003 except for TravelMate 360/420/540/650/660 models.

Notice for EasyPort connection

For TravelMate 6000/8000 and other models

Follow these steps to connect Acer Easyport

1 Connect the cable to the computer (1).

2 Plug the power adapter that came with your notebook into the 90W DC-in

jack (2) on the EasyPort.

Warning: When you plug in the power adapter, please make sure you use the right
port. Using the wrong port will cause serious damages

Note:

1.The LAN port on Acer EasyPort III supports 10/100Mbps Fast Ethernet. When
connected, the Giga LAN on TravelMate 6000/8000 will decrease to 10/100Mbps. Acer
EasyPort III will also disable the system VGA port when connected.

2.The Acer EasyPort III supports USB 2.0 on all computer models manufactured after
2003 except for TravelMate 360/420/540/650/660 models.